Hartke HF44 Fuzz Owner's Manual

Description

Hartke’s HF44 Bass Fuzz Pedal features an
all-analog, FET design delivering the high-voltage
sound of a tube overdrive circuit. The Mid and
Tone controls allow you to dial in the harmonic
character while adding body and thickness to
your tone. The HF44 delivers the high-frequency
edge needed to drive all your aggressive riffs.

Features

• Compact, all-analog overdrive pedal for bass guitar

• FET circuitry provides high-gain, tube-like saturation

• Mid and Tone controls dial in harmonic
character and high-frequency edge

• Rugged, die cast design

For more information about the HF44 Bass Fuzz pedal
and the rest of our product line, visit hartke.com.

Controls

1. POWER In - Connect a 9V DC 300mA with

center negative

2. LEVEL Knob - Controls the amount of the

effected signal.

3. GAIN Knob - Adjusts the amount of

distortion and sustain.

4. MID Knob - Adjusts the mid frequency

response of the effected signal.

5. TONE Knob - Adjusts the high frequency

response of the effected signal. Turning
the knob clockwise brightens the sound.

6. INPUT - Connect the INPUT of the pedal

to your instrument output or some other
effects unit with a 1/4” mono phone plug

7. OUTPUT - Connect the OUTPUT of the

pedal to your guitar amplifier or the Input
of another effects unit.

8. On/Off Indicator - Lights when the effect is

enabled.

9. ON/OFF Switch - This footswitch is used to

turn effect on or off.

1

2 3

4

7

5

6

8

9