Hasbro 87377, 87386 User Manual

FCC STATEMENT: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy, and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

- Consult the dealer or an experienced radio/TV technician for help.

Some poses may require additional support. Product and colors may vary. © 2006 Lucasfilm Ltd. & ® or TM where indicated. All rights reserved. ®* and/or TM* & © 2007 Hasbro. All Rights Reserved. TM & ® denote U.S. Trademarks Package U.S. Patent Pending

AGES 3

87377/87386 Asst.

PN: 6688860000

Battery Symbols

Battery Statements

updated 11.7.05

AAA AA C D 9.5V

CR2032

A76/LR44

PRODUCTS THAT DO NOT INCLUDE BATTERIES:

Products that do NOT include but require AAA, AA, C, D, 9V batteries should declare that alkaline ("LR") type batteries are recommended.

Motorized products that do NOT include but require AAA, AA, C, D, batteries should declare that alkaline ("LR") type batteries

are required.

BATTERIES INCLUDED

BATTERIES REQUIRED

1.5VA AA R03 size

Alkaline batteries recommended. Phillips/cross head screwdriver (not included) needed to insert batteries.

NOT INCLUDED

BATTERIES REQUIRED

1.5VA AA/R03 size

Alkaline batteries recommended.Phillips/cross head screwdriver (not included) needed to insert batteries.

NOT INCLUDED

1.5VAA/R6 size

NOT INCLUDED

BATTERIES REQUIRED

1.5VA AA/R03 size

Alkaline batteries recommended. Phillips/cross head screwdriver (not included) needed to insert batteries.

NOT INCLUDED

BATTERIES REQUIRED

Alkaline batteries recommended. Phillips/cross head screwdriver (not included) needed to insert batteries.

NOT INCLUDED

BATTERIES INCLUDED

1.5VAA/R6 size

Replace with 2 x 1.5V “AA” or R6 size batteries. Alkaline batteries recommended. Phillips/cross head screwdriver (not included) needed to insert batteries.

BATTERIES

ALKALINE

REQUIRED

1.5VA AA LR03 size

Phillips/cross head screwdriver (not included) needed to insert batteries.

NOT INCLUDED

BATTERIES

ALKALINE

REQUIRED

NOT INCLUDED

BATTERIES INCLUDED

1.5VAA/R6 size

Replace with 2 x 1.5V “AA” or LR6 size alkaline batteries. Phillips/cross head screwdriver (not included) needed to replace batteries.

BATTERIES

ALKALINE

REQUIRED

1.5VA A/LR6 size

Phillips/cross head screwdriver (not included) needed to insert batteries.

NOT INCLUDED

Replace with 2 x 1.5V “A76” or LR44 button cell

A76/LR44 Alkaline

BATTERIES INCLUDED

1.5VA A/R6 size

Replace with 3 x 1.5V “AA” or R6 size batteries. Alkaline batteries recommended. Phillips/cross head screwdriver (not included) needed to replace batteries.

CAUTION:

1. Be sure to insert the batteries correctly and always follow the toy and battery manufacturers’ instructions.

Do not mix old batteries and new batteries or alkaline, standard

(carbon zinc) or rechargeable (nickel-cadmium) batteries.

3. Always remove weak or dead batteries from the product.

IMPORTANT: BATTERY INFORMATION

Please retain this information for future reference. Batteries should be replaced by an adult.

1. Always follow the instructions carefully. Use only batteries specified and be sure to insert item correctly by matching the + and – polarity markings.

2. Do not mix old batteries and new batteries or standard (carbon-zinc) with alkaline batteries.

3. Remove exhausted or dead batteries from the product.

4. Remove batteries if product is not to be played with for a long time.

5. Do not short-circuit the supply terminals.

6. Should this product cause, or be affected by, local electrical interference, move it away from other electrical equipment. Reset (switching off and back on again or removing and re-inserting batteries) if necessary.

RECHARGEABLE BATTERIES: Do not mix these with any other types of batteries. Always remove from the product

before recharging. Recharge batteries under adult supervision. DO NOT RECHARGE OTHER TYPES OF BATTERIES.

CAUTION:

To replace batteries: Using a Phillips/cross head screwdriver (not included), loosen screw in battery compartment door (screw remains attached to door). Remove door. Insert 3 x 1.5V “AA” or R6 size batteries. Alkaline batteries recommended. Replace door and tighten screw.

CANTINA BAND