Harsco Industrial MACH C750, MACH C900, MACH C1050 Installation & Owner's Manual
®
MACH® GAS-FIRED BOILER
C750 - C900 - C1050 OUTDOOR
BOILER GUIDE
This manual is to be used in conjunction with the
®
MACH
Model #:_______ Serial #:_____________________
Installation Date:
Harsco Industrial, Patterson-Kelley
100 Burson Street, East Stroudsburg, PA 18301
Telephone: 570.476.7261
Toll Free: 877.728.5351
Facsimile: 570.476.7247
www.harscopk.com
C750-C1050 Installation & Owner’s Manual.
C.S.A Design-Certified
Complies with ANSI Z21.13/CSA 4.9
Gas-Fired Low Pressure Steam and Hot Water Boilers
ASME Code, Section IV
Certified by Harsco Industrial, Patterson-Kelley
C.S.A Design-Certified
Complies with ANSI Z21.13/CSA 4.9
Gas-Fired Low Pressure Steam and Hot Water Boilers
___________________________________
MACH
Rev. 1.0 (11/17/2008)
C750-C1050 Outdoor Boilers
© 2007 Harsco Corporation
Printed: 3/18/2011
The information contained in this document is subject to change
without notice from Harsco Industrial, Patterson Kelley.
Harsco Industrial, Patterson-Kelley makes no warranty, of any
kind, with respect to this material, including, but not limited to
implied warranties of merchantability and fitness for a particular
T
ABLE OF CONTENTS
MACH® C750-C1050 Outdoor Boilers ................. 1
Table of Contents .................................................... 2
1 BOILER MODIFICATIONS ...................... 3
1.1 Completed Outdoor Boiler ................................ 3
1.2 Required Tools & Parts ..................................... 4
2 FIELD INSTALLED COMPONENTS ....... 5
2.1 Install Power Cord Seal .................................... 5
2.2 Gas Inlet Assembly ........................................... 5
2.3 PVC Air Inlet Pipe Assembly ............................ 6
2.4 Exhaust Vent Installation .................................. 7
2.4.1 Exhaust Vent System Installation ............... 7
2.4.2 Stainless Steel Exhaust System ................ 7
2.4.3 Stainless Steel Adapter .............................. 7
2.5 CPVC Exhaust Vent System ............................ 7
2.5.1 Stainless Steel Adapter for CPVC.............. 7
2.6 Hood Assembly ................................................. 8
2.7 Hood Support .................................................... 9
®
MACH
application. Harsco Industrial, PattersonKelley is not liable for errors appearing in
this guide or for incidental or consequential
damages occurring in connection with the
furnishing, performance or use of this
material.
C750-C1050 Outdoor Boilers
3 MAINTENANCE ..................................... 10
4 ASSEMBLY DRAWING ......................... 11
4.1 Assembly Drawing .......................................... 11
1 Boiler Modifications
1.1 COMPLETED OUTDOOR BOILER
MACH
®
C750-C1050 Outdoor Boilers
FRONT VIEW REAR VIEW
This boiler has been modified by the factory and shipped as an outdoor boiler; additional assembly is
required to complete the outdoor boiler. These additional assemblies are listed in this manual and the
®
MACH
C750-C1050 Installation & Owner’s Manual.
Be sure to identify your boiler and its specific installation requirements. It is essential to read, understand,
and follow the recommendations of this manual before installing, operating, or servicing this equipment.
Failure to do so could result in serious injury, death, and/or property damage.
3
®
MACH
C750-C1050 Outdoor Boilers
See this MACH
additional information. Incorrect installation may result in severe injury or death.
®
C750-C1050 Outdoor Boiler Manual & MACH® C750-C1050 Installation & Owner’s Manual for
Shut off and disconnect electric and gas before installing the MACH® Outdoor Boiler.
The boiler and these instructions is for outdoor use only. Do not install in any
enclosure. All exhaust venting and air intake must be outdoors. All installations of venting systems should be
done only by qualified venting systems personnel. Venting must be installed in accordance with vent system
manufacturer’s installation instructions and this manual. Installing a boiler or vent system using improper
installation methods or materials can result in serious injury or death due to fire or asphyxiation from carbon
monoxide or other poisonous gases. Breathing exhaust fumes may cause serious personal injury or death.
!
c
1998 HCS, Inc. 800-748-0241
WARNING
Improper use may
result in fire or injury.
Read instructions/safety
manual before installing,
operating or servicing boiler.
Reorder No. 6020-V2WHPK
See MACH® C750-C1050 Installation & Owner’s
Manual for specific safety requirements, warnings, installation requirements
and diagrams. These instructions are a supplemental document which should
be used in conjunction with the MACH
Manual for your specific MACH
®
Boiler. The boiler and these instructions is for
®
C750-C1050 Installation & Owner’s
outdoor use only. Incorrect installation may result in injury or death.
1.2 REQUIRED TOOLS & PARTS
The following tools are required for the installation of the MACH
®
MACH
Outdoor Boiler.
®
Outdoor Boiler loose parts on a new
Pipe wrench (for 1” pipe elbow).
Tape measure.
Cordless drill / screw driver..
Phillipshead driver / screwdiver
¼” socket driver for #6 self tapping screws.
Approved gas pipe sealant.(See section 2.2)
Small tube of 100% silicone.
Approved exhaust vent sealer. (See Section 2.3 / 2.4)
Approved PVC cleaner & solvent.
Customer Supplied Parts
Exhaust Adapter
Exhaust pipe
Seal tight connector
Waterproof conduit
4
Loading...