Hasbro 69322 User Manual
Product and colors may vary.
Spider-Man and all related characters and the distinctive likeness thereof: TM & © 2007 Marvel Characters, Inc.
Spider-Man 3, the Movie: TM & © 2007 Columbia Pictures Industries, Inc. All rights reser ved.
www.marvel.com
®* and/or TM* and © 2007 Hasbro. All Rights Reserved.
TM & ® denote U.S. Trademarks.
AGES
3+
69322/69128 Asst.
P/N: 6679090000
Questions? Call: 1-800-327-8264
CAUTION:
1. Always follow the instructions carefully. Use only batteries specified and be sure
to insert item correctly by matching the + and – polarity markings.
2.
Do not mix old batteries and new batteries or standard (carbon-zinc) with alkaline batteries.
3. Remove exhausted or dead batteries from the product.
4. Remove batteries if product is not to be played with for a long time.
5. Do not short circuit the supply terminals.
6. Should this product cause, or be affected by, local electrical interference, move
it away from other electrical equipment. Reset (switching off and back on again or
removing and re-inserting batteries) if necessary.
7. RECHARGEABLE BATTERIES: Do not mix these with any other types of battery.
Always remove from the product before recharging. Recharge batteries under adult
supervision. DO NOT RECHARGE OTHER TYPES OF BATTERIES.
CAUTION: TO AVOID BATTERY LEAKAGE
1. Be sure to insert the batteries correctly and always follow the toy and
battery manufacturers’ instructions;
2. Do not mix old and new batteries or alkaline, standard (carbon-zinc)
or rechargeable (nickel-cadmium) batteries;
3. Always remove weak or dead batteries from the product.
IMPORTANT: BATTERY INFORMATION
Please retain this information for future reference. Batteries should be replaced by an adult.
Bump & Go
SPIDER-MAN 4 Wheeler
Not suitable for children
under 3 years because of
small parts — choking hazard.
®
*
To install batteries:
1. Using a Phillips/cross head
screwdriver (not included),
unscrew battery cover.
2. Insert 2 fresh 1.5 V “AA”
or LR6 batteries. See diagram
for polarity.
3. Replace battery cover and
tighten screw.
CR2032
A76/LR44
PRODUCTS THAT DO NOT INCLUDE BATTERIES:
Products that do NOT include but require AAA, AA, C, D, 9V
batteries should declare that alkaline ("LR") type batteries
are recommended.
Motorized products that do NOT include but require AAA, AA, C,
D, batteries should declare that alkaline ("LR") type batteries
are required.
PRODUCTS THAT INCLUDE BATTERIES:
Products that include AAA, AA, C, D, 9V batteries should declare
that batteries are included and recommend replacement with
alkaline batteries.
Motorized products that include AAA, AA, C, D, 9V batteries should
declare that batteries are included and replacement with alkaline
batteries is required.
BATTERIES
REQUIRED
x3
1.5VA AA
R03 size
Alkaline batteries
recommended.
Phillips/cross head
screwdriver (not included)
needed to insert batteries.
NOT INCLUDED
x3
BATTERIES REQUIRED
1.5VA AA/R03 size
Alkaline batteries recommended.Phillips/cross
head screwdriver (not included) needed to
insert batteries.
NOT INCLUDED
BATTERIES REQUIRED
x3
1.5VA AA/R03 size
Alkaline batteries recommended. Phillips/cross head
screwdriver (not included) needed to insert batteries.
NOT INCLUDED
BATTERIES
REQUIRED
x3
1.5VA AA
R03 size
Alkaline batteries
recommended.
Phillips/cross head
screwdriver
(not included)
needed to insert
batteries.
NOT INCLUDED
BATTERIES
INCLUDED
x3
1.5VA AA/R03 size
Replace with 3 x 1.5V “AAA”
or R03 size batteries.
Alkaline batteries recommended.
Phillips/cross head screwdriver
(not included) needed to
insert batteries.
x3
BATTERIES INCLUDED
1.5VA AA/R03 size
Replace with 3 x 1.5V “AAA” or R03 size batteries.
Alkaline batteries recommended. Phillips/cross head
screwdriver (not included) needed to replace batteries.
x2
BATTERIES INCLUDED
1.5VAA/R6 size
Replace with 2 x 1.5V “AA” or R6 size batteries.
Alkaline batteries recommended. Phillips/cross head
screwdriver (not included) needed to insert batteries.
BATTERIES INCLUDED
x3
1.5VA AA/R03 size
Replace with 3 x 1.5V “AAA” or R03 size batteries.
Alkaline batteries recommended. Phillips/cross head
screwdriver (not included) needed to insert batteries.
BATTERIES
INCLUDED
x3
1.5VA AA
R03 size
Replace with 3 x
1.5V “AAA” or R03
size batteries.
Alkaline batteries
recommended.
Phillips/cross head
screwdriver
(not included) needed
to insert batteries.
1.5VA AA
x2
BATTERIES
ALKALINE
REQUIRED
1.5VA A/LR6 size
Phillips/cross head screwdriver (not included)
needed to insert batteries.
NOT INCLUDED
Loading...