Product and colors may vary.
© 2007 Lucasfilm Ltd. & ® or TM where indicated. All rights reserved.
®* and/or ™* & © 2007 Hasbro. All Rights Reserved.
™ & ® denote U.S. Trademarks.
P/N 6779630000
*
x3
BATTERIES INCLUDED
1.5VA A/R6 size
Replace with 3 x 1.5V “AA” or R6 size
batteries. Alkaline batteries recommended.
Phillips/cross head screwdriver (not included)
needed to replace batteries.
x3
BATTERIES INCLUDED
1.5VA A/R6 size
Replace with 3 x 1.5V “AA” or R6 size
batteries. Alkaline batteries recommended.
Phillips/cross head screwdriver (not included)
needed to replace batteries.
AGES 5
+
87627/87628 Asst.
IMPORTANT! PLEASE READ INSTRUCTIONS
COMPLETELY BEFORE WEARING TOY.
ASSEMBLY & STRAP ADJUSTMENT
Attach straps to helmet
front: Insert tabs into holes
on inside of helmet and slide
up towards top of helmet.
Make sure all four mounting
points are secure.
Attach upper and lower
halves of helmet back.
Attach crest to
helmet back.
Attach helmet back
to helmet front.
1
3 4
2
Adjust straps to fit child’s head. Straps can be
readjusted once they are attached to helmet.
To adjust, lift straps off posts, slide straps to
desired position, and press straps onto posts.
1
Place helmet straight down on
head. Make sure the straps are
adjusted to keep it steady on
the child’s head so your child
can see through the eyes.
WEARING HELMET
BUTTONS
When helmet is not in use, slide switch
to “Off” to help conserve battery life.
Power
Radio Static Button/Voice Amplifier
Clone Trooper Phrases Button
Clone Trooper Commands Button
The helmet comes packaged in a “try me”
mode. Move switch from “Try Me” position to
“On” position for full activation of features.
2
5