Hatch ADTH-DI-06.37 User Manual
MAXIMUM
COUNTER
OVERALL
SHIPPING
MODEL
WATTAGE
CHINAWARE
CUTOUT
FLANGE
WEIGHT
DIAMETER
DIAMETER
DIAMETER
APP.
ADTH-DI-06.37*
200
4" to 6" - 102 to 152mm
8 3/8" - 213mm
9 3/8" - 238mm
12lb - 5.5kg
ADTH-DI-08.37*
300
6" to 8" - 152 to 203mm
10 3/8" - 263mm
11 3/8" - 289mm
13lb - 5.9kg
ADTH-DI-10.37*
300
8" to 10" - 203 to 254mm
12 3/8" - 314mm
13 3/8" - 340mm
17lb - 7.7kg
ADTH-DI-12.37*
300
10" to 12" - 254 to 305mm
14 3/8" - 365mm
15 3/8" - 390mm
22lb - 10kg
© Copyright 2012 Hatch Industries Limited
ADJUSTABLE ROUND TUBE DISH DISPENSER
-ADJUSTABLE CHINA DIAMETER -DROP-IN
-STAINLESS STEEL -HEATED, ENCLOSED
-SELF LEVELING -FIELD ADJUSTABLE
Model Series: ADTH-DI-*
APPLICATION:
-Cafeterias
-Serving lines
-Modular buffet systems
CAPACITY:
-Approximately 5 to 6 doz.
plates per tube
-Refer to factory for
bowl capacities
DISPENSES:
-Stackable Plates
-Stackable Bowls
-Misc. stackable round chinaware
SPECIFICATIONS:
-Stainless steel; Type 304
-“Heliarc” and spot-welded construction
-Die formed uni-frame assembly with
upright support channels
-Carrier head is suspended by a series of calibrated
springs from an under carriage frame assembly
-Dispensers are equipped with non-rusting springs
that are heat treated for strength & durability
-Drop-In counter design
-Easily adjustable for china diameter and weight load
-Adjustment angles act as china guides
-“On/Off” switch and pilot light are mounted on the top flange ELECTRICAL DATA:
-Approved power supply cord with 3 prong end cap -120V, 60Hz, 1 Phase
(208V & 240V units available upon request)
Note: Remove (*) from model code for non-NSF models -NEMA 5-15 End Cap
Height from mounting surface to bottom of unit is 27.5” (698.5mm).
Inside plate capacity is 21” (533.4mm) to the top of the flange.
Shorter sizes available upon request.
COUNTER
OVERALL
MODEL
CUTOUT
FLANGE
DIAMETER
DIAMETER
ADTH-DI-06.37*
8 3/8" - 213mm
9 3/8" – 238mm
ADTH-DI-08.37*
10 3/8" - 263mm
11 3/8" – 289mm
ADTH-DI-10.37*
12 3/8" - 314mm
13 3/8" – 340mm
ADTH-DI-12.37*
14 3/8" - 365mm
15 3/8" – 390mm
© Copyright 2012 Hatch Industries Limited
ADJUSTABLE ROUND TUBE DISH DISPENSER
DROP-IN
BASIC LAYOUT AND INSTALLATION
Model Series: ADTH-DI-*
Height from mounting surface to bottom of unit is 27.5” (698.5mm).
Inside plate capacity is 21” (533.4mm) to the top of the flange.
Shorter sizes available upon request.
Loading...