HASBRO Battleship Torpedo Attack User Manual

®
AGES 8+
INSTRUCTIONS FOR 2 PLAYERS
CONTENTS: • Ocean grid with base • 1 Torpedo tray
• 4 Peg trays • 2 Periscopes with visors • 8 Torpedo marbles
• 2 Torpedo launchers • 10 Large ships • 10 Small ships
• Red scoring pegs • White scoring pegs • Label sheet
YOUR MISSION
In this game, you must first locate an opponent’s ship by finding all of its coordinates; then you must sink it by firing torpedoes at it!
ON YOUR FIRST MISSION
1. Remove the game parts from their wrappings. Discard all waste.
2. Apply the labels as shown in Figure 1, below.
Fig. 1
1
Tray x 4
Peg
2
Launcher x 2
Torpedo
3
Periscope
Unit x 2
4
PREPARE FOR BATTLE!
Commanders sit opposite each other with the game on a table between them.
1. The ocean grid: Take the ocean grid and the white plastic base out of the box. Flip the base over and put it back in so that the chute leads to the exit hole (see Figure 2). Then flip the ocean grid over and drop it into the box the right way up.
2
2. The torpedo tray: Slot the
5
guide only do not print
2
guide only do not print
torpedo tray into the position shown in Figure 2, by fitting it into the ocean grid holes. Then slot the 4 peg trays into their holes (two trays on each side of the ocean grid).
3. The periscopes: Slide a periscope onto each torpedo launcher (see Figure 3).
4. The torpedo launchers: Slot a torpedo launcher onto each end of the grid by fitting it into the ocean grid holes. Then clip a visor onto the back of each periscope. See Figure 4.
Torpedo Tray
Exit Hole
Fig. 2
Peg Tray x 4
Fig. 3
5. The torpedo marbles: Drop 3 torpedo marbles into each launcher as shown in Figure 5.
6. The scoring markers: Set each scoring marker on the ocean grid to zero.
7. The pegs: Fill one of your peg trays with red pegs and the other with white pegs. Your opponent does the same.
8. The ships: Divide the ships so that each commander has the same fleet of 10. See Figure 6, on page 4.
Fig. 4
Visor
Fig. 5
Torpedo
3
Loading...
+ 5 hidden pages