Hartke PRO 1800 User Manual

Stackable
Bass Enclosure
with an impregnated fabric surround, and matched convex dust cover all mount-
well as a description of its front and rear panels, step-by-step instructions for its
technical support and so we can send you updated information about these and
We recommend you record your serial number in the space provided below for
future reference.
the unit will not be accepted. Please call Samson at 1-800-3SAMSON (1-800-
About Impedance
the total impedance is cut in half and when two speakers are wire in “Series” the total
The
impedance (many audio
your amplifier. In general, the lower the
fier will put out.
There is a minimum safe
your warranty.
The 1800 connections are made via
the speaker Input on the 1800ʼs rear
jackplate.
The 1800 provides both 1/4-inch and
with your amplifier.
Hartke Systems
Distributed Exclusively by Samson Technologies Corp. Hicksville, New York 11802
MODEL 2000 200 WATTS
8
= 120 WATTS
4
= 200 WATTS
CAUTION TO PREVENT SHOCK, DO NOT OPEN. NO USER SERVICE­ABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE TO RAIN OR MOISTURE.
ASSEMBLED IN R.O.K.
SERIAL NUMBER
115
~ AC INPUT
115V/230V 50/60Hz
FUSE
5A/250V, 180W (115V)
2.5A/250V, 450W (230V)
SPEAKER OUTPUTS
8
8
ON OFF
HPF
EFFECT
SEND
RETUIRN
Type Tuned, Vented Enclosure
Width: 24" (60.96 cm)
Depth: 18" (45.72 cm)
www.hartke.com
Loading...