Harwin M80-880 User Manual
DATAMATE CABLE HOOD M80-880XX98
No.1 Contact
Marker
Lid
Cable Clamp
No.1
Contact
Main Body
ASSEMBLY INSTRUCTIONS
1. Position connector into nest of main body. Ensure No.1 contact is orientated as shown so as
to match No.1 contact marker on lid.
2. Trace wires of cable assembly through cable clamp channel.
3. Position cable clamp over wires and secure in position with 2-off self-tapping screws. DO NOT
OVER-TIGHTEN.
4. Place lid over complete assembly and secure in place with 2-off self-tapping screws. DO NOT
OVER-TIGHTEN.
Harwin North America Harwin Europe Harwin Asia
T: +1 603 893 5376 F: +1 603 893 5396 T: +44 (0) 23 9231 4545 F: +44 (0) 23 9231 4590 T: +65 6 779 4909 F: +65 6 779 3868
E: misboston@harwin.com W: www.harwin.com E: mis@harwin.co.uk W: www.harwin.com E: mis@harwin.com.sg W: www.harwin.com.sg
IS-08 Issue: 2 Date: 03.10.07 C/Note: 9874 Page 1 of 1
Loading...