Hartzell 46,46V,48,48V Spec Sheet

Download

Page 1

HARTZELL

Hartzell Fan, Inc., Piqua, Ohio 45356

www.hartzellfan.com

Bulletin A-118-V November 2004

Duct Axial®Fans

Series 46 Series 46V Series 48 Series 48V

Page 2

Bulletin A-118-V

www.hartzellfan.com

1 (800) 336-3267

This bulletin lists Hartzell’s complete line of Duct Axial®Fans and accessories. More than 70 Hartzell offices can provide specific performance and installation data to meet your requirements. Call your Hartzell representative for assistance. Visit our website (www.hartzellfan.com) or call toll-free (1-800-336-3267) for the name of your Hartzell representative.

Hartzell Model Code Explanation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 2

General Construction Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 3

Selection Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Pages 4-5

Fan Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 6

Optional Vane Section . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 7

Duct Axial®Fans

Cast Aluminum, Type DA Propeller

Series 48 Direct Drive Duct Axial®Fan

Construction and Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 8

Performance Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 9

Series 46 Belt Drive Duct Axial®Fan

Construction and Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 11

Performance Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Pages 12-15

Fabricated Steel, Type HS and CS Propellers

Series 46 Belt Drive Duct Axial®Fan, Type HS Propeller, Hi Temperature Fan Series 46 Belt Drive Duct Axial®Fan, Type CS Propeller, Stainless Steel Fan

Construction and Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 16

Performance Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Pages 17-20

Fiberglass Fans/Protective Coatings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 21

Options and Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Pages 22-23

Certified Ratings for Air Performance

Hartzell Fan, Inc. certifies that the Direct Drive Axial Fan, Series 48 and Series 48V Direct Drive Duct Vaneaxial Fan, on pages 8 and 9; and Belt Drive Duct Axial Fan, Series 46, and 46V Belt Drive Duct Vaneaxial Fan, on pages 11 through 15, are licensed to bear the AMCA Seal. The ratings shown are based on tests and procedures performed in accordance with AMCA Publication 211 and comply with the requirements of the AMCA Certified Ratings Program.

Index

Motor Horsepower

Horsepower

/41/31/23/4 111/2 23571/2 10 15 20 25 30 40 50 60

Code Letter D E F G H I J K L M N O P Q R S T U

How To Use Model Code Index:

Example:

Assume a needed performance of 11,000 CFM at 3/4" SP, standard air. Reading the rating table on page 9, we find a 36" fan capable of 11,388 CFM, with RPM of 870 and brake horsepower (BHP) of 2.06. Required motor horsepower is 3.

The model code can be constructed as follows: Type will be a production item (code A), product series for the Duct Axial

Fan

is 48, size of the wheel is 36", number of blades on the fan is 6, blade code for this item is DA, material for construction is steel (code ST), motor enclosure is air over (AO), motor horsepower is 3 (code K), and motor RPM/phase is 870 (code 5).

Note: All other information fields must be filled with hyphens (/) dashes (-) if they are not applicable to the fan being considered.

A 48– – –36 6 DA ––– S T AO K 5

Type

A – Production Item S – Stock Item

Q – Special Quote Product Series Arrangement (centrifugals only) Size (nominal wheel diameter, inches) Class/Blades (class for centrifugals; blades for axial) Wheel Code Wheel Width/ Blade Angle (width (%) centrifugals /angle axials) Material of Construction Motor Enclosure Motor Horsepower Motor RPM/Phase

Motor RPM/Phase

3 Phase 1 Phase

2 = 3450 B = 3450 3 = 1750 C = 1750 4 = 1140 D = 1140 5 = 870 E = 870 6 = 690 F = 690 7 = 575 G = 575

Hartzell Model Code Explanation

Page 3

Bulletin A-118-V

www.hartzellfan.com

1 (800) 336-3267

General Construction Features

• Applications–Hartzell Duct Axial®fans are ideal for applica-

tions where static pressure requirements fall between those of a low-pressure duct fan and a vaneaxial blower. Duct Axial

fans, Type DA, combine the best features of the rugged, highly efficient vaneaxial blower and the economical performance of the duct fan providing maximum efficiency in the static pressure range from 1" to 4", at low speeds, and with low noise characteristics. The six-blade, one-piece airfoil propeller is designed to move large volumes of air at medium static pressures.

These efficient fans can be used to remove fumes, steam, hot air, and smoke; or to supply air for cooling, drying, general ventilation or in make-up air applications.

• Performance

–

Ranges from 1204 CFM at free air to 45,100

CFM at 3" static pressure. Maximum static pressure: 4".

• Standard Construction

–

Housings are hot rolled steel with

rolled steel flanges. Exterior dimensions of the Duct Axial

fans match those of Hartzell’s regular duct fans; both have identical inside and outside diameters, drum lengths and bolt circles. Duct Axial

fans are available in sizes 12" – 60".

These fans are supplied with an industrial grade enamel industrial coating, suitable for indoor or outdoor industrial structural application.

The Type DA propeller is a one-piece cast aluminum alloy airfoil. It is designed for a broad range of tip speeds and performs efficiently throughout; it operates from free air to full block off with no stall in the fan curve. The Type DA propeller is fully machined, and static and dynamically balanced individually. It is fitted with split taper bushings for easy installation and removal.

• Available Construction

–

The Hartzell medium pressure Duct

Axial

fans are also available with fabricated steel wheels. The type HS is a six-blade fabricated carbon steel counterpart of the cast aluminum DA. It is used primarily for high temperature applications. The CS fabricated six-blade propeller is constructed of 304 stainless steel and is applied primarily in corrosive applications. These fabricated versions of the Hartzell Duct Axial

fan are available in sizes 12" – 36".

Type DA Propeller

•

Six blade

•

Airfoil design

•

Cast aluminum alloy 319 construction

•

Laminar performance and flow delivery from free air to full block off

•

Available in sizes 12" – 60"

•

Maximum temperature 350°F

•

Performance tables shown on pages 9 and 12–15

Type HS and CS Propellers

•

Six blade

•

Single camber airfoil design

•

Fabricated steel (Type HS) or stainless steel 304 (Type CS) construction

•

Laminar performance from free air to block off available in sizes 12" – 36"

•

Maximum temperature 500°F

•

Performance tables shown on pages 17–19

Duct Axial®Fan Direct Drive

Duct Axial®Fan Belt Drive

Page 4

Bulletin A-118-V

www.hartzellfan.com

1 (800) 336-3267

How To Use Capacity Tables

1. Select size, RPM and BHP for a given air delivery and pressure of a Duct Axial

fan from the rating tables, pages 9, 12–15, and

17–20. Performance ratings are based on standard air conditions, sea

level 70°F and 29.92 inches barometric pressure giving an air density of .075 lbs. per cubic foot. The specific gravity of air equals 1.00 at these conditions.

2. If non-standard temperature or altitude is involved, correct to standard air density (see Table 1).

3. For speeds above ratings consult factory.

Altitude – Temperature Correction

Temperatures above or below 70°F at sea level (0 ft.) are read vertically between the double lines giving the proper correction factors. Altitudes above sea level at a constant 70°F temperature are read horizontally between the double lines giving those factors. Any other factors are obtained by reading down to the desired temperature, then across to the desired altitude.

Selection Guide

Table 1 Combined Altitude – Temperature Correction Factors

0 1000 2000 3000 4000 5000 6000 7000 8000 9000 10000 11000 12000

-50 0.77 0.80 0.83 0.86 0.89 0.92 0.96 1.00 1.04 1.08 1.12 1.16 1.21

-25 0.82 0.85 0.89 0.92 0.95 0.98 1.03 1.07 1.11 1.15 1.20 1.24 1.29 0 0.87 0.90 0.94 0.97 1.01 1.04 1.09 1.13 1.17 1.22 1.27 .131 1.37

25 0.91 0.95 0.98 1.02 1.06 1.09 1.14 1.18 1.23 1.27 1.33 1.37 1.43 50 0.96 1.00 1.04 1.08 1.11 1.15 1.20 1.25 1.30 1.34 1.40 1.45 1.51

70 1.00 1.04 1.08 1.12 1.16 1.20 1.25 1.30 1.35 1.40 1.46 1.51 1.57

100 1.06 1.10 1.14 1.19 1.23 1.27 1.33 1.38 1.43 1.48 1.55 1.60 1.66 125 1.10 1.14 1.19 1.23 1.28 1.32 1.38 1.43 1.49 1.54 1.61 1.66 1.73 150 1.15 1.20 1.24 1.29 1.33 1.38 1.44 1.50 1.55 1.61 1.68 1.74 1.81 175 1.20 1.25 1.30 1.34 1.39 1.44 1.50 1.56 1.62 1.68 1.75 1.81 1.88 200 1.25 1.30 1.35 1.40 1.45 1.50 1.56 1.63 1.69 1.75 1.83 1.89 1.96 225 1.29 1.34 1.39 1.44 1.50 1.55 1.61 1.68 1.74 1.81 1.88 1.95 2.03 250 1.34 1.39 1.45 1.50 1.55 1.61 1.68 1.74 1.81 1.88 1.96 2.02 2.10 275 1.39 1.45 1.50 1.56 1.61 1.67 1.74 1.81 1.88 1.95 2.03 2.10 2.18 300 1.43 1.49 1.54 1.60 1.66 1.72 1.79 1.86 1.93 2.00 2.09 2.16 2.25 325 1.48 1.54 1.60 1.66 1.72 1.78 1.85 1.92 2.00 2.07 2.16 2.23 2.32 350 1.53 1.59 1.65 1.71 1.77 1.84 1.91 1.99 2.07 2.14 2.23 2.31 2.40

ALT.

°F. TEMP

Note: Table 1 has inverted values. Actual density ratio is the reciprocal of the above values.

EXAMPLE: Assume the required performance to be 16,500 CFM, .75" SP, 175°F, and 3000 ft. altitude.

1. Table 1 gives a factor of 1.34.

2. .75" SP x 1.34 = 1.00 SP for 70°F at sea level.

3. A 36" Series 48 Direct Drive Duct Axial

Fan selected from the Rating Table on page 9 for the new conditions shows 16,511 CFM, 1.00 SP at 1160 RPM with 4.36 BHP.

4. Correct the horsepower and pressure in Step 3 to nonstandard performance by dividing by the factors:

1.00" SP / 1.34 = .75" SP

4.36 BHP / 1.34 = 3.25 BHP

5. Final performance of the direct drive Duct Axial

fan at the

assumed conditions:

16,500 CFM, .75" SP, 1160 RPM,

3.25 BHP, 175°F, and 3000 ft. altitude.

Motor must be suitable for 175°F and 3000 ft. altitude also.

High Temperature Construction

Direct Drive Duct Axial®Fans – Series 48 and 48V

Temperature: 104°F standard.

104° to 140°F – Class F insulation required on motor. 140° to 176°F – Class H insulation required on motor. 176° to 212°F – Class HH insulation required on motor. For direct drive units with airstream temperatures above 212°F,

contact factory.

Belt Drive Duct Axial

Fans – Series 46 and 46V

with Type DA or CS

For applications with airstream temperatures between 200°F and 350°F, high temperature construction is required. High temperature construction consists of purging fan bearings with high temperature grease as well as opening the end of the bearing cover so that cool ambient air is drawn over the belts and bearings. Extended lubrication tube material is changed to copper tubing. If the motor ambient temperature is higher than 104°F, specially insulated motors are required.

For airstream temperatures above 350°F, use Type HS Propeller up to 500°F; above 500°F, contact factory.

Page 5

Bulletin A-118-V

www.hartzellfan.com

1 (800) 336-3267

Table 2 Additional Static Pressure Capability (Regain)

Inches W.G.

F.P.M. PRESSURE F.P.M. PRESSURE F.P.M. PRESSURE

VELOCITY INCHES VELOCITY INCHES VELOCITY INCHES

1000 0.012 2750 0.099 4500 0.261 1250 0.020 3000 0.117 4750 0.290 1500 0.029 3250 0.138 5000 0.323 1750 0.040 3500 0.160 5250 0.356 2000 0.052 3750 0.183 5500 0.392 2250 0.065 4000 0.207 5750 0.428 2500 0.081 4250 0.233 6000 0.467

Note: For an included cone angle of 25°-30°.

F.P.M. PRESSURE F.P.M. PRESSURE

VELOCITY INCHES VELOCITY INCHES

500 0.0156 2250 0.316 600 0.0225 2500 0.391 700 0.0305 2750 0.473 800 0.0400 3000 0.562

900 0.0504 3250 0.661 1000 0.0625 3500 0.768 1100 0.0758 3750 0.880 1200 0.0900 4000 1.000 1300 0.106 4250 1.130 1400 0.122 4500 1.265 1500 0.141 4750 1.410 1600 0.160 5000 1.560 1700 0.181 5250 1.720 1800 0.203 5500 1.890 1900 0.226 5750 2.060 2000 0.250 6000 2.250

FROM TO MULTIPLY BY

Inches (in.) Millimeter (mm) 25.400 Feet (ft.) Meter (m) 0.3048 Velocity (ft./min.) Meter/Second (m/s) 0.00508 Volume Flow (cfm) Cubic Meter/Second (m

/s) 0.00047195

Pressure (in. w.g.) Pascal (N/m

) 248.36

Density (lb./ft

) Kilogram/Cubic Meter (Kg/m3) 16.018 Power (hp) Watt (w) 745.70 Square Foot (ft

) Square Meter (m2) 0.09290

Square Inch (in

) Square Meter (m2) 0.0006451

Metric Conversion Table

Table 3

Corresponding Air Velocities for Various Pressures in inches of water (air weight: .07488 lbs. per cu.ft.)

Discharge Cones

Ratings shown in this bulletin are for Duct Axial®fans with inlet and outlet ducts of the same diameter as the fan. Discharge cones may be used on the duct fans to adapt to larger diameters (see Fig. A).The result is a static pressure regain.

Table 2 shows the amount of additional static pressure capability, which results from using the discharge cone. Add the amount of .45 (VP

–VP2) to the duct fan’s static pressure.

= SP1+ .45(VP1–VP2)

Thus, a Duct Axial®fan selected for 4000 FPM O.V. at 3/4" SP using a size 18"-21" cone, the static pressure capability would be raised from .750" to .957" static pressure. Regain calculations are approximate and are not part of the AMCA certified ratings.

Discharge cones may also be used to transform large ducts to the Duct Axial

fan inlet size (see Fig. B). Since these cones have gently tapered sides, the friction loss is negligible, about .08 x the difference in velocity pressures (see Table 3).

If the fan is to be used with ducts smaller in diameter than the unit (see Fig. C), the difference in velocity pressure across the cone must be added to the static pressure for which the Duct Axial

fan is used.

Figure A

Figure B

Figure C

FAN

FLOW

FAN

FLOW

FAN FLOW

Page 6

Bulletin A-118-V

www.hartzellfan.com

1 (800) 336-3267

Fan Installation

Hartzell’s DA fans can often be the most economical choice for pressures from 1" to 4". Duct Axial

fans are engineered and built to become an integral part of duct systems for general ventilation, removal of contaminated air or air supply. Special equipment is not needed for installation and the units can be used in any position from vertical to horizontal.

Horizontal, roof-mounted, belt drive Duct Axial

fan performs integral function in heat recovery system.

Belt drive Duct Axial

fan with stack cap mounted at the end of

duct system.

Belt drive Duct Axial

fan installed vertically in duct system,

exhausting process heat to the outside.

Page 7

Bulletin A-118-V

www.hartzellfan.com

1 (800) 336-3267

Vane Section

Comparison of 36" Type DA without vanes and with vanes. Belt Driven Fans. Constant speed.

Example:

Given a desired performance of 10,500 CFM at 1.5" static pressure, a Duct Axial

fan without the vane section will meet the desired performance running at 1122 RPM and requiring 5.24 brake horsepower. By adding the vane section, the performance of 10,500 CFM can be achieved by running the unit at 1027 RPM, consuming only 4.0 BHP. A 30% energy savings is realized by merely adding the vane section, as well as a 10% reduction in the noise level of the fan.

The addition of a specially designed vane section to the Duct Axial

fan changes the design configuration to a vaneaxial. The addition of the vane section to the discharge side of any Duct Axial

fan – direct drive or belt drive – makes it perform efficiently as a low-powered vaneaxial on the upper side of its pressure curve. Near free air the guide vanes offer no advantage, but beyond the mid-range, the vanes provide about 30% more static pressure with the same horsepower.

Static Pressure Inches W.G.

BHP

0 3000 6000 9000 12000 15000 18000

CFM

System

BHP

Page 8

Bulletin A-118-V

www.hartzellfan.com

1 (800) 336-3267

12 127/8 155/8 145/8 11/4 12 GA .190 22 12 GA .125 6

/16 628 56

16 167/8 195/8 185/8 11/4 12 GA .190 25 12 GA .125 105/16 x 5/8 6 35 182T 18 187/8 215/8 205/8 11/4 12 GA .190 25 12 GA .125 115/16 x 5/8 6 36 182T 24 247/8 291/8 267/8 2 10 GA .250 31 10 GA .190 137/16 x 3/4 6 44 182T 28 287/8 331/8 307/8 2 10 GA .250 31 10 GA .190 137/16 x 3/4 6 44 184T 32 33 371/4 35 2 10 GA .250 34 10 GA .190 157/16 x 3/4 6 49 215T 36 37 413/8 39 2 10 GA .250 34 10 GA .190 167/16 x 3/4 6 50 254T 44 45 493/8 471/2 2 10 GA .250 42 10 GA .190 197/16 x 3/4 12 61 256T 48 491/8 531/2 515/8 2 10 GA .375 42 10 GA .190 227/16 x 3/4 12 64 284T 54 553/8 603/4 575/8 21/2 .375 .375 42 7 GA .25 237/16 x 3/4 12 65 365T 60 613/8 663/4 635/8 21/2 .375 .375 42 7 GA .25 257/16 x 3/4 12 67 405T

FAN

SIZE A

MAX.

MAX E

STL. ALUM. F

MAX G

STL. ALUM. H J K L

MAX. MOTOR FRAME

NOTES: Dimensions and specifications are subject to change. Certified prints are available.

• Applications: Handling relatively clean and corrosive-free air at temperatures not

exceeding the motor rating.

• Available in sizes 12" to 60"...performance from 1204 CFM at free air to 45,100

CFM at 3" SP.

• Propellers: 6 blade airfoil design, cast aluminum with taperlock bushing.

Type DA.

• Hot-rolled steel housing standard, material code ST. Also available in aluminum,

material code AL. Sizes 12" – 60".

• Rigid Motor Mounts – provide support for foot-mounted motors. Designed for

minimum resistance to airflow.

• Extended Lube Tubes from motor to exterior of fan housing are standard.

Extended motor leads to exterior of housing are available as an option.

• Accessories (see pages 22 and 23)

• Protective coatings (see page 21)

• Maximum temperature same as motor (see page 4)

• Vane Section (see page 7) can be used with Direct Drive units. For performance

characteristics refer to Series 48V style in rating table.

Principal Dimensions – Series 48, 48V

Direct Drive Duct Axial®Fan

Series 48 (Shown)

Series 48V (With Vanes)

Hartzell Fan, Inc. certifies that the Series 48 Direct Drive Axial

Fan and Series 48V Direct Drive Duct Vaneaxial Fan shown hereon are licensed to bear the AMCA Seal. The ratings shown are based on tests and procedures performed in accordance with AMCA Publication 211 and comply with the requirements of the AMCA Certified Ratings Program.

SOLID CAST

ALUMINUM PROPELLER

Page 9

Bulletin A-118-V

www.hartzellfan.com

1 (800) 336-3267

Motor

Cubic Feet Per Minute vs. Static Pressure

Size Model

0''

⁄2''

⁄4'' 1'' 11⁄2'' 2'' 21⁄2'' 3'' 31⁄2'' 4'' 41⁄2''

HP RPM CFM BHP CFM BHP CFM BHP CFM BHP CFM BHP CFM BHP CFM BHP CFM BHP CFM BHP CFM BHP CFM BHP

A48---126DA---ST___3 _

1725

1154 0.04 223 0.10 34 0.12

A48V--126DA---ST___3 _ 1157 0.04 337 0.09 96 0.13 A48--126DA---ST___2 _

3450

2308 0.35 2035 0.46 1891 0.52 1716 0.57 797 0.64 446 0.78 242 0.90 67 1.00 A48V--126DA---ST___2 _ 2313 0.33 2058 0.44 1926 0.47 1763 0.52 1388 0.61 673 0.72 398 0.89 192 1.04 A48---166DA---ST___3 _

1760

2932 0.24 2381 0.37 1616 0.41 1142 0.50 601 0.68 112 0.81

A48V---166DA---ST___3 _ 2934 0.24 2463 0.39 2148 0.46 1299 0.51 719 0.69 257 0.84 A48---166DA---ST___2 _

3450

5747 1.78 5516 2.00 5390 2.12 5256 2.26 4956 2.57 4608 2.82 4108 3.00 2951 3.12 2475 3.48 2137 3.90 1843 4.37 A48V---166DA---ST___2 _ 5751 1.79 5527 2.10 5411 2.25 5292 2.40 5047 2.70 4785 3.00 4487 3.28 4111 3.53 2861 3.58 2430 3.97 2104 4.32 A48---186DA---ST___4 _

1160

2703 0.09 876 0.21 445 0.27

A48V---186DA---ST___4 _ 2665 0.10 1212 0.19 596 0.26 202 0.33 A48---186DA---ST___3 _

1760

4101 0.33 3448 0.52 2887 0.59 1614 0.65 909 0.84 398 1.04 A48V---186DA---ST___3 _ 4043 0.34 3487 0.50 3088 0.57 2257 0.61 1210 0.82 613 1.04 A48---246DA---ST___5 _

860

4459 0.14 1438 0.35 647 0.46

A48V---246DA---ST___5 _ 4427 0.14 1954 0.31 847 0.44 A48---246DA---ST___4 _

1160

6015 0.34 4666 0.66 2468 0.79 1702 0.92 589 1.19 A48V---246DA---ST___4 _ 5972 0.33 4753 0.62 3849 0.72 2265 0.83 829 1.17 A48---286DA---ST___5 _

860

7155 0.34 3852 0.61 2439 0.78 1392 0.96

A48V---286DA---ST___5 _ 7052 0.32 5188 0.60 2929 0.71 1823 0.92 267 1.26 A48---286DA---ST___4 _

1160

9650 0.84 8193 1.24 7146 1.46 4588 1.56 2774 2.05 1465 2.58 504 2.96 A48V---286DA---ST___4 _ 9512 0.77 8290 1.24 7569 1.39 6608 1.53 3384 1.90 2034 2.45 914 2.96 A48---326DA---ST___5 _

860

10663 0.60 8184 1.13 4686 1.31 3445 1.60 1265 2.20

A48V---326DA---ST___5 _ 10557 0.60 8489 1.07 7036 1.25 3896 1.46 1668 2.12 A48---326DA---ST___4 _

1160

14382 1.48 12671 2.27 11765 2.60 10545 2.84 5776 3.42 4043 4.21 2298 5.02 973 5.67 A48V---326DA---ST___4 _ 14240 1.47 12775 2.14 12004 2.46 11113 2.70 8367 3.14 4420 3.95 2859 4.76 1550 5.62 A48---366DA---ST___5 _

870

15041 1.06 12492 1.84 10261 2.10 6428 2.36 3484 3.10 1517 3.90

A48V---366DA---ST___5 _ 14942 1.06 12694 1.76 11388 2.06 9599 2.28 4398 2.96 2020 3.80 605 4.61 A48---366DA---ST___4 _

1160

20055 2.51 18346 3.54 17299 4.10 16109 4.55 10745 5.13 7495 6.02 5268 7.02 3539 8.04 2156 9.13 928 10.10 A48V---366DA---ST___4 _ 19922 2.52 18353 3.53 17451 3.95 16511 4.36 14400 5.10 10223 5.48 6559 6.58 4740 7.77 2881 8.88 1557 9.83 A48---446DA---ST___7 _

575

17969 0.92 12175 1.67 7247 2.05 4839 2.51 1177 3.44 A48V---446DA---ST___7 _ 17981 0.90 13543 1.65 8868 1.87 5459 2.32 1742 3.36 A48---446DA---ST___6 _

690

21562 1.60 17748 2.68 13626 2.90 9370 3.36 5412 4.49 2333 5.69

A48V---446DA---ST___6 _ 21578 1.56 18277 2.63 15935 2.89 12361 3.17 6074 4.16 2947 5.48 A48---446DA---ST___5 _

870

27187 3.20 24494 4.66 22727 5.28 20574 5.67 12440 6.48 9053 7.86 6240 9.38 3776 10.97 1476 12.05 A48V---446DA---ST___5 _ 27206 3.13 24757 4.48 23329 5.19 21627 5.56 17025 6.29 10316 7.14 6980 8.73 4503 10.45 2351 11.76 A48---446DA---ST___4 _

1170

36562 7.79 34706 9.78 33651 10.74 32475 11.68 29720 13.20 25857 14.02 18110 14.96 15263 16.89 12759 18.70 10408 20.53 8472 22.72 A48V---446DA---ST___4 _ 36588 7.62 34837 9.33 33899 10.26 32908 11.27 30691 12.98 27978 13.78 24658 14.84 19340 15.59 14591 16.91 11795 18.91 9477 21.13 A48---486DA---ST___6 _

690

27877 2.45 23920 3.91 21049 4.34 14378 4.63 9219 6.03 5482 7.63 2223 9.01 A48V---486DA---ST___6 _ 27896 2.40 24413 3.81 22139 4.26 19234 4.62 10501 5.48 6163 7.14 3074 8.75

A48---486DA---ST___5 _

850

34341 4.58 31402 6.43 29539 7.27 27348 7.89 18002 8.60 13449 10.37 9810 12.06 6949 14.12 4239 16.03 1682 17.31 A48V---486DA---ST___5 _ 34365 4.48 31664 6.15 30131 7.09 28374 7.76 23881 8.59 16039 9.38 11119 11.10 7795 13.20 5185 15.36 2799 16.92 A48---486DA---ST___4 _

1140

46057 11.05 44000 13.57 42856 14.79 41594 15.99 38681 18.13 35158 19.48 27498 20.13 21411 22.09 18567 24.55 15755 26.79 13142 29.10 A48V---486DA---ST___4 _ 46090 10.81 44142 12.95 43107 14.09 42025 15.35 39666 17.81 36869 19.14 33533 20.19 29448 21.59 22712 22.36 17985 24.27 14896 26.80 A48---546DA---ST___6 _

695

39774 4.47 35613 6.60 32851 7.47 29406 7.98 17480 9.34 12361 11.33 8278 13.65 4566 15.83 1041 17.19 A48V---546DA---ST___6 _ 39803 4.38 36035 6.35 33806 7.35 31119 7.84 23289 8.86 14044 10.36 9268 12.75 5681 15.21 2353 16.86

A48---546DA---ST___5 _

870

49790 8.78 46683 11.47 44845 12.77 42747 13.98 37641 15.54 25773 16.55 20646 19.12 16529 21.57 12937 24.25 9855 27.28 6860 30.12 A48V---546DA---ST___5 _ 49825 8.59 46916 10.93 45330 12.28 43622 13.63 39577 15.26 34414 16.52 25979 17.60 18832 19.59 14553 22.44 11073 25.52 8194 28.69 A48---546DA---ST___4 _

1160

66386 20.81 64151 24.44 62945 26.22 61662 27.98 58789 31.38 55467 34.33 51638 36.34 45914 37.54 35141 38.91 30321 42.17 27190 45.72 A48V---546DA---ST___4 _ 66433 20.36 64304 23.42 63190 25.01 62037 26.67 59608 30.32 56942 33.75 53886 35.71 50378 37.00 46372 38.93 41459 40.89 33783 41.87 A48---606DA---ST___6 _

690

53946 7.37 49451 10.27 46619 11.61 43300 12.61 29275 13.67 21648 16.41 15995 19.04 11516 22.24 7310 25.36 3381 27.51

A48V---606DA---ST___6 _ 53984 7.21 49844 9.82 47506 11.30 44843 12.40 38077 13.70 26367 14.92 18153 17.49 12881 20.75 8763 24.17 5089 26.82 A48---606DA---ST___5 _

870

68018 14.76 64635 18.47 62718 20.26 60586 22.01 55603 24.89 49007 26.50 34501 28.06 28912 31.60 24354 35.03 19960 38.35 16344 42.36 A48V---606DA---ST___5 _ 68066 14.44 64873 17.62 63163 19.35 61362 21.22 57348 24.49 52462 26.02 46515 27.94 37330 29.43 27929 31.61 22647 35.26 18306 39.33

Series 48(V) A48---_ _6DA---ST_ _ _ _ and A48V--__6DA---ST_ _ _ _

Performance shown is for installation Type D: ducted inlet/ducted outlet. Performance ratings do not include the effects of appurtenances in the airstream. Series 48 denotes standard configuration. Series 48V denotes addition of guide vane section.

Bold-type information provided in the Rating Table above is needed when preparing a model code. See page 2 for the complete Hartzell Model Code Explanation and example.

Page 10

Bulletin A-118-V

www.hartzellfan.com

1 (800) 336-3267

This page is reserved for future use.

Page 11

Bulletin A-118-V

www.hartzellfan.com

1 (800) 336-3267

Belt Drive Duct Axial®Fan

Series 46 (Shown)

Series 46V (with Vanes)

• Hartzell Fan Heavy Duty Construction – Designed for industrial use for long

reliable service. Available in sizes 12" to 60" performance from 600 to 70,000 CFM, and static pressure capability up to 4" W.G. See pages 12 through 15.

• Applications – Where it is advantageous to have the motor out of the airstream or the

versatility of a belt drive configuration.Maximum temperature 200°F with standard construction. For temperatures to 350°F, see page 4 “High Temperature Construction.”

• Propellers – Type DA, six-blade, airfoil design, cast aluminum construction

mounted with split taperlock bushing and safety retainer plate for easy installation and removal. Moves large volumes of air at moderate pressures.

• Housing – One-piece, heavy gauge hot rolled steel housing, material code ST, with

continuously welded steel drum and flanges. Also available with aluminum housing, material code AL.

• Motor Out of the Airstream – Exterior mounting on fully adjustable platform style

motor base supported by external housing assembly base weldment. Open-end motors are standard. Motors larger than 30HP will be shipped separately for mounting on unit at job site. Motor frame size limits are identified in the dimension table.

• Bearings are heavy duty ball or roller type, in cast iron pillow block housings, selected

for minimum L-50 Life of 400,000 hours for horizontal fans; and 250,000 hours for vertical fans, and include extended lubrication fittings as standard. Shafts are turned ground and polished 1045 steel sized to operate well below critical speed.

• Drives – Drive sheaves are cast iron and belts are “V” type, heat, oil, and static

resistant and sized for continuous service with high service factor. Variable pitch drive sheaves are standard on fans up to and including 10 HP, through 48" size.

• Bearings, Shaft and Drive Protection – Drive components are enclosed in an inner

drum and protected from the airstream. This casing is positioned on the negative air pressure side of the propeller.Access to the shaft and bearings is through a removable bearing cover. Shaft seal and cover plate are an available accessory, see page 22.

• Vane section – Series 46V Vane section improves performance at many operating

points. See page 7 for description and refer to Series 46V in rating tables for performance characteristics.

• Accessories and Protective Coatings – See pages 21 – 23.

Hartzell Fan, Inc. certifies that the Series 46 Belt Drive Duct Axial

Fan and Series 46V Belt Drive Duct Vaneaxial Fan, shown hereon are licensed to bear the AMCA Seal. The ratings shown are based on

tests and

procedures performed in

accordance with AMCA Publication 211 and comply with the requirements of the AMCA Certified Ratings Program.

12 127/8 155/8 145/8 11/4 12 GA .190 22 12 GA

/8 6

/16 628245/8 145T

16 167/8 195/8 185/8 11/4 12 GA .190 25 12 GA

/8 105/16 x 5/8 635301/8 182T

18 187/8 215/8 205/8 11/4 12 GA .190 25 12 GA

/8 115/16 x 5/8 636311/8 213T

24 247/8 291/8 267/8 2 10 GA .250 31 10 GA .190 137/16 x 3/4 644397/8 215T 28 287/8 331/8 307/8 2 10 GA .250 31 10 GA .190 137/16 x 3/4 644417/8 254T 32 33 371/4 35 2 10 GA .250 34 10 GA .190 157/16 x 3/4 649451/4 254T 36 37 413/8 39 2 10 GA .250 34 10 GA .190 167/16 x 3/4 650471/4 256T 44 45 493/8 471/2 2 10 GA .250 42 10 GA .190 197/16 x 3/4 12 61 583/4 286T 48 491/8 531/2 515/8 2 10 GA .375 42 10 GA .190 227/16 x 3/4 12 64 603/4 324T 54 553/8 603/4 575/8 21/2 .375 .375 42 7 GA .25 237/16 x 3/4 12 65 513/4 326T 60 613/8 663/4 635/8 21/2 .375 .375 42 7 GA .25 257/16 x 3/4 12 67 543/4 364T

FAN SIZE A

MAX.

MAX E

STL. ALUM. F

MAX G

STL. ALUM. H J K L M

MAX.

MOTOR

FRAME

NOTES: Dimensions and specifications are subject to change. Certified prints are available. Selected configurations of shaded sizes are available as stocked models in Hartzell’s HRS Program.

Principal Dimensions — Series 46, 46V

SOLID CAST

ALUMINUM PROPELLER

Stock Models

Available in Hartzell’s

HRS Program.

Page 12

Bulletin A-118-V

www.hartzellfan.com

1 (800) 336-3267

Outlet

Static Pressure

Series CFM Velocity 0"

⁄2'' 1'' 11⁄2'' 2'' 21⁄2'' 3'' 4''

FPM

RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP

600 664

959 0.03 2029 0.31 2587 0.67 2989 1.07 3313 1.50 3597 1.96

46V 958 0.03 1896 0.25 2447 0.57 2831 0.89 3145 1.24 3418 1.63 3664 2.04

800 885

1278 0.07 2214 0.39 2819 0.82 3248 1.30 3596 1.81

46V 1278 0.06 2040 0.30 2642 0.68 3067 1.10 3405 1.53 3687 1.97

1000 1106

1598 0.14 2358 0.47 3016 0.99 3474 1.54 3841 2.12

46V 1597 0.12 2210 0.38 2792 0.78 3252 1.26 3618 1.78

1200 1327

1918 0.23 2527 0.56 3183 1.16 3671 1.79

46V 1917 0.21 2441 0.51 2937 0.89 3403 1.41 3792 1.99

1400 1548

2237 0.37 2743 0.71 3324 1.30 3847 2.05

46V 2236 0.33 2694 0.68 3111 1.05 3544 1.57 3939 2.18

1600 1770

2557 0.55 3002 0.92 3484 1.49 3990 2.26

46V 2555 0.50 2962 0.89 3335 1.30 3704 1.78

1800 1991

2877 0.79 3274 1.18 3677 1.73

46V 2875 0.71 3240 1.14 3579 1.61 3902 2.08

2000 2212

3196 1.08 3556 1.50 3904 2.05

46V 3194 0.97 3526 1.44 3836 1.97

2200 2433

3516 1.44 3844 1.88

46V 3514 1.29 3817 1.80

2400 2655

3835 1.87

46V 3833 1.67 4113 2.22

Size 12 – Type DA – A46---126DA---ST_ _ _ _ and A46V--126DA---ST_ _ _ _

Performance shown is for belt drive fans, installation Type D: ducted inlet/ducted outlet. Power ratings (BHP) include drive losses. Performance ratings do not include the effects of appurtenances in the airstream.

Series 46 denotes standard configuration. Series 46V denotes addition of guide vane section.

To complete model code add motor enclosure code, motor horsepower code, and motor speed code. Refer to page 2 for additional model code information.

Outlet

Static Pressure

Series CFM Velocity 0"

⁄2'' 1'' 11⁄2'' 2'' 21⁄2'' 3'' 4''

FPM

RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP

1200 773

719 0.02 1455 0.28 1872 0.65 2167 1.06 2408 1.51 2615 2.00 2801 2.52

46V 767 0.03 1284 0.20 1683 0.47 1969 0.81 2197 1.20 2396 1.63 2573 2.08 2885 3.07

1600 1030

958 0.05 1582 0.34 2025 0.77 2347 1.26 2603 1.77 2822 2.32 3016 2.90

46V 1023 0.06 1423 0.25 1789 0.53 2098 0.89 2350 1.30 2562 1.76 2745 2.26 3066 3.34

2000 1288

1198 0.11 1652 0.40 2160 0.89 2494 1.43 2769 2.03 3003 2.65 3207 3.30

46V 1279 0.12 1602 0.34 1913 0.63 2202 0.99 2463 1.42 2690 1.89 2891 2.41

2400 1545

1437 0.19 1800 0.50 2259 1.00 2629 1.61 2910 2.25 3156 2.95

46V 1534 0.21 1807 0.45 2070 0.77 2325 1.14 2567 1.56 2796 2.05 3004 2.58

2800 1803

1677 0.29 1976 0.64 2328 1.12 2747 1.79 3046 2.50 3292 3.23

46V 1790 0.33 2029 0.61 2252 0.95 2477 1.34 2695 1.77 2903 2.25 3107 2.78

3200 2060

1916 0.44 2171 0.81 2467 1.31 2797 1.93 3164 2.74

46V 2046 0.50 2259 0.80 2453 1.16 2651 1.58 2847 2.04 3038 2.53 3222 3.06

3600 2318

2156 0.62 2379 1.03 2632 1.55 2905 2.17 3217 2.93

46V 2301 0.71 2495 1.05 2668 1.43 2842 1.87 3017 2.35 3192 2.87 3362 3.41

4000 2575

2396 0.86 2597 1.30 2814 1.84 3053 2.48 3304 3.20

46V 2557 0.97 2733 1.34 2892 1.75 3047 2.21 3205 2.72 3362 3.26

4400 2833

2635 1.14 2820 1.62 3008 2.17 3220 2.84

46V 2813 1.29 2974 1.70 3122 2.14 3262 2.62 3405 3.14

4800 3090

2875 1.48 3046 2.00 3211 2.57 3400 3.26

46V 3068 1.68 3218 2.12 3356 2.59 3486 3.09

Size 16 – Type DA – A46---166DA---ST_ _ _ _ and A46V--166DA---ST_ _ _ _

Outlet

Static Pressure

Series CFM Velocity 0"

⁄2'' 1'' 11⁄2'' 2'' 21⁄2'' 3'' 4''

FPM

RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP

2000 1029

920 0.07 1448 0.43 1939 1.07 2261 1.76 2499 2.49 2703 3.27 2885 4.08 3203 5.84

46V 924 0.07 1335 0.34 1724 0.76 2051 1.31 2304 1.93 2509 2.59 2690 3.30 3003 4.84

2500 1287

1150 0.14 1555 0.52 2010 1.16 2384 1.98 2667 2.84 2890 3.72 3079 4.63 3408 6.57

46V 1155 0.14 1506 0.45 1801 0.85 2117 1.40 2397 2.07 2634 2.80 2835 3.57 3165 5.23

3000 1544

1380 0.25 1722 0.66 2072 1.26 2455 2.12 2773 3.09 3032 4.11 3250 5.16 3597 7.30

46V 1386 0.25 1690 0.60 1944 1.03 2193 1.54 2459 2.20 2707 2.95 2928 3.77 3301 5.57

3500 1801

1610 0.39 1905 0.85 2188 1.45 2512 2.26 2838 3.28 3123 4.39 3365 5.56 3762 7.99

46V 1617 0.39 1883 0.79 2117 1.26 2324 1.78 2539 2.39 2769 3.13 2990 3.96 3386 5.83

4000 2059

1840 0.59 2097 1.07 2351 1.73 2601 2.47 2895 3.46 3183 4.61 3443 5.87 3878 8.53

46V 1848 0.58 2082 1.01 2299 1.54 2492 2.11 2671 2.71 2857 3.40 3058 4.20 3448 6.07

4500 2316

2071 0.83 2297 1.35 2528 2.06 2747 2.82 2978 3.72 3241 4.85 3499 6.13

46V 2079 0.83 2287 1.30 2488 1.87 2670 2.49 2837 3.13 2995 3.81 3156 4.56 3512 6.38

5000 2573

2301 1.15 2504 1.69 2713 2.45 2915 3.26 3109 4.14 3324 5.18 3560 6.42

46V 2310 1.14 2496 1.64 2682 2.26 2853 2.93 3012 3.62 3161 4.34 3303 5.09 3601 6.81

5500 2830

2531 1.52 2714 2.11 2905 2.89 3092 3.77 3272 4.69 3448 5.67 3645 6.83

46V 2541 1.52 2710 2.06 2881 2.71 3043 3.43 3193 4.17 3335 4.95 3470 5.74 3727 7.42

6000 3088

2761 1.98 2929 2.60 3102 3.40 3277 4.35 3445 5.32 3609 6.34 3770 7.42

46V 2772 1.97 2927 2.55 3083 3.24 3237 4.01 3380 4.80 3515 5.62 3645 6.47 3889 8.22

6500 3345

2991 2.52 3146 3.18 3305 4.00 3466 4.98 3625 6.03 3778 7.09 3929 8.21

46V 3003 2.50 3146 3.13 3290 3.85 3434 4.65 3571 5.50 3700 6.37 3825 7.26

Size 18 – Type DA – A46---186DA---ST_ _ _ _ and A46V--186DA---ST_ _ _ _

Page 13

Bulletin A-118-V

www.hartzellfan.com

1 (800) 336-3267

Outlet

Static Pressure

Series CFM Velocity 0"

⁄2'' 1'' 11⁄2'' 2'' 21⁄2'' 3'' 4''

FPM

RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP

3600 1067

722 0.12 1046 0.61 1369 1.41 1631 2.40 1826 3.47 1982 4.61 2115 5.79 2350 8.38

46V 704 0.11 992 0.50 1256 1.09 1486 1.87 1670 2.75 1819 3.70 1944 4.69 2166 6.85

4500 1333

903 0.23 1165 0.79 1416 1.56 1680 2.60 1910 3.82 2093 5.10 2247 6.44 2498 9.27

46V 880 0.21 1118 0.67 1331 1.24 1543 2.01 1739 2.95 1908 3.98 2054 5.09 2293 7.45

5400 1600

1083 0.40 1303 1.03 1517 1.84 1725 2.82 1947 4.05 2154 5.47 2331 6.96 2618 10.10

46V 1055 0.37 1259 0.89 1443 1.51 1617 2.24 1795 3.15 1967 4.21 2123 5.38 2389 7.93

6300 1867

1264 0.64 1452 1.34 1638 2.21 1820 3.21 1997 4.37 2186 5.75 2374 7.33 2696 10.80

46V 1231 0.58 1409 1.19 1571 1.86 1726 2.63 1874 3.49 2026 4.50 2179 5.66 2456 8.31

7200 2133

1444 0.95 1609 1.73 1773 2.67 1934 3.72 2092 4.90 2248 6.21 2408 7.70 2738 11.20

46V 1407 0.87 1565 1.56 1711 2.28 1849 3.10 1983 4.00 2113 4.98 2243 6.06 2511 8.69

8100 2400

1625 1.36 1772 2.21 1918 3.21 2062 4.34 2205 5.56 2345 6.89 2484 8.34

46V 1583 1.24 1724 2.02 1857 2.80 1983 3.67 2104 4.61 2224 5.62 2340 6.71 2573 9.18

9000 2667

1805 1.86 1938 2.79 2069 3.86 2200 5.06 2329 6.34 2458 7.71 2584 9.18

46V 1759 1.70 1887 2.57 2008 3.42 2124 4.34 2236 5.33 2345 6.39 2452 7.52 2661 9.96

9900 2933

1986 2.48 2107 3.49 2226 4.62 2345 5.88 2464 7.24 2581 8.67 2698 10.2

46V 1935 2.26 2052 3.22 2164 4.16 2271 5.12 2374 6.17 2475 7.28 2574 8.45 2769 11.00

10800 3200

2167 3.22 2277 4.31 2386 5.51 2496 6.83 2605 8.26 2714 9.76 2821 11.3

46V 2111 2.93 2219 3.98 2322 5.01 2422 6.04 2518 7.13 2613 8.29 2705 9.51

11700 3467

2347 4.09 2450 5.27 2550 6.54 2651 7.92 2752 9.42 2853 11.0

46V 2287 3.73 2387 4.86 2483 5.99 2576 7.10 2667 8.23 2755 9.44 2842 10.7

Size 24 – Type DA – A46---246DA---ST_ _ _ _ and A46V--246DA---ST_ _ _ _

Series 46 denotes standard configuration. Series 46V denotes addition of guide vane section.

To complete model code add motor enclosure code, motor horsepower code, and motor speed code. Refer to page 2 for additional model code information.

Outlet

Static Pressure

Series CFM Velocity 0"

⁄2'' 1'' 11⁄2'' 2'' 21⁄2'' 3'' 4''

FPM

RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP

4800 1056

587 0.14 895 0.78 1160 1.80 1341 2.97 1493 4.25 1627 5.62 1747 7.09 1958 10.30

46V 599 0.14 850 0.69 1076 1.46 1272 2.46 1423 3.58 1556 4.83 1675 6.19 1883 9.21

6000 1319

734 0.28 971 0.97 1229 2.04 1429 3.35 1583 4.76 1716 6.28 1837 7.89 2053 11.30

46V 749 0.28 957 0.92 1140 1.71 1322 2.70 1495 3.92 1631 5.22 1751 6.62 1964 9.74

7200 1583

880 0.48 1082 1.26 1287 2.31 1499 3.71 1670 5.27 1806 6.91 1927 8.65 2141 12.40

46V 899 0.48 1079 1.23 1236 2.10 1385 3.08 1536 4.24 1690 5.63 1823 7.13 2039 10.30

8400 1847

1027 0.76 1204 1.64 1366 2.70 1554 4.09 1735 5.75 1891 7.56 2015 9.41 2232 13.40

46V 1049 0.76 1209 1.63 1345 2.57 1479 3.64 1605 4.79 1731 6.07 1867 7.60 2110 11.00

9600 2111

1174 1.13 1330 2.11 1474 3.26 1623 4.60 1789 6.26 1949 8.14 2092 10.20 2320 14.40

46V 1198 1.14 1343 2.12 1465 3.15 1583 4.29 1699 5.54 1810 6.84 1920 8.26 2153 11.60

10800 2375

1321 1.61 1459 2.68 1592 3.93 1715 5.28 1856 6.90 2004 8.78 2147 10.90 2402 15.40

46V 1348 1.62 1480 2.72 1592 3.86 1697 5.07 1802 6.39 1905 7.80 2004 9.250 2199 12.40

12000 2639

1467 2.20 1592 3.37 1715 4.74 1828 6.17 1941 7.74 2070 9.59 2204 11.70 2458 16.40

46V 1498 2.22 1618 3.44 1723 4.69 1819 5.99 1914 7.37 2008 8.86 2101 10.40 2279 13.70

13200 2903

1614 2.93 1728 4.19 1840 5.65 1947 7.20 2048 8.83 2154 10.60 2271 12.70

46V 1648 2.96 1758 4.29 1857 5.66 1947 7.06 2033 8.52 2119 10.10 2205 11.70 2372 15.20

14400 3167

1761 3.81 1865 5.17 1969 6.71 2069 8.39 2164 10.10 2257 11.90 2355 13.90

46V 1798 3.84 1900 5.29 1993 6.78 2078 8.28 2158 9.84 2237 11.40 2316 13.20 2472 16.80

15600 3430

1908 4.84 2004 6.30 2100 7.93 2194 9.70 2284 11.50 2371 13.40 2456 15.40

46V 1947 4.88 2043 6.45 2130 8.05 2211 9.68 2287 11.30 2360 13.00 2432 14.80

Size 28 – Type DA – A46---286DA---ST_ _ _ _ and A46V--286DA---ST_ _ _ _

Outlet

Static Pressure

Series CFM Velocity 0"

⁄2'' 1'' 11⁄2'' 2'' 21⁄2'' 3'' 4''

FPM

RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP

7500 1263

622 0.28 851 1.18 1100 2.62 1282 4.24 1434 6.06 1562 8.00 1674 10.10 1865 14.40

46V 624 0.29 813 1.04 981 2.04 1152 3.35 1298 4.89 1420 6.58 1521 8.390 1691 12.30

9000 1515

746 0.49 939 1.49 1141 2.91 1340 4.75 1493 6.67 1629 8.78 1748 11.00 1951 15.80

46V 749 0.50 911 1.37 1054 2.41 1195 3.70 1339 5.25 1469 7.01 1583 8.920 1775 13.10

10500 1768

871 0.78 1037 1.90 1198 3.30 1386 5.22 1551 7.36 1686 9.56 1809 11.90 2023 17.00

46V 874 0.80 1016 1.80 1142 2.90 1263 4.21 1384 5.73 1509 7.50 1626 9.450 1832 13.80

12000 2020

995 1.16 1141 2.42 1283 3.87 1427 5.65 1598 7.99 1744 10.40 1867 12.90

46V 998 1.19 1127 2.32 1239 3.53 1347 4.88 1451 6.42 1556 8.14 1667 10.10 1875 14.50

13500 2273

1119 1.65 1249 3.06 1377 4.60 1502 6.39 1633 8.52 1789 11.20 1923 14.00

46V 1123 1.69 1240 2.96 1341 4.29 1439 5.71 1535 7.29 1627 9.02 1719 10.90 1915 15.30

15000 2525

1244 2.27 1360 3.83 1477 5.47 1589 7.32 1702 9.42 1823 11.90 1964 14.80

46V 1248 2.32 1356 3.73 1448 5.19 1538 6.71 1625 8.33 1710 10.10 1794 12.00 1962 16.30

16500 2778

1368 3.02 1474 4.73 1580 6.50 1684 8.42 1786 10.60 1889 12.90 1999 15.60

46V 1373 3.09 1472 4.63 1558 6.22 1640 7.86 1721 9.57 1800 11.40 1878 13.40

18000 3031

1493 3.92 1593 5.80 1687 7.69 1784 9.70 1877 11.90 1971 14.30 2066 16.90

46V 1498 4.01 1590 5.69 1671 7.41 1747 9.18 1821 11.00 1895 12.90 1967 14.90

19500 3283

1617 4.98 1714 7.06 1796 9.05 1886 11.20 1974 13.40 2060 15.90

46V 1622 5.10 1708 6.92 1785 8.76 1856 10.70 1925 12.60 1994 14.60 2062 16.70

21000 3536

1741 6.23 1836 8.50 1907 10.60 1991 12.80 2075 15.20

46V 1747 6.37 1827 8.32 1901 10.30 1968 12.30 2032 14.40 2097 16.50

Size 32 – Type DA – A46---326DA---ST_ _ _ _ and A46V--326DA---ST_ _ _ _

Page 14

Bulletin A-118-V

www.hartzellfan.com

1 (800) 336-3267

Outlet

Static Pressure

Series CFM Velocity 0"

⁄2'' 1'' 11⁄2'' 2'' 21⁄2'' 3'' 4''

FPM

RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP

8000 1071

475 0.22 703 1.22 907 2.77 1062 4.69 1189 6.82 1297 9.09 1392 11.50 1558 16.70

46V 473 0.20 661 1.02 830 2.12 985 3.58 1111 5.33 1216 7.30 1310 9.43 1473 14.10

10000 1339

594 0.44 775 1.54 958 3.12 1116 5.13 1248 7.44 1362 9.96 1462 12.60 1636 18.30

46V 592 0.38 751 1.35 882 2.50 1020 3.94 1151 5.67 1266 7.64 1366 9.83 1535 14.70

12000 1607

712 0.75 866 2.00 1016 3.64 1167 5.65 1300 8.03 1418 10.70 1522 13.60 1703 19.70

46V 710 0.66 848 1.75 965 3.09 1072 4.51 1188 6.21 1300 8.17 1405 10.30 1588 15.30

14000 1875

831 1.19 963 2.58 1090 4.31 1223 6.38 1351 8.77 1469 11.50 1575 14.40 1761 21.00

46V 829 1.05 950 2.29 1056 3.78 1151 5.34 1243 7.01 1342 8.94 1440 11.10 1625 16.00

16000 2143

950 1.78 1066 3.29 1179 5.17 1291 7.30 1407 9.74 1519 12.40 1626 15.40 1814 22.10

46V 947 1.57 1055 3.02 1151 4.52 1240 6.34 1322 8.12 1401 10.00 1487 12.10 1660 17.00

18000 2411

1068 2.54 1171 4.17 1274 6.20 1372 8.44 1473 10.90 1576 13.70 1677 16.70

46V 1065 2.24 1164 3.92 1251 5.43 1334 7.39 1410 9.430 1482 11.40 1552 13.50 1705 18.30

20000 2679

1187 3.48 1280 5.25 1373 7.41 1462 9.79 1551 12.40 1642 15.20 1735 18.20

46V 1184 3.07 1273 4.98 1354 6.61 1430 8.56 1503 10.80 1571 13.10 1636 15.30 1764 20.00

22000 2946

1306 4.63 1390 6.54 1475 8.82 1558 11.40 1638 14.00 1718 16.90 1802 20.00

46V 1302 4.08 1384 6.21 1459 8.05 1529 9.94 1598 12.30 1663 14.80 1725 17.30 1842 22.20

24000 3214

1425 6.02 1502 8.07 1579 10.50 1656 13.10 1731 16.00 1805 19.00 1878 22.10

46V 1420 5.30 1497 7.65 1566 9.71 1632 11.70 1696 14.00 1758 16.60 1818 19.40

26000 3482

1543 7.65 1614 9.84 1686 12.30 1757 15.20 1828 18.20 1896 21.30

46V 1539 6.74 1609 9.29 1675 11.60 1737 13.70 1796 15.90 1855 18.60 1912 21.50

Size 36 – Type DA – A46---366DA---ST_ _ _ _ and A46V--366DA---ST_ _ _ _

Series 46 denotes standard configuration. Series 46V denotes addition of guide vane section.

To complete model code add motor enclosure code, motor horsepower code, and motor speed code. Refer to page 2 for additional model code information.

Outlet

Static Pressure

Series CFM Velocity 0"

⁄2'' 1'' 11⁄2'' 2'' 21⁄2'' 3'' 4''

FPM

RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP

12000 1086

392 0.35 587 1.96 763 4.38 885 7.23 977 10.5 1055 13.9 1126 17.5 1251 25.0

46V 393 0.34 553 1.65 699 3.50 825 5.84 924 8.49 1004 11.4 1075 14.5 1202 21.3

15000 1358

490 0.68 641 2.44 804 5.05 940 8.15 1046 11.6 1132 15.3 1204 19.4 1330 28.0

46V 492 0.66 623 2.19 741 4.10 859 6.50 966 9.30 1058 12.4 1138 15.7 1266 22.9

18000 1630

588 1.17 713 3.07 846 5.83 980 9.14 1095 12.8 1191 16.8 1273 21.1 1408 30.3

46V 590 1.14 701 2.87 805 5.00 900 7.40 1000 10.2 1094 13.4 1179 16.9 1324 24.6

21000 1901

686 1.86 794 3.92 902 6.81 1020 10.3 1134 14.2 1236 18.4 1326 22.9 1475 32.6

46V 688 1.81 784 3.77 876 6.10 962 8.68 1044 11.5 1130 14.7 1213 18.3 1364 26.2

24000 2173

784 2.77 879 5.08 972 8.01 1070 11.6 1174 15.7 1274 20.1 1367 24.9

46V 787 2.70 872 4.91 952 7.40 1031 10.2 1106 13.2 1177 16.4 1251 20.0 1398 28.0

27000 2445

882 3.95 966 6.54 1050 9.48 1132 13.2 1223 17.4 1315 22.0 1405 27.0

46V 885 3.84 962 6.31 1033 8.97 1105 12.0 1174 15.2 1240 18.6 1304 22.2 1435 30.1

30000 2716

980 5.41 1056 8.30 1132 11.3 1205 15.1 1281 19.5 1364 24.2 1447 29.3

46V 983 5.26 1053 8.00 1118 10.9 1182 14.0 1246 17.5 1308 21.1 1368 24.8 1482 32.8

33000 2988

1078 7.21 1147 10.4 1216 13.6 1284 17.4 1351 21.9 1421 26.7 1496 31.9

46V 1082 7.01 1146 10.0 1205 13.1 1263 16.4 1322 20.0 1380 23.9 1436 27.9

36000 3259

1176 9.36 1239 12.8 1302 16.3 1366 20.0 1427 24.6 1488 29.6

46V 1180 9.10 1239 12.4 1294 15.7 1348 19.2 1401 23.0 1455 27.0 1508 31.2

39000 3531

1274 11.9 1332 15.6 1390 19.4 1449 23.2 1507 27.7 1563 32.8

46V 1278 11.6 1333 15.1 1385 18.7 1435 22.4 1484 26.3 1533 30.5

Size 44 – Type DA – A46---44DA---ST_ _ _ _ and A46V--44DA---ST_ _ _ _

Outlet

Static Pressure

Series CFM Velocity 0"

⁄2'' 1'' 11⁄2'' 2'' 21⁄2'' 3'' 4''

FPM

RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP

14000 1064

354 0.39 536 2.29 698 5.15 809 8.50 892 12.3 964 16.4 1028 20.6 1143 29.4

46V 355 0.38 503 1.92 639 4.11 754 6.88 844 10.0 918 13.4 983 17.1 1100 25.2

17500 1330

442 0.76 583 2.84 735 5.92 859 9.57 955 13.6 1034 18.0 1099 22.8 1215 33.0

46V 444 0.74 566 2.53 676 4.79 786 7.64 884 11.0 968 14.6 1040 18.5 1157 27.0

21000 1595

531 1.32 648 3.56 772 6.81 896 10.7 1001 15.1 1089 19.8 1163 24.8 1285 35.7

46V 532 1.28 636 3.32 732 5.82 822 8.65 915 12.0 1001 15.8 1079 19.9 1211 29.0

24500 1861

619 2.09 720 4.52 821 7.93 932 12.0 1037 16.6 1130 21.6 1212 26.9 1347 38.3

46V 621 2.04 711 4.34 796 7.07 876 10.1 952 13.4 1033 17.3 1110 21.5 1248 30.8

28000 2127

708 3.13 796 5.83 883 9.30 975 13.6 1073 18.3 1165 23.6 1250 29.2 1396 41.2

46V 710 3.04 789 5.63 864 8.55 938 11.9 1007 15.4 1073 19.2 1143 23.4 1279 32.9

31500 2393

796 4.45 875 7.47 952 11.0 1030 15.4 1115 20.3 1201 25.8 1284 31.6 1435 44.2

46V 799 4.33 870 7.22 937 10.3 1004 13.9 1068 17.7 1129 21.6 1188 25.8 1311 35.3

35000 2659

885 6.10 955 9.46 1026 13.0 1095 17.5 1166 22.7 1244 28.3 1322 34.3

46V 887 5.93 952 9.13 1013 12.5 1073 16.2 1133 20.3 1190 24.5 1245 28.9 1351 38.3

38500 2925

973 8.13 1037 11.8 1102 15.6 1165 20.1 1227 25.4 1294 31.1 1365 37.3

46V 976 7.90 1036 11.4 1091 15.0 1146 18.9 1200 23.2 1254 27.7 1306 32.4 1406 42.2

42000 3191

1062 10.5 1120 14.6 1179 18.6 1238 23.1 1295 28.5 1353 34.4 1415 40.8

46V 1065 10.3 1120 14.1 1172 18.0 1221 22.1 1271 26.5 1322 31.3 1371 36.2

45500 3457

1150 13.4 1204 17.8 1258 22.1 1313 26.7 1367 32.0 1419 38.1 1472 44.7

46V 1154 13.0 1204 17.1 1253 21.4 1299 25.7 1345 30.3 1392 35.3 1438 40.5

Size 48 – Type DA – A46---486DA---ST_ _ _ _ and A46V--486DA---ST_ _ _ _

Page 15

Bulletin A-118-V

www.hartzellfan.com

1 (800) 336-3267

Outlet

Static Pressure

Series CFM Velocity 0"

⁄2'' 1'' 11⁄2'' 2'' 21⁄2'' 3'' 4''

FPM

RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP

20000 1196

357 0.72 498 3.23 640 7.00 746 11.4 827 16.4 892 21.8 950 27.6 1052 39.6

46V 358 0.70 477 2.81 585 5.60 687 9.16 773 13.3 843 17.7 902 22.5 1006 32.9

24000 1435

428 1.24 543 3.95 668 7.93 780 12.7 870 18.0 944 23.7 1006 29.8 1109 43.2

46V 430 1.20 531 3.59 623 6.57 713 10.1 799 14.4 876 19.1 943 24.2 1052 35.1

28000 1674

500 1.96 598 4.86 701 9.04 808 14.1 903 19.7 983 25.7 1052 32.2 1165 46.1

46V 501 1.91 588 4.59 671 7.85 747 11.5 825 15.7 901 20.5 970 25.8 1091 37.3

32000 1913

571 2.93 658 6.06 743 10.4 838 15.6 931 21.5 1015 27.9 1088 34.6 1211 49.2

46V 573 2.85 650 5.84 724 9.35 793 13.3 859 17.5 927 22.3 995 27.7 1118 39.5

36000 2153

642 4.18 719 7.64 795 12.0 875 17.4 960 23.5 1042 30.2 1118 37.3 1249 52.5

46V 644 4.06 714 7.39 779 11.1 844 15.3 905 19.8 963 24.6 1023 29.9 1143 41.9

40000 2392

714 5.73 783 9.56 852 14.0 920 19.6 995 25.8 1072 32.7 1146 40.1 1280 56.0

46V 716 5.57 779 9.24 838 13.2 897 17.7 954 22.5 1009 27.5 1061 32.8 1169 44.8

44000 2631

785 7.62 848 11.8 911 16.3 973 22.0 1037 28.5 1106 35.5 1176 43.1

46V 788 7.41 846 11.4 900 15.7 953 20.3 1007 25.5 1058 30.8 1107 36.3 1202 48.2

48000 2870

856 9.90 914 14.5 972 19.2 1029 24.9 1085 31.6 1146 38.8 1210 46.5

46V 859 9.62 913 14.0 963 18.5 1012 23.4 1061 28.8 1110 34.4 1156 40.3 1245 52.6

52000 3109

928 12.6 981 17.6 1035 22.6 1088 28.2 1140 35.0 1192 42.5 1249 50.4

46V 931 12.2 980 16.9 1027 21.8 1072 26.9 1118 32.5 1163 38.4 1208 44.6 1293 57.4

56000 3348

999 15.7 1048 21.1 1098 26.5 1148 32.1 1197 38.9 1245 46.5 1294 54.7

46V 1002 15.3 1049 20.3 1093 25.6 1135 31.0 1177 36.7 1219 42.8 1261 49.3

Size 54 – Type DA – A46---546DA---ST_ _ _ _ and A46V--546DA---ST_ _ _ _

Series 46 denotes standard configuration. Series 46V denotes addition of guide vane section.

To complete model code add motor enclosure code, motor horsepower code, and motor speed code. Refer to page 2 for additional model code information.

Outlet

Static Pressure

Series CFM Velocity 0"

⁄2'' 1'' 11⁄2'' 2'' 21⁄2'' 3'' 4''

FPM

RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP

25000 1217

327 0.92 451 4.03 579 8.70 675 14.2 749 20.3 807 27.0 860 34.2 952 49.2

46V 328 0.90 434 3.53 529 6.97 621 11.4 699 16.4 763 22.0 816 27.8 910 40.8

30000 1460

392 1.59 493 4.95 604 9.88 706 15.8 787 22.3 854 29.4 911 36.9 1004 53.5

46V 393 1.55 483 4.53 565 8.22 645 12.6 722 17.8 791 23.6 852 29.9 952 43.5

35000 1704

457 2.53 545 6.13 636 11.3 731 17.5 817 24.4 889 31.9 952 39.9 1055 57.1

46V 459 2.46 536 5.79 610 9.85 678 14.4 746 19.6 814 25.5 877 32.0 986 46.3

40000 1947

522 3.78 600 7.68 675 13.0 759 19.5 842 26.7 917 34.6 984 43.0 1096 61.1

46V 524 3.67 593 7.41 658 11.8 720 16.6 779 21.9 839 27.8 900 34.4 1011 49.0

45000 2190

588 5.38 656 9.71 724 15.1 794 21.8 870 29.3 943 37.5 1011 46.3 1129 65.3

46V 590 5.23 651 9.38 710 14.0 767 19.3 821 24.8 873 30.8 926 37.3 1033 52.1

50000 2434

653 7.38 715 12.2 776 17.6 836 24.6 902 32.3 970 40.7 1036 49.9

46V 655 7.18 711 11.8 764 16.7 816 22.2 867 28.2 915 34.5 962 41.0 1058 55.7

55000 2677

718 9.82 774 15.1 830 20.6 885 27.7 941 35.7 1003 44.4 1064 53.7

46V 721 9.55 772 14.6 820 19.8 868 25.6 915 32.0 961 38.6 1005 45.5 1089 60.2

60000 2920

784 12.8 835 18.5 886 24.4 937 31.4 987 39.6 1040 48.5 1096 58.1

46V 786 12.4 834 17.9 878 23.5 922 29.6 966 36.2 1009 43.3 1050 50.5 1130 65.8

65000 3164

849 16.2 896 22.5 944 28.7 991 35.6 1037 44.0 1083 53.3 1134 63.1

46V 852 15.8 896 21.6 937 27.7 978 34.1 1018 41.0 1058 48.3 1098 56.0

70000 3407

914 20.3 958 27.0 1002 33.7 1046 40.7 1090 49.0 1132 58.4 1176 68.6

46V 917 19.7 958 26.0 997 32.5 1035 39.3 1072 46.3 1110 54.0 1147 62.0

Size 60 – Type DA – A46---606DA---ST_ _ _ _ and A46V--606DA---ST_ _ _ _

Page 16

Bulletin A-118-V

www.hartzellfan.com

1 (800) 336-3267

General Construction Features

• Sizes 12" to 54"...performance from 1942 CFM at free air to 27,500 CFM at 2" SP.

• Motor out of the airstream, exterior mounting. Propeller shaft rotates in two

ball-bearings mounted on steel supports welded to the inner shell of the housing.

• Belts are oil, heat and static resistant type, oversized for continuous duty.

• Extended lube tubes from bearings to exterior of fan housing are standard.

• Installation position – Can be used in any position from horizontal to vertical.

• Vane Section – See Page 7.For performance characteristics, refer to rating tables,

Pages 17, 18, 19 and 20.

• Direct Drive Units – Ratings for direct drive fans are available. On direct drive

units, temperature must not exceed the motor ratings.

Standard Features with HS Propeller

• Housings – Hot-rolled steel is standard, material code ST. Stainless steel also

available.

• Propellers – Six-bladed single-camber airfoil design of welded steel construction

with split taper bushing. Type HS.

• Temperature – Standard high temperature construction – 500°F maximum with

ambient air less than 125°F. Units are furnished with high temperature grease, heat slinger, heat deflection plate and motor base heat sink.

• Finish – High temperature units are coated with an air dry enamel black finish

as standard.

Standard Features with CS Propeller

• Housings – 304 stainless steel is standard, material code S4.

• Propellers – Six-bladed single-camber, airfoil design of 304 stainless steel construc-

tion with straight bore. Type CS.

• Flanges – All sizes are furnished with welded ring flanges.

• Maximum temperature for corrosive applications is 200°F.

• Shaft Seal and Slinger – Standard for units in temperatures below 200°F.

Seal is not gas tight.

Series 46 High Temperature Fan Series 46 Corrosive Resistant Fan

Applications: Series 46 with HS Propeller

• Smoke and heat transmitted to 500°F

Series 46 with CS Propeller

• Corrosive areas where aluminum or fiberglass construction fails

• Food industry requiring stainless steel construction

Belt Drive Duct Axial®Fan

12 127⁄8 151⁄8 145⁄8 1225⁄16 62824

⁄8 145T 75 lbs. 16 lbs.

14 147⁄8 171⁄8 165⁄8 1225⁄16 63225

⁄8 145T 100 lbs. 34 lbs.

16 167⁄8 195⁄8 185⁄8 11⁄4 25

⁄16 x 5⁄8 63530

⁄8 182T 117 lbs. 27 lbs.

18 187⁄8 215⁄8 205⁄8 11⁄4 25

⁄16 x 5⁄8 63631

⁄8 213T 138 lbs. 41 lbs.

20 207⁄8 235⁄8 223⁄8 11⁄4 31

⁄16 x 5⁄8 64332

⁄8 213T 186 lbs. 49 lbs.

24 247⁄8 291⁄8 267⁄8 2317⁄16 x 3⁄4 64439

⁄8 215T 274 lbs. 80 lbs.

28 287⁄8 331⁄8 307⁄8 2317⁄16 x 3⁄4 64441

⁄8 254T 317 lbs. 98 lbs.

32 33 371⁄4 35 2 34

⁄16 x 3⁄4 64945

⁄4 254T 393 lbs. 126 lbs.

36 37 413⁄8 39 2 34

⁄16 x 3⁄4 65047

⁄4 256T 450 lbs. 157 lbs.

42 427⁄8 465⁄8 45 2 42

⁄16 x 3⁄4 12 61 4513⁄16 286T 654 lbs. 182 lbs. 48 491⁄8 531⁄2 515⁄8 2427⁄16 x 3⁄4 12 64 603⁄4 324T 761 lbs. 271 lbs. 54 553⁄8 603⁄4 575⁄8 21⁄2 42

⁄16 x 3⁄4 12 65 513⁄4 326T 932 lbs. 324 lbs.

Fan Size

ABCDFJKLM

Max. Mtr.

Frame

Weight-Less

Motor & Options

Inst. Wgt.

Vane Section

Principal Dimensions – Series 46 and 46V with CS or HS Propellers

Stock Models

Available in Hartzell’s

HRS Program.

NOTES: Dimensions and specifications are subject to change. Certified prints are available. Selected configurations of shaded sizes are available as stocked models in Hartzell’s HRS Program.

Page 17

Series 46 denotes standard configuration. Series 46V denotes addition of guide vane section.

To complete model code add wheel code, material of construction, motor enclosure code, motor horsepower code, and motor speed code. Refer to page 2 for additional model code information. Note: HS prop material of construction is steel (code ST). CS prop material of construction is 304 stainless steel (code S4).

Outlet

Static Pressure

Series CFM Velocity 0"

⁄4''

⁄2'' 1'' 11⁄2'' 2'' 21⁄2'' 3''

FPM

RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP

1,000 1106

1079 0.03 1502 0.09 1988 0.21 2686 0.51 3162 0.86 3535 1.25 3854 1.68 4139 2.14

46V 1085 0.03 1447 0.08 1845 0.17 2444 0.41 2877 0.70 3219 1.02 3503 1.37 3751 1.74

1250 1383

1349 0.05 1675 0.12 2051 0.23 2776 0.57 3301 0.95 3711 1.36 4054 1.82

46V 1356 0.05 1650 0.12 1947 0.21 2548 0.45 3005 0.75 3376 1.10 3689 1.48 3961 1.89

1500 1659

1618 0.08 1891 0.17 2176 0.28 2828 0.61 3391 1.04 3836 1.49 4206 1.97

46V 1627 0.09 1881 0.17 2108 0.26 2643 0.51 3109 0.82 3495 1.18 3825 1.57 4118 2.01

1750 1936

1888 0.13 2126 0.23 2355 0.35 2894 0.65 3446 1.10 3921 1.61

46V 1898 0.14 2123 0.23 2318 0.33 2745 0.58 3203 0.90 3597 1.27 3939 1.68 4241 2.12

2000 2212

2158 0.20 2371 0.31 2566 0.43 3005 0.73 3501 1.16 3976 1.68

46V 2169 0.21 2373 0.31 2545 0.43 2893 0.68 3298 1.00 3690 1.37 4038 1.79

2250 2489

2427 0.29 2624 0.41 2793 0.54 3162 0.85 3585 1.24 4028 1.76

46V 2440 0.31 2627 0.42 2783 0.54 3085 0.81 3419 1.12 3785 1.50 4131 1.93

2500 2765

2697 0.39 2881 0.53 3031 0.67 3350 1.00 3709 1.38 4102 1.86

46V 2711 0.42 2884 0.54 3027 0.68 3300 0.96 3579 1.28 3895 1.66 4226 2.09

2750 3042

2967 0.52 3140 0.67 3275 0.82 3560 1.17 3869 1.56 4209 2.01

46V 2983 0.56 3143 0.69 3277 0.83 3526 1.15 3774 1.48 4040 1.85

3000 3318

3236 0.68 3400 0.84 3526 1.00 3782 1.36 4054 1.77

46V 3254 0.72 3403 0.86 3530 1.02 3761 1.36 3987 1.71 4216 2.08

3250 3595

3506 0.86 3660 1.04 3780 1.21 4014 1.59

46V 3525 0.92 3664 1.07 3785 1.24 4001 1.60 4211 1.97

Size 12 – Type CS or HS – A46---126_S---_ _ _ _ _ _ and A46V--126_S---_ _ _ _ _ _

Size 14 – Type CS or HS – A46---146_S---_ _ _ _ _ _ and A46V--146_S---_ _ _ _ _ _

Bulletin A-118-V

www.hartzellfan.com

1 (800) 336-3267

Outlet

Static Pressure

Series CFM Velocity 0"

⁄4''

⁄2'' 1'' 11⁄2'' 2'' 21⁄2'' 3''

FPM

RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP

1,400 901

861 0.04 1189 0.14 1566 0.31 2118 0.75 2495 1.26 2791 1.83 3042 2.46

46V 866 0.04 1146 0.13 1456 0.25 1928 0.60 2270 1.02 2541 1.50 2767 2.01 2962 2.55

1800 1159

1107 0.08 1353 0.19 1630 0.35 2194 0.84 2616 1.41 2944 2.03 3219 2.70

46V 1113 0.09 1337 0.19 1555 0.32 2021 0.67 2384 1.12 2678 1.63 2929 2.19 3146 2.80

2200 1416

1353 0.15 1556 0.28 1761 0.44 2242 0.91 2686 1.55 3047 2.24

46V 1360 0.16 1551 0.28 1719 0.42 2107 0.78 2474 1.24 2782 1.76 3045 2.35

2600 1674

1599 0.25 1775 0.39 1940 0.57 2319 1.01 2733 1.64 3109 2.40

46V 1608 0.26 1776 0.40 1918 0.56 2218 0.92 2561 1.38 2869 1.93 3142 2.53

3000 1932

1845 0.38 2004 0.55 2142 0.74 2448 1.18 2797 1.77 3156 2.52

46V 1855 0.40 2006 0.56 2132 0.73 2379 1.12 2658 1.58 2957 2.13 3228 2.75

3400 2189

2091 0.55 2237 0.74 2357 0.94 2613 1.42 2902 1.97 3217 2.69

46V 2103 0.58 2240 0.76 2354 0.95 2571 1.37 2796 1.83 3050 2.38

3800 2447

2337 0.77 2473 0.98 2580 1.20 2803 1.71 3046 2.28

46V 2350 0.82 2476 1.01 2581 1.22 2777 1.67 2972 2.16 3180 2.70

4200 2704

2584 1.03 2711 1.27 2809 1.51 3007 2.04 3217 2.65

46V 2597 1.10 2713 1.31 2812 1.54 2992 2.03 3167 2.55

4600 2962

2830 1.36 2949 1.62 3042 1.87 3220 2.44

46V 2845 1.45 2952 1.67 3046 1.92 3212 2.45

5000 3219

3076 1.74 3187 2.03

46V 3092 1.86 3192 2.10

Size 16 – Type CS or HS – A46---166_S---_ _ _ _ _ _ and A46V--166_S---_ _ _ _ _ _

Outlet

Static Pressure

Series CFM Velocity 0"

⁄4''

⁄2'' 1'' 11⁄2'' 2'' 21⁄2'' 3''

FPM

RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP

1,200 994

959 0.03 1327 0.11 1751 0.26 2367 0.63 2788 1.05 3117 1.53 3398 2.06 3650 2.62

46V 964 0.03 1279 0.11 1627 0.21 2154 0.50 2537 0.86 2839 1.25 3090 1.68 3309 2.14

1500 1243

1199 0.06 1483 0.15 1808 0.29 2445 0.70 2909 1.17 3272 1.68 3575 2.23

46V 1205 0.07 1462 0.15 1719 0.26 2246 0.55 2649 0.92 2976 1.35 3253 1.82 3493 2.32

1800 1492

1438 0.11 1676 0.21 1923 0.34 2491 0.74 2987 1.28 3381 1.83

46V 1446 0.11 1668 0.21 1865 0.32 2330 0.62 2740 1.01 3081 1.45 3371 1.93 3630 2.47

2100 1740

1678 0.17 1886 0.29 2084 0.43 2552 0.81 3035 1.34 3453 1.97

46V 1687 0.18 1884 0.29 2053 0.42 2423 0.72 2824 1.11 3170 1.56 3472 2.06

2400 1989

1918 0.25 2104 0.39 2273 0.54 2654 0.91 3085 1.42 3501 2.06

46V 1928 0.27 2106 0.39 2256 0.53 2558 0.84 2909 1.23 3254 1.69 3559 2.21

2700 2237

2158 0.36 2330 0.51 2477 0.67 2797 1.06 3163 1.53 3549 2.16

46V 2169 0.38 2333 0.52 2468 0.67 2731 1.00 3019 1.39 3338 1.85 3642 2.38

3000 2486

2397 0.50 2558 0.66 2688 0.83 2966 1.24 3276 1.70 3617 2.29

46V 2410 0.53 2561 0.68 2686 0.84 2924 1.20 3165 1.59 3438 2.05

3300 2734

2637 0.66 2788 0.84 2906 1.02 3154 1.45 3421 1.94

46V 2651 0.70 2791 0.86 2908 1.04 3126 1.43 3341 1.84 3570 2.29

3600 2983

2877 0.86 3020 1.05 3130 1.25 3353 1.70 3588 2.21

46V 2892 0.91 3022 1.09 3133 1.28 3335 1.69 3532 2.13

3900 3232

3117 1.09 3251 1.30 3356 1.52 3559 1.98

46V 3133 1.16 3255 1.35 3361 1.55 3549 2.00

Page 18

Bulletin A-118-V

www.hartzellfan.com

1 (800) 336-3267

Series 46 denotes standard configuration. Series 46V denotes addition of guide vane section.

Outlet

Static Pressure

Series CFM Velocity 0"

⁄4''

⁄2'' 1'' 11⁄2'' 2'' 21⁄2'' 3''

FPM

RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP

2,000 1029

781 0.05 1045 0.17 1388 0.38 1883 0.92 2192 1.50 2447 2.15 2670 2.86 2875 3.61

46V 795 0.06 1016 0.16 1260 0.29 1695 0.68 1999 1.18 2242 1.73 2450 2.34 2633 2.97

2500 1287

976 0.10 1174 0.23 1424 0.43 1944 1.01 2315 1.70 2581 2.42 2807 3.18

46V 994 0.11 1171 0.23 1351 0.37 1747 0.76 2082 1.26 2345 1.85 2564 2.51 2757 3.20

3000 1544

1172 0.17 1333 0.32 1515 0.51 1970 1.10 2376 1.85 2691 2.66

46V 1193 0.19 1342 0.33 1486 0.48 1806 0.87 2133 1.38 2417 1.98 2659 2.64 2861 3.38

3500 1801

1367 0.28 1506 0.44 1650 0.64 2010 1.20 2405 1.97 2746 2.86

46V 1392 0.30 1521 0.46 1644 0.63 1902 1.03 2187 1.54 2467 2.14 2718 2.82

4000 2059

1562 0.41 1686 0.60 1805 0.81 2090 1.35 2433 2.11 2775 3.02

46V 1590 0.45 1705 0.63 1813 0.82 2032 1.24 2268 1.75 2520 2.35 2766 3.03

4500 2316

1757 0.59 1868 0.79 1973 1.02 2207 1.57 2490 2.29 2801 3.20

46V 1789 0.64 1892 0.84 1989 1.05 2180 1.50 2382 2.02 2597 2.62 2821 3.30

5000 2573

1953 0.80 2053 1.03 2148 1.27 2349 1.84 2580 2.54 2848 3.42

46V 1988 0.88 2081 1.09 2169 1.33 2341 1.82 2517 2.36 2702 2.96

5500 2830

2148 1.07 2240 1.32 2327 1.58 2503 2.16 2700 2.87

46V 2187 1.17 2271 1.40 2353 1.66 2510 2.19 2666 2.75 2830 3.38

6000 3088

2343 1.39 2427 1.65 2509 1.94 2666 2.55 2840 3.27

46V 2386 1.52 2463 1.77 2539 2.04 2684 2.62 2827 3.22

6500 3345

2539 1.77 2616 2.05 2692 2.35 2838 3.00

46V 2584 1.93 2657 2.21 2726 2.49 2861 3.11

Size 18 – Type CS or HS – A46---186_S---_ _ _ _ _ _ and A46V--186_S---_ _ _ _ _ _

Size 20 – Type CS or HS – A46---206_S---_ _ _ _ _ _ and A46V--206_S---_ _ _ _ _ _

Outlet

Static Pressure

Series CFM Velocity 0"

⁄4''

⁄2'' 1'' 11⁄2'' 2'' 21⁄2'' 3''

FPM

RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP

3,600 1067

632 0.11 808 0.31 1004 0.60 1317 1.40 1543 2.33 1721 3.37 1876 4.49 2015 5.70

46V 634 0.11 794 0.30 964 0.55 1268 1.24 1477 2.06 1653 3.00 1811 4.03 1954 5.15

4500 1333

790 0.21 920 0.44 1081 0.76 1380 1.57 1620 2.59 1815 3.73 1976 4.95 2118 6.24

46V 793 0.21 915 0.43 1049 0.71 1326 1.42 1561 2.31 1738 3.30 1893 4.38 2033 5.55

5400 1600

948 0.37 1050 0.62 1179 0.96 1444 1.80 1683 2.85 1886 4.06 2060 5.38

46V 952 0.37 1049 0.62 1164 0.94 1386 1.65 1618 2.57 1820 3.64 1978 4.78 2119 6.00

6300 1867

1107 0.58 1191 0.88 1292 1.21 1523 2.12 1744 3.17 1947 4.42 2127 5.81

46V 1110 0.58 1195 0.89 1284 1.21 1476 1.98 1673 2.89 1872 3.99 2051 5.21

7200 2133

1265 0.87 1337 1.21 1420 1.55 1617 2.51 1817 3.61 2008 4.84 2187 6.26

46V 1269 0.87 1343 1.23 1416 1.56 1588 2.41 1749 3.32 1927 4.41 2102 5.66

8100 2400

1423 1.24 1486 1.62 1557 2.00 1722 2.96 1903 4.13 2080 5.40

46V 1427 1.24 1494 1.65 1558 2.01 1706 2.91 1855 3.90 2000 4.96 2158 6.20

9000 2667

1581 1.69 1638 2.12 1699 2.54 1839 3.50 2001 4.75 2162 6.07

46V 1586 1.70 1646 2.16 1704 2.58 1829 3.48 1969 4.58 2099 5.68

9900 2933

1739 2.26 1790 2.72 1845 3.19 1966 4.16 2107 5.41

46V 1745 2.27 1800 2.77 1853 3.24 1960 4.16 2087 5.33

10800 3200

1897 2.93 1944 3.44 1993 3.95 2101 4.97

46V 1903 2.94 1954 3.50 2003 4.02 2099 4.99

11700 3467

2055 3.72 2098 4.27 2143 4.83

46V 2062 3.74 2109 4.35 2154 4.92

Size 24 – Type CS or HS – A46---246_S---_ _ _ _ _ _ and A46V--246_S---_ _ _ _ _ _

Outlet

Static Pressure

Series CFM Velocity 0"

⁄4''

⁄2'' 1'' 11⁄2'' 2'' 21⁄2'' 3''

FPM

RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP

2,400 1010

761 0.07 982 0.21 1275 0.45 1742 1.09 2037 1.79 2271 2.56 2476 3.38

46V 775 0.08 964 0.20 1169 0.36 1565 0.81 1852 1.38 2077 2.03 2270 2.74 2441 3.50

3000 1262

951 0.14 1120 0.29 1324 0.52 1788 1.20 2140 2.01 2400 2.88 2608 3.78

46V 968 0.15 1121 0.30 1273 0.46 1613 0.91 1922 1.49 2172 2.17 2375 2.93 2555 3.76

3600 1515

1141 0.24 1281 0.42 1431 0.64 1813 1.30 2186 2.18 2485 3.16

46V 1162 0.26 1291 0.43 1414 0.62 1682 1.07 1969 1.65 2230 2.34 2456 3.11

4200 1767

1332 0.38 1452 0.58 1573 0.82 1867 1.45 2210 2.33 2526 3.38

46V 1356 0.42 1467 0.61 1573 0.82 1792 1.29 2031 1.87 2277 2.56 2507 3.35

4800 2020

1522 0.57 1629 0.79 1730 1.04 1964 1.68 2249 2.52 2550 3.58

46V 1549 0.62 1648 0.84 1742 1.07 1927 1.58 2125 2.17 2339 2.85 2555 3.64

5400 2272

1712 0.81 1808 1.06 1898 1.33 2093 1.98 2322 2.79 2585 3.81

46V 1743 0.89 1831 1.13 1916 1.39 2080 1.93 2250 2.54 2428 3.23

6000 2524

1902 1.12 1989 1.39 2071 1.68 2239 2.35 2429 3.16

46V 1937 1.22 2016 1.48 2093 1.76 2242 2.36 2390 3.00 2546 3.71

6600 2777

2093 1.49 2172 1.78 2247 2.10 2396 2.80 2560 3.62

46V 2130 1.62 2203 1.91 2274 2.21 2410 2.86 2543 3.54

7200 3029

2283 1.93 2355 2.25 2426 2.59 2561 3.33

46V 2324 2.11 2391 2.42 2456 2.75 2582 3.44

7800 3282

2473 2.45 2540 2.80 2606 3.17

46V 2518 2.68 2580 3.02

Page 19

Bulletin A-118-V

www.hartzellfan.com

1 (800) 336-3267

Series 46 denotes standard configuration. Series 46V denotes addition of guide vane section.

Outlet

Static Pressure

Series CFM Velocity 0"

⁄4''

⁄2'' 1'' 11⁄2'' 2'' 21⁄2'' 3''

FPM

RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP

3,600 792

465 0.08 657 0.31 846 0.66 1112 1.58 1297 2.65 1450 3.85 1585 5.16 1708 6.57

46V 466 0.08 634 0.29 814 0.60 1064 1.40 1248 2.36 1405 3.47 1542 4.70 1664 6.02

4800 1056

620 0.19 752 0.45 910 0.82 1182 1.81 1388 3.02 1550 4.35 1687 5.78 1810 7.32

46V 622 0.19 745 0.44 875 0.76 1140 1.63 1330 2.68 1485 3.85 1620 5.15 1746 6.56

6000 1319

775 0.36 872 0.66 996 1.07 1241 2.08 1454 3.37 1630 4.83 1779 6.40

46V 777 0.37 870 0.66 978 1.03 1191 1.90 1401 3.03 1567 4.30 1704 5.67 1827 7.14

7200 1583

930 0.63 1008 0.98 1102 1.39 1313 2.48 1513 3.77 1692 5.30 1849 6.98

46V 933 0.63 1010 0.99 1094 1.38 1267 2.30 1452 3.43 1629 4.77 1784 6.25

8400 1847

1084 1.00 1150 1.40 1225 1.83 1402 3.00 1581 4.33 1751 5.85

46V 1088 1.00 1155 1.43 1221 1.83 1375 2.87 1521 3.98 1680 5.32 1835 6.85

9600 2111

1239 1.49 1296 1.96 1358 2.42 1504 3.60 1664 5.04 1820 6.60

46V 1244 1.50 1302 1.99 1359 2.44 1490 3.54 1620 4.75 1749 6.05

10800 2375

1394 2.12 1444 2.64 1497 3.17 1619 4.34 1760 5.89

46V 1399 2.13 1452 2.70 1502 3.21 1611 4.32 1733 5.68 1846 7.04

12000 2639

1549 2.91 1594 3.49 1641 4.07 1745 5.27 1865 6.82

46V 1554 2.92 1602 3.55 1648 4.14 1740 5.28 1849 6.72

13200 2903

1704 3.87 1744 4.51 1786 5.15 1878 6.44

46V 1710 3.89 1753 4.59 1795 5.25 1877 6.48

14400 3167

1859 5.03

46V 1865 5.05

Size 28 – Type Type CS or HS – A46---286_S---_ _ _ _ _ _ and A46V--286_S---_ _ _ _ _ _

Size 32 – Type CS or HS – A46---326_S---_ _ _ _ _ _ and A46V--326_S---_ _ _ _ _ _

Outlet

Static Pressure

Series CFM Velocity 0"

⁄4''

⁄2'' 1'' 11⁄2'' 2'' 21⁄2'' 3''

FPM

RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP

6,000 804

343 0.12 499 0.52 656 1.16 877 2.68 1031 4.48 1155 6.52 1262 8.76 1358 11.20

46V 347 0.13 483 0.48 615 0.97 818 2.34 969 4.01 1094 5.88 1201 7.88 1298 10.00

8000 1071

458 0.29 571 0.73 693 1.41 919 3.17 1090 5.15 1226 7.35 1341 9.75 1440 12.40

46V 462 0.30 569 0.73 666 1.26 860 2.65 1016 4.43 1145 6.48 1258 8.73 1358 11.10

10000 1339

572 0.56 665 1.09 754 1.74 953 3.68 1130 5.90 1275 8.31 1399 10.90

46V 578 0.58 665 1.10 746 1.69 903 3.13 1057 4.92 1189 7.04 1304 9.42 1407 12.00

12000 1607

687 0.97 768 1.62 838 2.29 997 4.16 1163 6.69 1312 9.32 1442 12.10

46V 693 1.00 767 1.63 837 2.27 967 3.81 1100 5.65 1229 7.77 1347 10.20 1451 12.80

14000 1875

801 1.53 874 2.31 933 3.03 1061 4.87 1203 7.36 1346 10.40

46V 809 1.59 872 2.33 934 3.05 1049 4.70 1159 6.61 1274 8.78 1386 11.20

16000 2143

916 2.29 982 3.20 1035 4.01 1142 5.88 1260 8.28 1386 11.20

46V 924 2.37 980 3.23 1035 4.04 1138 5.81 1236 7.82 1333 10.10 1434 12.50

18000 2411

1030 3.26 1091 4.30 1140 5.23 1233 7.17 1332 9.53 1440 12.40

46V 1040 3.38 1090 4.35 1138 5.27 1233 7.16 1322 9.29 1408 11.60

20000 2679

1145 4.47 1200 5.64 1247 6.70 1330 8.75 1416 11.20

46V 1156 4.63 1200 5.72 1244 6.76 1331 8.79 1413 11.00

22000 2946

1259 5.95 1310 7.24 1355 8.45 1431 10.70

46V 1271 6.17 1312 7.37 1352 8.53 1431 10.70

24000 3214

1374 7.72 1421 9.14 1463 10.50

46V 1387 8.00 1424 9.32 1461 10.60

Size 36 – Type CS or HS – A46---366_S---_ _ _ _ _ _ and A46V--366_S---_ _ _ _ _ _

Outlet

Static Pressure

Series CFM Velocity 0"

⁄4''

⁄2'' 1'' 11⁄2'' 2'' 21⁄2'' 3''

FPM

RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP

6,000 1010

435 0.15 582 0.51 742 1.09 993 2.46 1173 4.06 1315 5.86 1435 7.85 1543 9.98

46V 439 0.16 574 0.49 701 0.92 925 2.10 1096 3.58 1236 5.26 1357 7.07 1466 8.98

7500 1263

544 0.30 661 0.70 783 1.27 1028 2.83 1220 4.58 1374 6.51 1504 8.59 1617 10.90

46V 549 0.31 660 0.70 761 1.17 963 2.37 1137 3.89 1282 5.67 1407 7.63 1519 9.72

9000 1515

653 0.52 752 0.99 847 1.55 1061 3.20 1255 5.14 1417 7.22 1556 9.45

46V 659 0.54 753 1.00 840 1.51 1008 2.75 1175 4.28 1322 6.09 1450 8.13 1564 10.30

10500 1768

761 0.83 851 1.39 928 1.96 1104 3.56 1287 5.71 1452 7.96 1595 10.40

46V 768 0.86 850 1.40 927 1.95 1070 3.26 1218 4.83 1360 6.64 1490 8.68 1606 11.00

12000 2020

870 1.24 952 1.89 1018 2.50 1163 4.07 1324 6.19 1484 8.73 1628 11.30

46V 878 1.28 950 1.90 1019 2.50 1148 3.90 1273 5.52 1402 7.37 1527 9.43 1645 11.70

13500 2273

979 1.76 1054 2.51 1114 3.18 1237 4.76 1375 6.82 1519 9.37

46V 988 1.83 1051 2.53 1114 3.20 1231 4.68 1343 6.37 1455 8.26 1570 10.40

15000 2525

1088 2.42 1157 3.26 1213 4.01 1321 5.64 1438 7.65 1566 10.10

46V 1098 2.50 1155 3.30 1212 4.04 1320 5.61 1422 7.39 1521 9.34 1623 11.50

16500 2778

1196 3.21 1260 4.15 1314 5.00 1411 6.69 1513 8.71 1624 11.10

46V 1207 3.33 1260 4.21 1311 5.04 1411 6.70 1506 8.57 1598 10.60

18000 3031

1305 4.17 1365 5.20 1416 6.15 1504 7.94 1597 10.00

46V 1317 4.33 1365 5.28 1412 6.21 1506 7.98 1594 9.94

19500 3283

1414 5.31 1470 6.43 1518 7.48 1602 9.41

46V 1427 5.50 1471 6.54 1515 7.55 1602 9.47

Page 20

Bulletin A-118-V

www.hartzellfan.com

1 (800) 336-3267

Series 46 denotes standard configuration. Series 46V denotes addition of guide vane section.

Outlet

Static Pressure

Series CFM Velocity 0"

⁄4''

⁄2'' 1'' 11⁄2'' 2'' 21⁄2'' 3''

FPM

RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP

8,000 798

257 0.12 408 0.70 544 1.58 724 3.70 850 6.27 952 9.17 1042 12.3 1122 15.7

46V 259 0.13 389 0.61 508 1.33 678 3.29 804 5.65 907 8.25 997 11.1 1077 14.2

10000 997

321 0.24 438 0.84 564 1.83 754 4.16 890 6.86 998 9.95 1089 13.3 1171 17.0

46V 324 0.25 430 0.80 531 1.54 703 3.56 833 6.09 940 8.94 1032 12.0 1114 15.3

12000 1197

385 0.41 481 1.07 585 2.06 777 4.64 921 7.55 1036 10.8 1133 14.3 1217 18.1

46V 389 0.43 480 1.06 562 1.84 726 3.87 858 6.50 968 9.50 1063 12.8 1147 16.3

14000 1396

449 0.66 533 1.39 616 2.35 796 5.14 944 8.27 1065 11.7 1167 15.4 1257 19.3

46V 454 0.68 533 1.39 605 2.23 749 4.32 882 6.93 993 10.0 1089 13.5 1176 17.2

16000 1596

514 0.98 588 1.81 657 2.77 816 5.60 964 9.01 1089 12.6 1195 16.5

46V 518 1.02 588 1.83 653 2.71 778 4.88 904 7.53 1016 10.6 1114 14.2 1202 18.0

18000 1795

578 1.40 646 2.35 706 3.33 842 6.08 983 9.78 1109 13.6 1218 17.7

46V 583 1.45 646 2.36 705 3.31 816 5.56 929 8.26 1038 11.4 1138 14.9 1226 18.8

20000 1995

642 1.91 706 2.99 759 4.02 875 6.72 1004 10.4 1127 14.7 1238 19.0

46V 648 1.98 705 3.02 759 4.02 860 6.38 960 9.15 1062 12.3 1159 15.8 1250 19.7

22000 2194

706 2.55 766 3.75 814 4.84 916 7.54 1030 11.2 1147 15.6

46V 713 2.64 764 3.79 815 4.87 908 7.35 998 10.2 1091 13.4 1183 17.0

24000 2394

770 3.31 827 4.64 872 5.83 962 8.56 1063 12.1 1170 16.4

46V 778 3.43 825 4.69 871 5.87 959 8.46 1042 11.4 1125 14.7 1210 18.3

26000 2593

835 4.21 887 5.66 930 6.96 1013 9.76 1102 13.2 1199 17.5

46V 842 4.36 886 5.73 929 7.02 1012 9.72 1090 12.8 1165 16.1 1243 19.8

Size 42 – Type Type CS or HS – A46---426_S---_ _ _ _ _ _ and A46V--426_S---_ _ _ _ _ _

Size 48 – Type CS or HS – A46---486_S---_ _ _ _ _ _ and A46V--486_S---_ _ _ _ _ _

Outlet

Static Pressure

Series CFM Velocity 0"

⁄4''

⁄2'' 1'' 11⁄2'' 2'' 21⁄2'' 3''

FPM

RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP

12,500 747

196 0.18 318 1.11 425 2.51 564 5.90 662 10.0 742 14.6 812 19.7 875 25.1

46V 198 0.19 302 0.96 396 2.12 529 5.27 627 9.02 708 13.2 778 17.7 841 22.7

15000 897

235 0.32 334 1.27 437 2.82 584 6.46 688 10.7 771 15.6 842 21.0 905 26.7

46V 237 0.33 326 1.18 410 2.36 545 5.61 645 9.61 728 14.1 800 18.9 864 24.0

17500 1046

274 0.50 357 1.50 449 3.12 600 7.05 709 11.6 797 16.6 869 22.2 934 28.2

46V 277 0.52 354 1.46 426 2.68 559 5.96 662 10.1 747 14.8 820 20.0 885 25.4

20000 1196

314 0.75 386 1.84 463 3.41 612 7.67 726 12.4 817 17.7 895 23.4 961 29.7

46V 317 0.78 385 1.82 448 3.09 573 6.40 677 10.6 763 15.5 838 20.9 904 26.6

22500 1345

353 1.07 418 2.26 483 3.80 624 8.31 740 13.3 835 18.9 915 24.8 985 31.2

46V 356 1.10 418 2.26 475 3.60 587 6.97 691 11.2 778 16.2 854 21.7 922 27.7

25000 1495

392 1.46 452 2.77 508 4.31 636 8.88 752 14.3 850 20.1 932 26.3

46V 396 1.52 452 2.79 504 4.20 605 7.66 704 11.9 793 16.9 869 22.6 938 28.7

27500 1644

431 1.95 487 3.40 537 4.96 650 9.45 764 15.2 862 21.3 947 27.8

46V 435 2.02 487 3.42 535 4.91 626 8.47 719 12.8 806 17.8 883 23.5 953 29.7

30000 1794

471 2.53 523 4.13 568 5.74 668 10.1 776 16.1 874 22.6 960 29.3

46V 475 2.62 522 4.16 567 5.72 651 9.41 736 13.8 820 18.9 898 24.5 967 30.8

32500 1943

510 3.21 559 4.97 600 6.64 690 11.0 789 16.9 885 23.9 972 30.9

46V 514 3.33 558 5.02 600 6.66 679 10.5 756 15.0 835 20.1 911 25.8 981 32.0

35000 2093

549 4.01 596 5.93 634 7.68 715 12.0 805 17.9 897 25.0 984 32.5

46V 554 4.16 595 5.99 634 7.72 708 11.7 779 16.3 852 21.5 925 27.2

Size 54 – Type CS or HS – A46---546_S---_ _ _ _ _ _ and A46V--546_S---_ _ _ _ _ _

Outlet

Static Pressure

Series CFM Velocity 0"

⁄4''

⁄2'' 1'' 11⁄2'' 2'' 21⁄2'' 3''

FPM

RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP

10,000 760

245 0.18 370 0.88 490 1.98 654 4.58 768 7.71 861 11.3 941 15.1 1013 19.3

46V 248 0.19 356 0.79 459 1.65 611 4.04 724 6.93 817 10.1 898 13.6 970 17.3

12000 912

294 0.31 395 1.04 505 2.24 676 5.06 798 8.33 895 12.1 977 16.1 1050 20.5

46V 297 0.32 389 0.99 477 1.89 630 4.32 746 7.37 841 10.8 924 14.5 998 18.5

14000 1064

343 0.50 429 1.28 522 2.46 693 5.56 821 9.04 923 12.9 1010 17.1 1084 21.7

46V 347 0.51 427 1.27 501 2.20 647 4.64 765 7.78 863 11.4 947 15.3 1022 19.5

16000 1216

392 0.74 468 1.61 545 2.76 707 6.07 839 9.78 946 13.8 1037 18.2

46V 396 0.77 468 1.61 533 2.59 665 5.09 783 8.22 882 11.9 968 16.0 1045 20.4

18000 1368

441 1.05 510 2.02 575 3.16 722 6.56 854 10.5 965 14.8 1059 19.4

46V 446 1.09 510 2.03 570 3.07 686 5.63 800 8.79 900 12.5 987 16.7 1065 21.3

20000 1519

490 1.44 554 2.52 610 3.68 740 7.02 869 11.3 981 15.8 1078 20.6

46V 495 1.50 554 2.54 608 3.64 712 6.29 818 9.50 917 13.2 1005 17.4 1084 22.1

22000 1671

540 1.92 599 3.12 649 4.32 762 7.59 884 12.0 995 16.9 1094 21.9

46V 545 1.99 598 3.15 649 4.31 744 7.06 839 10.3 934 14.1 1023 18.3 1102 23.0

24000 1823

589 2.49 644 3.82 690 5.07 790 8.31 901 12.7 1010 17.9

46V 594 2.59 643 3.86 691 5.09 779 7.96 865 11.3 954 15.1 1039 19.3

26000 1975

638 3.17 690 4.63 733 5.95 822 9.19 922 13.5 1025 18.8

46V 644 3.29 689 4.68 733 5.99 816 8.98 895 12.4 976 16.3 1058 20.6

28000 2127

687 3.96 737 5.56 777 6.98 858 10.3 948 14.5 1043 19.7

46V 693 4.11 735 5.61 777 7.02 855 10.1 929 13.7 1003 17.6 1079 21.9

Page 21

Bulletin A-118-V

www.hartzellfan.com

1 (800) 336-3267

Fiberglass Fans/Protective Coatings

Fiberglass Duct Axial®Fans Belt Drive

For installations where extreme corrosive fumes are encountered, Hartzell fiberglass Duct Axial

fans give unsurpassed resistance to a wide variety of corrosive elements at a cost substantially below that of corrosion resistant metals. Fiberglass fans can be used in most applications where corrosive elements exist in fume and vapor form at temperatures less than 200°F.

Hartzell fiberglass belt drive Duct Axial

fans are identical in design and

performance to standard Hartzell Duct Axial

fans. Propellers, duct section and bearing covers are constructed of special corrosion-resistant fiberglass resin, plus flame-retardant additives to reduce the flame spread rate below 25.

• Stainless steel shaft with neoprene slinger and fiberglass neoprene

seal.

• Internal bolts are stainless steel and resin-coated after assembly.

Bolts and shaft are optional.

• Variable pitch drives are standard on most models. Belt adjustment

is easy.

• Lubrication fittings outside the duct and tubes are standard and are

not exposed to the main fan airstream.

• Bearings are heavy-duty ball or roller type.

• Bearings, belts and pulleys are on the intake or negative pressure

side.

• Sealed bearing covers.

• Sizes from 12" to 60", performance from 1330 CFM at free air to

61,500 CFM at 2" static pressure.

For complete details on fiberglass fans and blowers, see Bulletins A-131, A-137, A-139, A-140, A-141, A-410 and A-160.

Protective Coatings

On special request, protective coatings over standard Duct Axial®fans are available. These coatings are generally adequate protection against a moderately corrosive atmosphere.

Commonly used protective coatings include: double build epoxy, coal tar epoxy, inorganic zinc and polyurethane. These are air dry coatings. Other protective coatings are available to specifications upon request.

All Hartzell fans and blowers for corrosive applications are guaranteed for one year from the date of shipment.

For specific information on fiberglass Duct Axial

fans or protective coatings, contact your Hartzell sales representative. He is prepared to recommend the most dependable solution to your corrosion problem and provide experienced technical help.

Series 35

Page 22

Bulletin A-118-V

www.hartzellfan.com

1 (800) 336-3267

Belt Guard

Covers motor sheave and belts outside fan housing. Steel construction.

SAFETY ACCESSORIES, APPLICATION AND USE WARNING

The safe application and use of equipment supplied by Hartzell Fan, Inc. is the responsibility of the installer, the user, the owner, and the employer. Since the application and use of its equipment can vary greatly, Hartzell Fan, Inc. offers various product types, optional safety accessories, and sound performance data per laboratory tests. Hartzell Fan, Inc. sells its equipment with and without safety accessories, and accordingly, it can supply such safety accessories only upon receipt of an order.The need for safety accessories will frequently depend upon the type of system, fan location and operating procedures being employed.The proper protective safety accessories to meet company standards, local codes, and the requirements of the Occupation Safety and Health Act must be determined by the user since safety requirements vary depending on the location and use of the equipment. If applicable local conditions, standards, codes or OSHA rules require the addition of the safety accessories, the user should specify and obtain the required safety accessories from Hartzell Fan, Inc. and should not allow the operation of the equipment without them. Owners, employers, users and installers should read RECOMMENDED SAFETY PRACTICES FOR USERS AND INSTALLERS OF INDUSTRIAL AND COMMERCIAL FANS published by the Air Movement Control Association International, Inc., 30 West University Drive, Arlington Heights, Illinois 60004. A copy of this publication is enclosed with each fan shipped from Hartzell Fan, Inc., and is available upon request at Hartzell’s office in Piqua, Ohio 45356

Please contact Hartzell Fan, Inc. or your local Hartzell representative for more information on product types, safety accessories, and sound performance estimates.

Remember, the selection of safety accessories and the safe application and use of equipment supplied by Hartzell Fan, Inc. is your responsibility.

Protective Coatings

For corrosive applications, fans can be furnished with suitable protective coatings or constructed of stainless steel, or fiberglass.

Extended Electrical Leads

Motor electrical leads extended to the exterior of the fan casing are optional on direct drive duct Axial

fans.

Options and Accessories

Companion Flanges

Drilled to fit the flanges of the fan; allows easy installation.

Mounting Feet

Bolted to the inlet and discharge flanges, mounting feet allow positioning of the duct Axial

fan on the floor, ceiling, wall or platform. Can be used with vibration isolators.

Inlet Bell

Spun inlet orifice bell may be used in place of the inlet duct in installations where no duct work precedes the fan.

Ceiling Suspension

Horizontal or vertical mount. Brackets can be used with vibration isolators. Horizontal mounting shown.

Combination Motor Cover and Belt Guard

Designed to fit all belt drive duct Axial

fans. Covers are vented. Specify horizontal or vertical mounting. Steel construction.

Caution: The drive assembly or the periphery of the blades of a fan less than seven (7) feet above the floor or working level must be guarded to be in accordance with OSHA regulations.

Vibration Isolators

Rubber-in-shear or spring type isolators available on all models.

Shaft Seal and Slinger

Neoprene shaft seal held in position by coated steel cover plate, along with a neoprene shaft slinger, which is positioned between the bearing cover and propeller, are optional on standard and coated steel belt drive duct Axial

fans. These should be used when fans are placed in corrosive atmospheres which warrant protective coating and/or stainless steel shafting or hardware. Seal is not gas tight. (Note: shaft seal, cover plate and neoprene slinger are standard on aluminum belt duct fans.)

Guards

Spiral ring guard offers protection on intake or discharge side. Available in steel only.

Access Door

Hinged, quick release latches on access door allows for maintenance of internal parts of duct Axial

fans. Available for direct and belted drive units. Standard position for access door of belt drive duct fans is at 6 o’clock when motor is at 12. For direct drive units, standard position is at 10 o’clock.

Page 23

Bulletin A-118-V

www.hartzellfan.com

1 (800) 336-3267

Roof Mounted

Upblast

Together with stack cap and curb panel (shown), the Hartzell duct Axial

fans can be mounted as upblast roof exhausters. The backdraft dampers in the stack cap offer weather proof closure for vertical air discharge. The venturi curb panel offers a secure mounting base for the fan and an efficient inlet air condition.

Minimum velocity required through the stack cap for damper operation is 1300 fpm – maximum is 3200 fpm. For performance, refer to the appropriate duct fan rating table in this bulletin, allowing approximately 1/8" static pressure for stack cap resistance.

Sound Muffler

This sound attenuative device is a simple lined tube that can be used on either the intake or exhaust side of a Hartzell duct fan to reduce the noise.

It cannot be used in wet atmosphere or with

air velocities over 5000 FPM or above 250°F in the airstream.

The resistance to airflow is negligible since the internal surface is fairly smooth and the internal diameter of the muffler is the same as the fan with no internal obstruction to impede airflow.

In general, the muffler should be mounted between the fan and the area of concern (the listener). If both the intake and exhaust of the fan are critical, use a muffler on both sides of the fan.

The outstanding features of this muffler are:

• The typical attenuation for fans with discharge velocities from

1500-3000 FPM is approximately as follows for one muffler:

Band 1 2 3 4 5 6 7 8 dB Attenuation 0 1 3 10 13 12 10 8

• For one muffler the reduction in sone value is approximately

35%. With a muffler on both intake and exhaust, the sones are reduced approximately 50%.

• There is no appreciable static pressure loss when one or two

mufflers are inserted into a duct system.

• The mounting flanges match the corresponding fan flanges and

are drilled for easy attachment. By using flexible connections between fan and muffler, the sound attenuation is helped, particularly in the lower bands.

• The absorbent material has a black

rubberized surface next to the airstream which prevents erosion up to 5000 FPM velocity, and is held in place with an expanded metal liner.

Duct Fan with Bomb Bay Construction

The Bomb Bay arrangement offers easy access to the drive assembly. Unlatching the Bomb Bay section facilitates maintenance of belts, bearings, propeller and shaft of belt drive units and motor and propeller of direct drive units without removing the fan from the system.

Hooded

When required, the Hartzell duct Axial®fans with curb panels can be supplied with a weather hood. These built-up hooded power roof ventilators can be configured for exhaust or to supply air flow.

Air delivery and pressure drop through the hood are affected by air velocity. Please contact the factory for selection.

Accessories

General Construction Options

Duct Axial®Fans are available with a fan casing that is split, and swings out away from the assembly on a heavy-duty hinge. This feature allows easy, safe access to the fan propeller, shaft, bearing and drive components for inspection, cleaning, maintenance or removal without removing the entire fan or having personnel working directly over the roof opening.

Dimensions on Bomb Bay and Swing Out construction vary from standard units. Vane Section requires special construction. Please contact factory. Request certified prints. Unit pictured with roof mounted options.

Swing Out Construction

Page 24

Hartzell Warranty

Rev. Warranty 5/1/11

LIMITED WARRANTIES

Hartzell represents to Buyer that any goods to be delivered hereunder will be produced in compliance with the requirements of the Fair Labor Standards Act of 1938 as amended.

Hartzell also warrants to Buyer its goods to be free from defects in workmanship and material under normal use and service for one (1) year after tender of delivery by Hartzell, plus six months allowance for shipment to approved stocking dealers and distributors. No warranty extends to future performance of goods and any claims for breach of warranty or otherwise accrues upon tender of delivery.

The foregoing constitute Hartzell’s sole and exclusive warranties and are in lieu of all other warranties, whether written, oral, express, implied or statutory.

LIMITATION OF LIABILITY FOR BREACH OF WARRANTY

Hartzell’s obligation for any breach of warranty is limited to repairing or replacing, at its option, without cost to Buyer at its factory any goods which shall, within such a warranty period, be returned to it with transportation charges prepaid, and which its examination shall disclose to its satisfaction to have been defective. Any request for repair or replacement should be directed to Hartzell Fan, Inc., P.O. Box 919, Piqua, Ohio 45356. Hartzell will not pay for any repairs made outside its factory without its prior written consent. This does not apply to any such Hartzell goods which have failed as a result of faulty installation or abuse, or incorrect electrical connections or alterations, made by others, or use under abnormal operating conditions or misapplication of the goods.

LIMITATION OF LIABILITY

To the extent the above limitation of liability for breach of warranty is not applicable, the liability of Hartzell on any claim of any kind, including negligence, for any loss or damage arising out of or connected with, or resulting from the sale and purchase of the goods or services covered by these Terms and Conditions of Sale or from the performance or breach of any contract pertaining to such sale or purchase or from the design manufacture, sale, delivery, resale, installation, technical direction installation, inspection repair, operation or use of any goods or services covered by these Terms and Conditions shall, in no case exceed the price allocable to the goods or services which gave rise to the claim and shall terminate one year after tender of delivery of said goods or services, plus six months allowance for shipment to approved stocking dealers and distributors. In no event will Hartzell be responsible or liable for any labor or other incidental costs associated with the removal or replacement of defective products or materials.

In no event whether as a result of breach of contract, or warranty or alleged negligence, defects, incorrect advice or other causes, shall Hartzell be liable for special or consequential damages, including, but not limited to, loss of profits or revenue, loss of use of the equipment or any associated equipment, cost of substitute equipment, facilities or services, down time costs, or claims of customers of the Buyer for such damages. Hartzell neither assumes nor authorizes any person to assume for it any other liability in connection with the sale of its goods or services.

NO IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS

HARTZELL DOES NOT WARRANT THAT SAID GOODS ARE OF MERCHANTABLE QUALITY OR THAT THEY ARE FIT FOR ANY PARTICULAR PURPOSE. THERE IS NO IMPLIED WARRANTY OF MERCHANTABILITY AND THERE IS NO IMPLIED WARRANTY OF FITNESS.

www.hartzellfan.com

Propeller Fans

Vaneaxial Blowers

Heating Equipment –

Gas & Steam

Hartzell Fan, Inc., Piqua, Ohio 45356 • Plants in Piqua, Ohio and Portland, Indiana.

Cooling Tower &

Heat Exchanger Fans

Cool Blast & Utility Fans

Fiberglass

Axial Flow Fans

Duct Fans

Steel Centrifugal Blowers

Fiberglass Centrifugal

Blowers

Duct Axial Fans

Roof Ventilators –

Steel & Fiberglass

Marine –

Mine Duty Blowers

Litho in U.S.A. A-110-X 2/08