© Copyright 2012 Hatch Industries Limited
ADJUSTABLE ROUND TUBE DISH DISPENSER
- STAINLESS STEEL - MOBILE
- SELF LEVELING - ENCLOSED
- FIELD ADJUSTABLE - HEATED
- ADJUSTABLE CHINA DIAMETER
Model Series: ADTH-M-*
APPLICATION:
-Cafeterias & Serving lines
-Tray make-up systems
-Back up storage
-Modular buffet systems
CAPACITY:
-Approximately 5 to 6 doz. plates per tube
-Refer to factory for bowl capacities
DISPENSES:
-Stackable Plates
-Stackable Bowls
-Misc. stackable round chinaware
SPECIFICATIONS:
-Stainless steel; Type 304
-“Heliarc” and spot-welded construction
-Removable top; all seams fully welded & polished
-Double wall insulated construction
-Accommodates various diameter ranges of round drop-in
tube dispensers (ADTO-DI)
-Dispensers are equipped with non-rusting springs
that are heat treated for strength & durability
-Push handle on one end of unit
-Wrap-around bumper
-Clean out door in bottom
-4 > 5” swivel, non-marking casters with 4 side brakes
-Variable heat setting thermostat with on/off pilot light indicator
-Approved power supply cord with 3 prong end cap
OPTIONAL FEATURES [1]: ELECTRICAL DATA:
-NP - Stainless steel nameplate -120V, 60Hz, 1 Phase
-PP- Push posts on top of unit -NEMA 5-15 End Cap
(Handle is removed when adding push posts) -Wattage varies by model
-TC - Tube covers for tube dispensers
-LAM - Laminate décor on all sides
-PC - Powder epoxy coating
-Remove (*) from model code for non-NSF models
5 and 6 tube units available.
China diameter to be supplied with order.
See model series ADTO-DI for more information on Tube Dispensers
© Copyright 2012 Hatch Industries Limited
ADJUSTABLE ROUND TUBE DISH DISPENSER
- STAINLESS STEEL - MOBILE
- SELF LEVELING - ENCLOSED
- FIELD ADJUSTABLE - HEATED
- ADJUSTABLE CHINA DIAMETER - 1 TUBE UNITS
Model #: 1ADTH-M-*
CAPACITY:
-Approximately 5 to 6 doz.
plates per tube
-Refer to factory for
bowl capacities Optional Tube Cover
ELECTRICAL DATA:
-120V, 60Hz, 1Ph,
700Watts, 5.8Amp
-NEMA 5-15 End Cap
-Other voltages available
Height to unit top is 36” (914mm).