Hartke 410TP Owner's Manual
4 x10″ Stackable
Bass Enclosure
Hartke
SERIES
410TP Introduction and Features
Congratulations on purchasing the 410TP bass enclosure by Hartke! The
Transporter Series enclosures have been designed to provide excellent tone
with a fast attack, deep low-end and punchy output. The 410TP Features four
10”, proprietary low frequency drivers with specially designed aluminum cones,
large voice coils on Kapton formers, impregnated fabric surrounds, and matched
convex dust covers all mounted in a heavy- duty steel frame. Using heavy-duty
plywood construction, covered in rugged carpet with recessed, dual 1/4-inch
jack plate and ergonomic handle, the 410TP will provide reliable performance
from gig to gig and venue to venue.
In these pages, you’ll find a detailed description of the features of the 410TP ,
as well as a description of its front and rear panels, step-by-step instructions for
its setup and use and full specifications. You’ll also find a warranty card
enclosed—please don’t forget to fill it out and mail it in so that you can receive
online technical support and so we can send you updated information about
these and other Samson products in the future.
We recommend you record your serial number in the space provided below for
future reference.
Serial number:
Date of purchase:
Should your unit ever require servicing, a Return Authorization number (RA)
must be obtained before shipping your unit to Samson. Without this number, the
unit will not be accepted. Please call Samson at 1-800-3SAMSON (1-800-372-
6766) for a Return Authorization number prior to shipping your unit. Please
retain the original packing materials and if possible, return the unit in the original carton and packing materials.
410TP Features
•4 x 10 Inch heavy-duty Low
Frequency drivers
• 3/4" Plywood construction
•Tuned Front Port
• Perforated metal speaker grill
• Recessed handles
• Stacking corners
• Dual, parallel wired 1/4" jacks
• Covered in durable carpet
Loading...