REFRIGERATED ROUND TUBE DISH DISPENSER
- STAINLESS STEEL - MOBILE
- SELF LEVELING; FIELD ADJUSTABLE - ENCLOSED
- SELF CONTAINED OPERATION - 2 & 4 TUBE UNITS
Model Series: RDT-M-
APPLICATION:
-Cook chill tray make-up systems
-Serving lines
CAPACITY:
-Approximately 5 to 6 doz. plates per tube
-Refer to factory for bowl capacities
DISPENSES:
-Stackable Plates; Stackable Bowls
SPECIFICATIONS:
-Stainless steel; Type 304
-“Heliarc” and spot-welded construction
-Removable, field adjustable drop-in tube dispensers (DTO-DI)
-Dispensers are equipped with non-rusting springs
that are heat treated for strength & durability
-Fan cooled hermetically sealed condensing unit
-Adjustable temperature range from 0 F (-18 C) to +55 F (+13 C)
-Cabinet is complete with evaporator tubing,
1/5 hp compressor, controls and bottom drain
-Drain leads from bottom of interior tank to the end of base
under the compressor where it is recessed for safety
-Sealed interior liner is isolated from cabinet exterior
by a plastic breaker strip for condensation control
-Interior liner is separated from cabinet exterior on all
sides by a layer of rigid non-sag insulation
-Evaporator tubing is refrigerant grade solid wall
copper and is located all around the interior liner
-Removable door panels allow easy access to condensing unit and controls
-Removable clear lexan covers with storage clips on side of unit
-Wrap-around perimeter bumper
-5” all swivel, heavy duty, non-marking casters with brakes
-Approved power supply cord with 3 prong end cap
OPTIONAL FEATURES [1]: ELECTRICAL DATA:
-NP - Engraved stainless steel nameplate -120V, 60Hz, 1 Phase, 8.3Amps
-BL - Bar lock assembly for cover -NEMA 5-15 End Cap
See model series DTO-DI for more information on Tube Dispensers.
1 and 3 tube units available.
China diameter to be supplied with order.
NSF approved Tube Dispensers available.
REFRIGERATED ROUND TUBE DISH DISPENSER
- STAINLESS STEEL - MOBILE
- SELF LEVELING, FIELD ADJUSTABLE - ENCLOSED
- SELF CONTAINED OPERATION - 2 TUBE UNITS
Model #: 2RDT-M-
CAPACITY:
-Approximately 5 to 6 doz.
plates per tube
-Refer to factory for
bowl capacities
ELECTRICAL DATA:
-120V, 60Hz, 1Ph,
8.3Amps
-NEMA 5-15 End Cap
-Other voltages available
OPTIONAL:
-Projected or sidemount models
Sizes are approximate – subject to change.
China diameter to be supplied with order.
See model series DTO-DI for more information on Tube Dispensers.
NSF approved Tube Dispensers available.
1 and 3 tube units available.