Hartzell 02SH-28 Click Here for the Hartzell Series 02 Spec Sheet

Download

HARTZELL

Hartzell Fan, Inc., Piqua, Ohio 45356

www.hartzellfan.com

Ring & Panel Fans Belt & Direct Drive Series 01 Series 02 Series 08 Series 09 Series 10 Series 14

Bulletin A-109-AJ May 2009

Propeller Fans and Wall Ventilators

Series 02S

“G” Duty Shown

Series 02S

“H” Duty Shown with

AL Adjustable Pitch Prop

CONFIGURATION 1 - RF

FAN ONLY

CONFIGURATION 1 - SF

FAN ONLY

Standard Panel Fan (Direct Drive)

STANDARD AIR FLOW – SERIES 02S

REVERSE AIR FLOW – SERIES 02R

• Series 02S – Standard Flow and 02R – Reverse Flow Direct Drive Panel Fans.

• “G” (General Industrial) Duty and “H” (Heavy Industrial) Duty construction are available.

See page 3 and performance rating table.

• Steel spun orifice panel.

• Sizes 12" to 60".

Hartzell Fan, Inc. certifies that the 02S-Direct Drive Panel Fan, Standard Flow and 02R- Direct Drive Panel Fan, Reverse Flow, shown hereon is licensed to bear the AMCA Seal. The ratings shown are based on tests and procedures performed in accordance with AMCA Standard 211 and comply with the requirements of the Certified Ratings Program.

Drawing for “G” (General Industrial) Duty construction shown, overall envelope dimensions of the “H” (Heavy Industrial) Duty construction will remain the same, except Fmax/F1max dimension, which is significantly larger for “H” Duty Construction.

MOTOR MAX MAX WT.

FAN

ABCD

MNPRSTU

FRAME

MOTOR STEEL (LESS

SIZE

(MAX) (MAX)

STEEL

MIN. MAX.

MOTOR WT.)

12 121⁄8 16 13⁄4 13⁄4 16 15 31⁄2 16 GA. 21⁄2 1 11.00 117⁄16 x 3⁄4 2

⁄8 48 145T 2 15

14 143⁄16 18 2 13⁄4 161⁄4 15 33⁄4 16 GA. 21⁄2 1 13.00 137⁄16 x 3⁄4 2

⁄8 48 145T 2 16

16 163⁄16 20 21⁄8 13⁄4 161⁄4 15 37⁄8 16 GA. 21⁄2 1 15.00 157⁄16 x 3⁄4 2

⁄8 48 145T 2 17

18 181⁄8 22 21⁄2 13⁄4 133⁄8 145⁄16 41⁄4 16 GA. 21⁄2 1 17.00 177⁄16 x 3⁄4 2

⁄8 48 56

⁄4 51

20 203⁄16 25 21⁄2 13⁄4 143⁄4 145⁄16 41⁄4 16 GA. 21⁄2 2 10.00 207⁄16 x 3⁄4 3

⁄8 48 143T 1 64

24 243⁄16 28 31⁄2 2143⁄4 145⁄16 51⁄2 14 GA. 21⁄2 2 11.50 237⁄16 x 3⁄4 3 1 48 145T 11⁄2 78

28 283⁄16 33 31⁄2 21⁄2 201⁄2 189⁄16 6 14 GA. 21⁄2 2 14.00 287⁄16 x 3⁄4 311⁄4 48 145T 2 102

32 323⁄16 36 31⁄2 23⁄4 201⁄2 183⁄4 61⁄4 14 GA. 21⁄2 2 15.50 317⁄16 x 3⁄4 313⁄8 48 184T 2 120

36 363⁄16 42 4 23⁄4 221⁄2 223⁄4 63⁄4 14 GA. 21⁄2 3 12.33 377⁄16 x 3⁄4 413⁄8 56 213T 3 147

40 403⁄16 46 43⁄8 23⁄4 223⁄4 223⁄4 71⁄8 14 GA. 21⁄2 3 13.66 417⁄16 x 3⁄4 413⁄8 56 215T 5 168

44 443⁄16 50 43⁄4 23⁄4 251⁄2 231⁄2 71⁄2 14 GA. 21⁄2 3 15.00 457⁄16 x 3⁄4 413⁄8 56 254T 5 183

48 483⁄16 54 43⁄4 23⁄4 251⁄2 231⁄2 71⁄2 14 GA. 21⁄2 3 16.33 497⁄16 x 3⁄4 413⁄8 56 254T 5 192

54 543⁄16 60 5 23⁄4 323⁄8 32 73⁄4 14 GA. 21⁄2 3 18.33 557⁄16 x 3⁄4 413⁄8 213T 365T 20 165

60 60

⁄16 66 51⁄2 23⁄4 333⁄4 335⁄8 81⁄4 14 GA. 21⁄2 3 20.33 617⁄16 x 3⁄4 413⁄8 213T 365T 20 279

Principal Dimensions

NOTE: Dimensions and specifications are subject to change. Certified prints are available. Dimensions for fan sizes 12", 14", 16", 54" and 60" are "H" Duty construction.

Bulletin A-1

09-AJ

www.hartzellfan.com

1 (800) 336-3267

Hartzell Fan, Inc. certifies that the Panel Fan, Series 02, herein, are authorized to bear CE Marking in accordance with Machinery Safety Directive 98/37/EC of the European Union. Reference Technical File E.S. 13.2.2.

ABS Certificate

of Design Assessment

Received

AIRFLOW

-SLOT

-REQ'D PER SIDE

SQUARE OUTSIDE

SQUARE

OUTSIDE

I.D.

-SPACE S

MAX.

REF.

AIRFLOW

-SLOT

-REQ'D PER SIDE

-SPACE S

MAX.

REF.

Peak CFM @ STATIC PRESSURE

Size Model Code

Motor

Fan

HP RPM BHP 0"

/8"

/4"

/8"

/2"5/8"

/4"

/8"1"11/4"11/2"

A_ _ _ _-126-P---STFCD2

⁄4 3450 0.24 1,926 1,803 1,688 1,533 1,236 ,960 ,765 ,603

A_ _ _ _-124-O---STFCD3

⁄4 1725 0.10 1,475 1,263

A_ _ _ _-142-N---STFCD2

⁄4 3450 0.22 2,302 2,005 1,715 1,187 ,592

A_ _ _ _-146-P---STFCG2

⁄4 3450 0.62 3,647 3,545 3,420 3,282 3,133 2,,950 2,680 2,160

14 A_ _ _ _-146-P---STFCD3

⁄4 1725 0.08 1,798 1,540 ,746

A_ _ _ _-144-O---STFCD3

⁄4 1725 0.16 2,263 1,975 ,765 ,493

A_ _ _ _-144-O---STFCD4

⁄4 1140 0.05 1,478 ,428

A_ _ _ _-162NA---STFCD3

⁄4 1725 0.09 2,124 1,552 ,400

A_ _ _ _-166-P---STFCD3

⁄4 1725 0.18 2,657 2,,360 1,930 1,123 ,760 ,525

16 A_ _ _ _-164-W---STFCD3

⁄4 1725 0.27 3,239 2,940 2,650 1,145 ,813

A_ _ _ _-162NB---STFCD4

⁄4 1140 0.06 2,046

A_ _ _ _-164-W---STFCD4

⁄4 1140 0.06 2,128 1,695 ,433

A_ _ _ _-184WA---STFCE3

⁄3 1740 0.35 4,280 3,995 3,675 3,185 1,495 1,095 ,635

A_ _ _ _-182NA---STFCD3

⁄4 1725 0.08 2,532 1,800 ,410

A_ _ _ _-188-Q---STFCD3

⁄4 1725 0.28 3,346 3,100 2,660 1,985 1,530 1,160

A_ _ _ _-183-L---STFCE3

⁄3 1750 0.34 3,530 3,170 2,760 2,260 1,395 ,710

A_ _ _ _-184WB---STFCE3

⁄3 1725 0.37 4,081 3,735 3,390 2,975 1,335

A_ _ _ _-184WA---STFCD4

⁄4 1185 0.12 2,915 2,465 ,960 ,310

A_ _ _ _-182NB---STFCD4

⁄4 1140 0.08 2,589 1,720

A_ _ _ _-184WA---STFCF5

⁄4 850 0.04 2,090 ,705

A_ _ _ _-208-Q---STFCH3 1 1750 0.98 6,082 5,805 5,515 5,125 2,850 2,350 2,000 1,755

A_ _ _ _-202NB---STFCD3

⁄4 1725 0.12 3,199 2,363 ,945

A_ _ _ _-202NA---STFCD3

⁄4 1725 0.24 4,168 3,495 2,525 ,785

A_ _ _ _-203-L---STFCF3

⁄2 1725 0.52 4,905 4,510 4,100 3,665 2,015 1,135 ,925

A_ _ _ _-206-P---STFCF3

⁄2 1725 0.50 4,985 4,600 4,175 3,520 2,190 1,445 1,305

A_ _ _ _-204-W---STFCG3

⁄4 1725 0.78 6,305 5,900 5,525 5,130 4,565 1,970 1,560

A_ _ _ _-202NA---STFCD4

⁄4 1140 0.07 2,728 ,945

A_ _ _ _-203-L---STFCD4

⁄4 1140 0.14 3,238 2,620 ,875

A_ _ _ _-206-P---STFCD4

⁄4 1140 0.15 3,316 2,690 1,170 ,760

A_ _ _ _-208-Q---STFCD4

⁄4 1140 0.26 3,935 3,480 1,560 1,115

A_ _ _ _-204-W---STFCD4

⁄4 1140 0.22 4,114 3,525 1,420 ,830

A_ _ _ _-208-Q---STFCD5

⁄4 850 0.11 2,934 1,305 ,660

A_ _ _ _-226-P---STFCH3 1 1750 0.98 7,170 6,775 6,350 5,905 5,425 4,500 2,930 2,450

A_ _ _ _-222-N---STFCD3

⁄4 1725 0.27 5,029 4,200 3,205 1,130

A_ _ _ _-226-P---STFCD4

⁄4 1140 0.27 4,647 3,990 2,400 1,555 ,915

A_ _ _ _-226-P---STFCD5

⁄4 850 0.11 3,465 2,400 ,860

Performance Data

Size 22" not available in Series 02S or 02R. Performance certified is for installation Type B: Free Inlet, Ducted Outlet. Speed (RPM) shown is nominal. Performance is based on actual speed of test. Performance ratings do not include the effects of appurtenances (accessories).

"G" (General Industrial) Duty construction available for models with shaded performance. "H" (Heavy Industrial) Duty construction available for all models.

Rating Table – Series 01S, 01R, 02S, 02R

Bulletin A-1

09-AJ

www.hartzellfan.com

1 (800) 336-3267

Performance certified is for installation Type B: Free Inlet, Ducted Outlet. Speed (RPM) shown is nominal. Performance is based on actual speed of test. Performance ratings do not include the effects of appurtenances (accessories).

"G" (General Industrial) Duty construction available for models with shaded performance. "H" (Heavy Industrial) Duty construction available for all models.

Rating Table – Series 01S, 01R, 02S, 02R

Bulletin A-1

09-AJ

www.hartzellfan.com

1 (800) 336-3267

Peak CFM @ STATIC PRESSURE

Size Model Code

Motor

Fan

HP RPM BHP 0"

/8"

/4"

/8"1/2"

/8"

/4"

/8"1"11/4"11/2"

A_ _ _ _-246-C---STFCK2 3 3450 3.40 10,679 10,435 10,190 9,945 9,680 9,420 9,140 8,860 8,540 7,900 7,270

A_ _ _ _-242NA---STFCD3

⁄4 1725 0.29 5,529 4,450 2,970

A_ _ _ _-246-C---STFCE3

⁄3 1725 0.45 5,324 4,820 4,245 3,605 2,955 2,205 1,450

A_ _ _ _-242NB---STFCF3

⁄2 1725 0.56 7,170 6,300 5,350 3,750 1,750

A_ _ _ _-242NC---STFCG3

⁄4 1725 0.80 7,936 7,225 6,460 5,490 2,800

A_ _ _ _-246PA---STFCH3 1 1750 1.10 8,436 8,075 7,610 7,100 6,605 6,020 5,060 3,825 3,020 2,090

A_ _ _ _-246PB---STFCI3 11⁄2 1750 1.50 9,529 9,140 8,740 8,310 7,800 7,085 6,070 4,160 3,500 2,590 1,860

A_ _ _ _-246PC---STFCJ3 2 1750 2.00 10,630 10,240 9,810 9,385 8,970 8,340 7,550 4,510 3,990 3,150 2,640

24 A_ _ _ _-244-W---STFCJ3 2 1750 2.10 11,067 10,610 10,090 9,705 9,225 8,670 7,880 4,100 3,330 2,560

A_ _ _ _-242NB---STFCD4

⁄4 1140 0.16 4,766 3,350

A_ _ _ _-242NC---STFCD4

⁄4 1140 0.23 5,245 4,155 1,560

A_ _ _ _-243-L---STFCE4

⁄3 1140 0.34 5,655 4,985 4,230 1,820

A_ _ _ _-244-W---STFCF4

⁄2 1140 0.57 7,221 6,540 5,770 2,640 1,790

A_ _ _ _-246PC---STFCF4

⁄2 1140 0.52 6,929 6,300 5,550 2,920 2,200

A_ _ _ _-242NC---STFCD5

⁄4 850 0.09 3,910 1,315

A_ _ _ _-243-L---STFCD5

⁄4 850 0.15 4,209 3,235 1,015

A_ _ _ _-244-W---STFCD5

⁄4 850 0.24 5,384 4,420 1,490

A_ _ _ _-282ND---STFCD3

⁄4 1725 0.28 6,724 5,000 2,750

A_ _ _ _-282NA---STFCF3

⁄2 1725 0.45 7,928 6,705 5,385 3,630 1,580

A_ _ _ _-282NB---STFCG3

⁄4 1725 0.71 10,032 8,910 7,820 6,440 4,260

A_ _ _ _-282NC---STFCH3 1 1750 1.00 10,571 9,600 8,590 7,450 5,225 2,900

A_ _ _ _-286PB---STFCI3 11⁄2 1750 1.60 10,677 10,205 9,700 9,185 8,620 7,985 7,260 6,340 5,170 3,710 2,370

A_ _ _ _-286PA---STFCJ3 2 1750 2.30 12,643 12,120 11,600 11,080 10,500 9,870 9,180 8,330 6,730 4,650 3,340

A_ _ _ _-288-C---STFCK3 3 1750 3.00 14,283 13,790 13,330 12,925 12,430 11,710 10,840 9,800 8,500 4,560 3,590

A_ _ _ _-282NE---STFCD4

⁄4 1140 0.17 5,823 3,530

28 A_ _ _ _-282NC---STFCD4

⁄4 1140 0.27 6,860 5,320 2,230

A_ _ _ _-283-L---STFCG4

⁄4 1140 0.77 8,739 8,035 7,245 6,250 3,700 2,190 1,510

A_ _ _ _-284-W---STFCH4 1 1160 1.10 10,991 10,240 9,470 8,630 7,600 3,310 2,600

A_ _ _ _-282NC---STFCD5

⁄4 850 0.11 5,110 2,200

A_ _ _ _-286PB---STFCD5

⁄4 850 0.18 5,166 4,105 2,185

A_ _ _ _-286PA---STFCD5

⁄4 850 0.26 6,155 5,035 2,925 1,435

A_ _ _ _-283-L---STFCE5

⁄3 850 0.31 6,470 5,450 3,790 1,400

A_ _ _ _-284-W---STFCF5

⁄2 850 0.44 8,040 7,030 5,800 2,150

A_ _ _ _-284-W---STFCD6

⁄4 690 0.23 6,526 5,225 1,825

A_ _ _ _-322NB---STFCH3 1 1750 1.00 12,627 11,320 9,915 8,200 5,130

A_ _ _ _-322NA---STFCJ3 2 1750 2.00 16,451 15,390 14,270 13,060 11,750 10,190 6,310

A_ _ _ _-326PB---STFCK3 3 1750 3.00 16,054 15,570 14,900 14,085 13,220 12,300 11,220 10,060 8,830 6,880 5,700

A_ _ _ _-326PA---STFCM3 71⁄2 1750 6.84 23,215 22,705 22,190 21,675 21,155 20,625 20,080 19,515 18,900 17,345

A_ _ _ _-322NB---STFCD4

⁄4 1140 0.27 8,184 6,040

A_ _ _ _-322NA---STFCF4

⁄2 1140 0.55 10,692 9,000 6,930 2,350

A_ _ _ _-326PB---STFCH4 1 1160 0.94 10,796 9,800 8,630 6,910 5,530 4,170 3,370 2,600 1,900

A_ _ _ _-323-L---STFCI4 1

⁄2 1160 1.60 13,293 12,370 11,430 10,460 8,900 4,660 3,490

A_ _ _ _-324-W---STFCJ4 2 1160 2.30 16,010 15,190 14,280 13,410 12,500 6,375 5,300 4,600 3,850

A_ _ _ _-322NA---STFCD5

⁄4 850 0.23 7,972 5,550

A_ _ _ _-323-L---STFCF5

⁄2 850 0.63 9,741 8,470 7,000 2,930

A_ _ _ _-326PA---STFCG5

⁄4 850 0.73 11,275 10,210 9,025 4,615 3,675

A_ _ _ _-324-W---STFCH5 1 870 0.94 12,007 10,870 9,700 4,780 3,400

A_ _ _ _-326PB---STFCD6

⁄4 690 0.19 6,422 4,380 2,160

A_ _ _ _-323-L---STFCE6

⁄3 690 0.34 7,907 6,300 2,350

A_ _ _ _-324-W---STFCF6

⁄2 690 0.48 9,523 8,050 3,510 2,060

Rating Table – Series 01S, 01R, 02S, 02R

"G" (General Industrial) Duty construction available for models with shaded performance. "H" (Heavy Industrial) Duty construction available for all models.

Bulletin A-1

09-AJ

www.hartzellfan.com

1 (800) 336-3267

Peak CFM @ STATIC PRESSURE

Size Model Code

Motor

Fan

HP RPM BHP 0"

/8"

/4"

/8"

/2"5/8"

/4"

/8"1"11/4"11/2"

A_ _ _ _-362ND---STFCH3 1 1750 1.10 15,418 13,500 11,290 8,110 5,210

A_ _ _ _-362NC---STFCJ3 2 1750 2.00 18,886 17,420 15,840 14,150 12,070 9,210 6,520

A_ _ _ _-362NB---STFCK3 3 1750 2.80 21,922 20,680 19,270 17,830 16,600 15,000 13,100 10,200 5,770

A_ _ _ _-368CB---STFCK3 3 1750 3.00 15,666 15,020 14,300 13,600 12,980 12,330 11,700 11,060 10,430 9,150 7,850

A_ _ _ _-366PC---STFCK3 3 1750 3.00 18,685 18,060 17,300 16,560 15,730 14,770 13,630 12,400 11,290 9,270 6,450

A_ _ _ _-366PA---STFCL3 5 1750 5.00 24,112 23,350 22,600 21,780 20,930 20,000 18,800 17,600 16,000 13,200 11,000

A_ _ _ _-368CC---STFCL3 5 1750 4.80 18,575 18,100 17,600 17,020 16,400 15,800 15,200 14,530 14,120 13,280 12,250

A_ _ _ _-368CD---STFCM3 71⁄2 1750 7.20 22,636 22,080 21,570 21,000 20,400 19,830 19,250 18,610 18,000 16,780 15,430

A_ _ _ _-368CA---STFCN3 10 1780 9.80 27,800 27,250 26,800 26,300 25,800 25,300 24,700 24,200 23,500 22,100 20,500

A_ _ _ _-362ND---STFCD4

⁄4 1140 0.29 9,952 6,600

A_ _ _ _-362NC---STFCF4

⁄2 1140 0.54 12,212 9,900 6,380

A_ _ _ _-362NA---STFCH4 1 1160 1.10 16,178 14,450 12,600 10,240 5,670

A_ _ _ _-366PA---STFCI4 11⁄2 1160 1.50 15,902 14,720 13,360 11,730 9,730 7,640 5,770 4,580 3,720

A_ _ _ _-366PB---STFCK4 3 1160 2.40 20,003 18,850 17,970 16,500 14,970 12,340 8,400 6,660 5,400

A_ _ _ _-364-W---STFCL4 5 1160 4.20 23,851 22,850 21,870 20,880 19,820 18,540 16,800 8,180 7,470 6,030 4,900

A_ _ _ _-362NC---STFCD5

⁄4 850 0.22 9,105 5,410

A_ _ _ _-362NA---STFCF5

⁄2 850 0.43 11,784 9,315 4,700

A_ _ _ _-363-L---STFCH5 1 870 1.00 14,170 12,970 11,610 9,970 5,600

A_ _ _ _-364-W---STFCI5 11⁄2 870 1.60 17,889 16,660 15,210 13,480 6,300 5,040

A_ _ _ _-362NA---STFCD6

⁄4 690 0.23 9,566 6,300

A_ _ _ _-363-L---STFCF6

⁄2 690 0.53 11,239 9,550 7,570 3,130

A_ _ _ _-364-W---STFCG6

⁄4 690 0.88 14,188 12,530 10,300 4,180 3,130

A_ _ _ _-402NC---STFCJ3 2 1750 2.10 21,648 19,650 17,930 16,030 13,800 11,000 8,000 5,370

A_ _ _ _-402NB---STFCK3 3 1750 3.00 24,600 22,820 21,200 19,370 17,200 14,450 10,600 7,200 4,550

A_ _ _ _-402ND---STFCH4 1 1160 0.94 17,457 14,880 12,000 7,000

A_ _ _ _-402NA---STFCJ4 2 1160 2.20 22,750 20,730 18,750 16,600 13,080 7,400 4,300

A_ _ _ _-406PA---STFCK4 3 1160 3.00 23,707 22,500 21,070 19,500 17,700 15,300 12,600 10,200 8,030 6,100

A_ _ _ _-406PB---STFCL4 5 1160 4.90 27,454 26,470 25,530 24,560 23,400 22,070 20,200 16,660 12,400 10,030 8,450

A_ _ _ _-404-W---STFCM4 71⁄2 1160 8.00 33,300 32,220 31,130 30,000 28,800 27,550 26,160 24,730

A_ _ _ _-402NA---STFCH5 1 870 0.94 17,077 14,400 11,370 4,670

A_ _ _ _-406PA---STFCI5 11⁄2 870 1.30 17,792 16,020 13,880 10,700 7,270 5,410 3,940

A_ _ _ _-403-L---STFCJ5 2 870 2.20 20,400 19,080 17,630 16,050 14,030 8,650 6,000 4,800

A_ _ _ _-404-W---STFCK5 3 870 3.50 25,200 23,800 22,420 20,780 18,800 9,270 7,990 7,050

A_ _ _ _-406PA---STFCG6

⁄4 690 0.63 14,111 11,730 8,000 4,530

A_ _ _ _-403-L---STFCH6 1 690 1.00 16,250 14,400 12,400 9,300 4,350

A_ _ _ _-404-W---STFCI6 11⁄2 690 1.70 19,800 17,960 15,960 7,330 5,950

A_ _ _ _-442NC---STFCK3 3 1750 2.90 26,250 24,130 21,960 19,610 17,000 14,250 11,630 9,080 6,700

A_ _ _ _-442NE---STFCL3 5 1750 5.20 34,427 32,730 30,880 29,000 26,930 24,700 22,350 19,700 16,100 9,530

A_ _ _ _-442ND---STFCH4 1 1160 0.97 19,031 16,100 12,950 8,000

A_ _ _ _-442NB---STFCJ4 2 1160 2.20 25,400 22,800 20,100 16,970 11,400

A_ _ _ _-442NA---STFCK4 3 1160 3.50 30,103 27,550 25,300 23,000 20,540 16,600 9,200

A_ _ _ _-446PA---STFCL4 5 1160 5.50 31,323 30,200 28,800 27,630 26,170 24,700 23,050 21,000 17,000 13,300 10,800

A_ _ _ _-442NB---STFCH5 1 870 0.98 19,400 17,060 11,600 4,900

A_ _ _ _-442NA---STFCI5 11⁄2 870 1.50 22,733 19,500 16,550 11,600 5,700

A_ _ _ _-446-P---STFCJ5 2 870 2.30 23,223 21,570 19,770 17,700 14,150 11,080 8,950 7,210 5,500

A_ _ _ _-443-L---STFCK5 3 870 3.40 26,600 24,950 23,450 21,820 19,970 17,620 14,070 9,200 9,350

A_ _ _ _-444-W---STFCL5 5 870 5.50 33,230 31,700 30,150 28,400 26,400 24,270 12,400 11,170 10,050 7,450

A_ _ _ _-446-P---STFCH6 1 690 1.20 18,632 16,510 14,000 9,550 6,960

A_ _ _ _-443-L---STFCI6 11⁄2 690 1.60 20,570 18,730 16,670 14,060 7,730

A_ _ _ _-444-W---STFCK6 3 690 2.70 26,356 24,450 22,300 19,620 9,250 8,000 6,400

Rating Table – Series 01S, 01R, 02S, 02R

"G" (General Industrial) Duty construction available for models with shaded performance. "H" (Heavy Industrial) Duty construction available for all models.

*48" AA prop data AMCA Certified for the Series 02S and 02R fans only.

Bulletin A-1

09-AJ

www.hartzellfan.com

1 (800) 336-3267

Peak CFM @ STATIC PRESSURE

Size Model Code

Blade

Motor

Fan

Angle

HP RPM BHP 0"

/8"

/4"

/8"1/2"

/8"

/4"

/8"1"11/4"11/2"

A_ _ _ _-482NC---STFCJ4 --- 2 1160 2.20 27,871 24,930 22,200 19,050 15,270 9,970

A_ _ _ _-482NB---STFCK4 --- 3 1160 3.10 31,426 28,900 26,200 23,200 19,530 13,500 8,430

A_ _ _ _-482NA---STFCL4 --- 5 1160 5.40 35,612 34,550 33,130 30,660 28,000 24,650 19,470 12,500 9,520

A_ _ _ _-486-C---STFCM4 --- 71⁄2 1160 7.40 37,700 36,500 35,170 33,680 32,050 30,330 28,530 26,580 24,350 18,050 13,300

A_ _ _ _-484AA170STFCM4 17° 71⁄2 1160 8.04 39,093 37,670 36,195 34,510 32,550 30,510 28,487 26,295 18,343 15,199 8,820

A_ _ _ _-482NC---STFCH5 --- 1 870 1.00 20,779 17,060 12,800 6,100

48*

A_ _ _ _-482NA---STFCJ5 --- 2 870 2.20 26,709 24,930 21,600 16,950 8,870

A_ _ _ _-486-C---STFCK5 --- 3 870 3.30 28,600 27,130 25,150 22,800 20,200 17,200 13,200 9,970 7,700

A_ _ _ _-486AA142STFCK5 14.2° 3 870 3.12 27,642 26,114 24,430 22,640 20,700 18,750 16,115 12,800 10,140 6,950

A_ _ _ _-483-L---STFCL5 --- 5 870 5.00 32,700 31,530 29,730 27,800 25,800 23,230 14,830 12,170 10,500 6,800

A_ _ _ _-482NA---STFCH6 --- 1 690 1.10 21,183 18,470 12,900

A_ _ _ _-484AA160STFCI6 16° 11⁄2 690 1.58 22,320 19,744 16,427 12,406 6,750 ,691

A_ _ _ _-484AA200STFCJ6 20° 2 690 2.01 25,518 22,999 19,646 15,932 10,602 1,490

A_ _ _ _-486AA230STFCK6 23° 3 690 3.19 30,013 27,314 24,860 22,542 19,806 15,791 9,864 2,099

A_ _ _ _-542NB---STFCK4 --- 3 1160 2.90 34,300 31,060 27,450 22,850 16,200 11,600 7,200

A_ _ _ _-542NA---STFCL4 --- 5 1160 5.10 43,200 40,750 37,500 34,300 30,800 26,950 19,500 13,500 9,500

A_ _ _ _-542NC---STFCM4 --- 71⁄2 1160 7.10 48,500 46,050 43,200 40,250 37,000 33,350 28,750 18,400 13,000

A_ _ _ _-544BA090STFCN4 9° 10 1160 11.30 47,950 45,600 43,350 41,000 34,300 28,400 25,700 20,100

A_ _ _ _-542NA---STFCJ5 --- 2 870 2.10 32,700 28,800 24,330 18,550 10,000

A_ _ _ _-542NC---STFCK5 --- 3 870 3.20 36,500 32,950 28,900 24,000 13,200

A_ _ _ _-544BA110STFCL5 11° 5 870 5.50 38,800 35,850 32,650 24,500 18,000 12,050

A_ _ _ _-544BA165STFCM5 16.5° 71⁄2 870 8.20 46,930 44,200 41,470 38,530 28,600 19,000 14,150

A_ _ _ _-543-L---STFCM5 --- 71⁄2 870 8.40 48,785 47,000 45,000 43,000 40,900 38,750 36,000 32,150 20,450

A_ _ _ _-546BA175STFCN5 17.5° 10 870 11.00 51,770 49,550 47,250 44,550 40,570 28,480 21,950 17,900 16,200

A_ _ _ _-542NA---STFCH6 --- 1 690 1.00 25,700 20,500 12,500

A_ _ _ _-544BA080STFCJ6 8° 2 690 2.20 27,500 22,970 14,800

A_ _ _ _-544BA140STFCK6 14° 3 690 3.30 34,150 30,600 25,800 13,700

A_ _ _ _-544BA175STFCL6 17.5° 5 690 5.50 41,070 38,300 34,830 24,650 16,130

A_ _ _ _-602NB---STFCL4 --- 5 1160 5.20 46,750 44,050 41,100 36,200 31,450 26,100 20,500 14,700

A_ _ _ _-602NC---STFCM4 --- 71⁄2 1160 7.20 54,200 51,370 48,200 44,300 40,350 34,600 27,400 21,100 14,000

A_ _ _ _-602NA---STFCN4 --- 10 1160 9.80 61,820 58,600 55,300 52,300 49,100 45,400 40,900 34,300 24,700 15,900

A_ _ _ _-608-C---STFCP4 --- 20 1160 17.60 54,590 53,050 51,550 50,000 48,500 47,000 45,450 44,000 42,650 40,000 37,500

A_ _ _ _-602NB---STFCJ5 --- 2 870 2.20 35,100 31,370 25,350 17,970 10,600

A_ _ _ _-602NC---STFCK5 --- 3 870 3.00 40,520 36,850 31,270 24,150 14,850

A_ _ _ _-602BA150STFCL5 15° 5 870 5.60 49,900 45,630 41,430 36,600 30,650 14,850

A_ _ _ _-604BA130STFCM5 13° 7

⁄2 870 8.40 53,880 51,000 48,500 45,700 42,480 38,050 29,780 23,750

A_ _ _ _-608-C---STFCM5 --- 71⁄2 870 8.10 40,950 39,050 37,050 34,850 32,700 30,750 29,100 27,700 26,300 21,250 16,050

A_ _ _ _-604BA165STFCN5 16.5° 10 870 10.90 61,370 58,300 55,530 52,950 50,050 47,000 42,900 32,150 22,750

A_ _ _ _-603-L---STFCO5 --- 15 870 15.00 66,850 65,000 62,950 60,600 58,200 55,750 53,700 50,500 43,750 25,700 21,000

A_ _ _ _-606BA175STFCO5 17.5° 15 870 16.30 66,670 65,200 63,600 61,950 60,000 57,720 55,000 51,900 47,780 28,600

A_ _ _ _-604BA100STFCK6 10° 3 690 3.30 37,970 34,250 29,950 23,620 16,100

A_ _ _ _-604BA165STFCL6 16.5° 5 690 5.50 48,600 44,900 41,400 37,900 31,670 18,500 11,900

A_ _ _ _-603-L---STFCM6 --- 71⁄2 690 7.60 53,000 50,500 47,730 44,950 41,500 37,500 28,400 18,000 15,800

A_ _ _ _-606BA175STFCM6 17.5° 71⁄2 690 8.10 52,800 50,950 48,780 46,200 42,750 37,850 25,200

A_ _ _ _-724AA140STFCN5 14° 10 870 10.90 80,863 75,750 70,000 63,650 55,750 47,150 40,000 34,100 27,300

A_ _ _ _-724AA190STFCO5 19° 15 870 16.80 96,768 92,700 88,250 83,300 77,150 67,650 55,700 48,000 40,500 20,600

A_ _ _ _-724AA230STFCP5 23° 20 870 23.20

108,156 104,350 100,000

95,000 89,850 84,000 72,000 54,250 48,850 32,600

A_ _ _ _-724AA140STFCL6 14° 5 690 5.40 64,129 58,150 49,300 39,150 29,650 22,650

A_ _ _ _-724AA190STFCM6 19° 71⁄2 690 8.40 76,706 71,600 64,500 56,100 42,000 33,000 20,300

A_ _ _ _-724AA230STFCN6 23° 10 690 11.20 85,775 80,850 74,600 67,100 48,500 38,550 29,400

A_ _ _ _-724AA145STFCK7 14.5° 3 575 3.30 54,107 46,200 34,100 23,650 12,000

A_ _ _ _-724AA205STFCL7 20.5° 5 575 5.50 66,797 60,400 51,350 34,000. 22,350

Hartzell 02SH-28 Click Here for the Hartzell Series 02 Spec Sheet

Specifications and Main Features

Frequently Asked Questions

User Manual