Hatch AFDH-M-2 User Manual
© Copyright 2012 Hatch Industries Limited
Shown with
optional plate rods
Shown with optional
split cover and platform
HEATED BASE/PLATE DISPENSER
- STAINLESS STEEL - MOBILE
- CANTILEVER DESIGN - DUAL HEAT
- SELF LEVELING FIELD ADJUSTABLE - 1 TO 3 STACK
Model Series: AFDH-M-*
APPLICATION:
-Tray make-up systems
-Back up storage
CAPACITY:
-Approximately 48 plates per stack
-Approximately 50 bases per stack
DISPENSES:
-China or special composition plates
(e.g. Alicite, Thermacite, etc.) up to and including
10” plate diameter
-Stainless steel or alloy composition bases
up to and including 10” base diameter
SPECIFICATIONS:
-Stainless steel; Type 304
-“Heliarc” and spot-welded construction
-All seams fully welded & polished
-Fully insulated model
-Channel reinforced base for rigidity and stability
-Cantilever dispensing system in a steel upright uni-frame enclosure
-Dispensers are equipped with non-rusting springs
that are heat treated for strength & durability
-Carrier platform is full length as standard (split carrier optional)
-Cover is full length as standard (split cover optional)
-Cover is double panel stainless steel, insulated,
hinged fold back design with handle
-Convection type heating with fan forced horizontal air flow
-Variable heat setting thermostat with “OFF” position
-“ON-OFF” toggle switch with “POWER ON” and
“THERMOSTAT ON” indicator pilot lights
-Internally mounted selector switch for “LOW HEAT” and
“HIGH HEAT” to prevent accidental changing of heat setting
-Approved power supply cord with 3 prong end cap
-Stainless steel push handle with grips
-Wrap-around bumper with stainless steel insert for strength and durability
-4 > 5” swivel, non-marking casters with 4 side brakes
OPTIONAL FEATURES [1]: ELECTRICAL DATA:
-NP - Stainless steel nameplate -208V, 60Hz, 1 Phase, 2800 Watts, 20 Amp
-SCP - Split covers and split platforms -NEMA 6-20 End Cap
-CB - Corner bumpers
-PR - Plate rods with perforated platforms for smaller wares
-Remove (*) from model code for non-NSF models
Length
Width
Shown with optional
split cover and platform
MODEL
STACKS
WIDTH
LENGTH
LENGTH
SHIPPING
PER
INCLUDING
INCLUDING
INCLUDING
WEIGHT
UNIT
BUMPER
BUMPER
HANDLE
APP.
AFDH-M-1*
1 Stack
21" - 533mm
32" - 813mm
34.5" - 876mm
200lb - 91.0kg
AFDH-M-2*
2 Stacks
28.5" - 724mm
32" - 813mm
34.5" - 876mm
270lb - 122.7kg
AFDH-M-3*
3 Stacks
40.5" - 1029mm
32" - 813mm
34.5" - 876mm
330lb - 150kg
Shown with
optional plate rods
© Copyright 2012 Hatch Industries Limited
HEATED BASE/PLATE DISPENSER
- STAINLESS STEEL - MOBILE
- CANTILEVER DESIGN - DUAL HEAT
- SELF LEVELING, FIELD ADJUSTABLE - 1 TO 3 STACK
Model Series: AFDH-M-*
CAPACITY:
-Approximately 48 plates per stack
-Approximately 50 bases per stack
ELECTRICAL DATA:
-208V, 60Hz, 1 Phase, 2800 Watts, 20 Amp
-NEMA 6-20 End Cap
Overall height of all listed units is 37 ½” (953mm).
Loading...