No
batteries
required. For indoor use
only.
Class
1
LED
product.
Some
assembly
required.
Adjustable
wrench
and
screwdriver
required
(not included).
1
AGES
6-k
+
b, or play on base or poles. When adjusti eep hands and
both bases are filled full with fingers away g parts.
re
each use. Fill bases with
elean
Surface bene
-mwt
be smooth and
tap
wabf
only. free of objects
that
cgPW
cause punctures.
1
PRIOR
Tb
ASSEMBLY
rT
.T1
0
Ball
2TanksWh
Caps
(Left
and
Right)
Top Holder
n
Pin
2
Top Posts
I
Control
unit (Top
Posts are
part of the
same
assembly)
Control
Unit
Assembly is easier with two people.This is a large product and somepatE are heavy.
Assemble the system where you want
it
to stay: do not assemble the entire product
and attempt to move
it
across a room or from one room to another. For instructions
on disassembly, see p.
9.
Assembling the Backboard and Rim first will make overall assembly easier.When the
rest of the product
is
assembled, you can attach this completed part to the top.
FIUING
7HE
TANKS
TwoTanks anchor the system in place. Fill theTanks with water: do not
fill
with sand,
gravel, or any other material or liquid.
The Tanks do not have a
fill
line:
fill
until full. Each Tank holds approximately five
gallons of water and, when full, weighs approximately
42
pounds.
It
is recommended
that
you
fill
the Tanks
near
where
you
want
the
system
to
be,
so
you
do
not
haw
to
cany
thr
Tank
far.
Fill
the
Tank
ebiw
bC
'
ma
fiHng
or
Bringing a pitcher or
water container to the
Tanks and filling.
Whichever approach you
take, be sure the Tank is flat when being filled and that the Tank Cap is secure before
you move
theTank.
Each Tank has a handle at one end and a grip at the other end. If you do not have a
second person to help lift and carry the Tanks,
be
careful: the Tanks are heavy.
Front
view
ASSEMBLE
!-OARD/Rlkr
Rim
Place the
6ackt-d
on
top of the post/control
unit assembly.
Attach the two Hinge
Blocks to the Rim.
------
Place and
secure the Rim
Assembly into
the Backboard.
Secure with
four
(4)
metal
hex
bolts.At the
other end of
each hex bolt,
secure with
a
washer and nut.
cde and proceed
with
assembly.
I
Loading...