HARVEY T-40 User Manual
USERS MANUAL
Turbo
WOOD LATHE
Model: T-40
www.harveymachinery.com
Table of Contents
GENERAL SAFETY RULES ................................................................................ 1
Wood Lathe Introductions .............................................................................. 2
Features .......................................................................................................... 2
Product Components ...................................................................................... 3
Wood Lathe Specifications ............................................................................. 4
Accessories ...................................................................................................... 5
Power Supply .................................................................................................. 6
Assembling and Adjustment ........................................................................... 6
Base ........................................................................................................... 6
Unpacking ................................................................................................... 6
Packing List ................................................................................................. 7
Operating ........................................................................................................ 8
Control Panel ............................................................................................... 8
Speed Range Adjustment .............................................................................. 9
Recommended Turning Speed Table .............................................................. 9
Tool Slide .................................................................................................. 10
Tool Rest ................................................................................................... 10
Head Stock ................................................................................................ 10
Tail Stock .................................................................................................. 11
Using Tail Stock Quill .................................................................................. 11
Using the Spur Center ................................................................................ 11
Using the Face Plate ................................................................................... 11
Using the Live Center ................................................................................. 11
General Maintenance .................................................................................... 12
Parts List and Exploded View ....................................................................... 13
Exploded View ............................................................................................... 18
T-40
Turbo
Wood Lathe
|
1
GENERAL SAFETY RULES
Please operate the lathe with awareness of the potential for injury. If you have any doubts
about safety, we ask you to contact your local dealer before using.
Warning! Failure to follow the listed rules may result in serious personal injury.
To ensure safe use, READ This MANUAL BEFORE OPERATING THE TOOL.
ALWAYS USE A FULL FACE SHIELD. A full face shield will protect the eyes and face.
KEEP WORK AREA CLEAN and having good lighting.
WEAR PROPER APPAREL. Do not wear loose fitting clothing, gloves, neckties, rings,
bracelets or other jewelry, which may get caught in moving parts. Non-slip footwear is also
recommended. Wear long hair pulled back.
DISCONNECT MACHINE from the electrical supply before servicing and when changing
accessories
NEVER LEAVE MACHINE RUNNING UNATTENDED. Do not leave the lathe unless it is
turned “Off” and has come to a complete stop.
USE THE RIGHT TOOL. Do not use a tool or attachment to do a job for which it was not
intended or designed.
TIGHTEN ALL CLAMP HANDLES on the headstock, tailstock, and the tool rest before
operating the lathe.
Before turning a large wood piece, it is advisable to reduce the excess before mounting the
stock to the lathe. When turning a large wood piece, the turner should not stand close to
the lathe to avoid being struck by a wood piece ejected by an imbalance.
Hold the tool handle firmly to avoid the rebound
2
|
T-40
Turbo
Wood Lathe
Wood Lathe Introductions
Tools express thoughts, and serve as the extension of your hands. An ideal tool should
perform readily as a connection between hand and mind; additionally, it ought to be
pleasurable, enlightening, and beautiful.
The Harvey team never stops pursuing excellence to enhance a user’s optimal working
experience. After developing the Harvey Turbo T-50/60 heavy duty woodworking lathes, the
Harvey team then spent over two years working to develop a smaller lathe ideally sized to suit
the demands of serious hobbyists and home workshops. Now we are glad to announce that
our efforts have been achieved: the Turbo T-40 Lathe is the result.
In order to overcome long known issues of insufficient torque and “speed loss” on most small
lathes on the market, for the first time in the industry, Harvey Industries has introduced the
Industrial Servo Motor (ISM) system and integrated it in with the T-40 spindle drive.
The exterior and machined surfaces are engineered and crafted with our highest standards to
enhance a user’s experience. The Turbo T-40 lathe is crafted with premium grade cast iron
and machined to the highest tolerances. The guideways are precision ground for smooth
operation. The surface of the T-40 lathe is coated with a high gloss, stove enamel.
T-40 has features a 360mm (14”) maximum swing, and a 625mm (24”) distance between
centers. The spindle head can rotate 90° for larger faceplate turning. In addition, 80KG (178
lb) of ballast makes the T-40 the heaviest lathe in its league. The Harvey engineering and
manufacturing teams sincerely hope the new Turbo T-40 will make a greatly enjoyable tool for
turners of all ages and skill levels.
Features
Industrial Servo Motor drive system with 300% overload capacity
Quick spindle stop
Forward/Reverse spindle rotation
Variable Speed, maximum 4300rpm
Swivel headstock to 0°-90°for faceplate turning
Rigid structure with premium cast iron
Precision machined and ground guide ways
Forged and ground alloy steel spindle with 3 oversized bearings
Cast steel tool rest with edge treated to guard against wear
Oversized solid tool slide for smooth operation
Built-in 24 position indexing spindle with quick adjusting mechanism
High gloss baked enamel surface treatment
T-40
Turbo
Wood Lathe
|
3
Product Components
Figure 1
A
Servo Motor
M
Tail Stock
B
Spindle Hand Wheel
N
Tail Stock Hand Wheel
C
Driver
O
Tail Stock Lock Handle
D
Control Buttons
P
Bed
E
Speed Display
Q
Tool Slide
F
Head Stock
R
Tool Rest Lock Handle
G
Spindle
S
Tool Slide Lock Handle
H
3″Face Plate
T
Tool Rest
I
Spur Center
U
Head Stock Lock Handle
J
Live Center
V
Pulley Cover
K
Tail Stock Quill
W
Motor Mount Handle
L
Tail Stock Quill Lock Handle
X
Motor Lock Handle
4
|
T-40
Turbo
Wood Lathe
Wood Lathe Specifications
Basic Specification
Maximum swing over bed 14”
Distance between centers 24”
Max. swing over tool slide 10”
Spindle Speeds: High Range 90-4300rpm
Low Range 60-2800rpm
Preset Head Stock Positions 0°- 22.5°- 45°- 90°
Spindle
Taper MT2#
Thread
1-1/4”×8（RH）TPI UNS
Through hole dia. 1/2”
Spindle Indexing 24 Position
Spindle Bearings
Front 2，Rear1
Tail Stock
Tail Quill Taper MT2#
Through hole diameter 3/8”
Tail Stock Travel 4-1/4”
Accessories
Tool Rest Width 12”
Face Plate Dia. 3″
Spur Center Taper MT2#
Dead Center Taper MT2#
Motor Data
Motor Servo Motor
Power 1HP
Power Supply
200-230VAC、Single Phase、50/60Hz
T-40
Turbo
Wood Lathe
|
5
Accessories
Standard Accessories
3″Face Plate 1piece
Spur Center 1piece
Spindle Position Bar 1piece
50# Spanner 1piece
Live Center 1piece
3mm Hex Key 1piece
Knockout Rod 1piece
Live Center Position Bar 1piece
19# One Head Spanner 1piece
Optional Accessories
Please visit Harvey official website for more information
www.harveymachinery.com
Loading...