Hatch CO-DI-1020 User Manual

STORAGE
STORAGE
STORAGE
OVERALL
OVERALL
OVERALL
SHIPPING
MODEL
WIDTH
DEPTH
HEIGHT
WIDTH
DEPTH
HEIGHT
WEIGHT
APP.
CO-DI-1020
15"
23"
13"
21.5"
29.5"
28"
140lb
381mm
584mm
330mm
546mm
749mm
711mm
63.6kg
CO-DI-2020
25"
23"
13"
31.5"
29.5"
28"
200lb 635mm
584mm
330mm
800mm
749mm
711mm
90.9kg
REFRIGERATED COOLER DISPENSER
-STAINLESS STEEL -DROP-IN
-HEAVY DUTY -SELF-CONTAINED
-ADJUSTABLE TEMPERATURE RANGE -PLUG-IN OPERATION
Model Series: CO-DI-
APPLICATION:
-Serving lines and stations
-Lean footprint design (space saving)
CAPACITY:
-Racks: to maximum height of 13”
-Baskets: to maximum height of 13”
DISPENSES:
-Racks or baskets of milk or beverage cartons, prepared salad bowls, packaged novelties or misc. chinaware
SPECIFICATIONS:
-Stainless steel; Type 304
-“Heliarc” and spot welded construction
-Drop-in chassis installation with compressor and controls where unit is required to operate as a self-contained unit
-Cabinet is complete with evaporator tubing, compressor, controls and bottom drain
-Fan cooled hermetically sealed condensing unit
-Evaporator tubing is refrigerant grade solid wall copper and is located all around the interior liner
-Sealed interior liner is isolated from cabinet exterior by a plastic breaker strip for condensation control
-Interior liner is separated from cabinet exterior on all sides by a layer of rigid non-sag insulation
-Adjustable temperature range from 0°F (-18°C) to +55°F (+13°C)
-Approved power supply cord with 3 prong end cap
ELECTRICAL DATA:
-120V, 60Hz, 1 Phase, 8 Amps
-NEMA 5-15 End Cap
OPTIONAL FEATURES [1]:
-NP - Stainless steel nameplate
Stacking storage only. This model is not self-leveling.
Loading...