Harris Home Fires FERVA CORSAIR Installation And Operating Instructions Manual

1

Issued: March 2012 V1.2

Harris Home Fires
41 Braddon St
Addington
Christchurch 8024
New Zealand
Email [e-mail]

Proudly Manufactured By:

P O Box 4043
Christchurch 8140
New Zealand

Phone [phone]
Freephone 0800 3661796
Fax [phone]

CORSAIR

Specifications, Installation and

Operating Instructions for the

FERVA Corsair Solid Fuel Burner

KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE

USB

2

Contents

PAGE

Testing and Certification 2

Dimensions 3

Clearances & Hearth 4

Installation Instructions 5

Minimum Flue Height 6

Flue Installation Details 6

HeatSaver Flue Kit Installation Instructions 6

Operation Instructions Wood 7 & 8

Caring for your Fire 9

Consumables 10

Creosote Formation 10

Storage of Fuel 11

Useful Tips 11

TEG Operating Instructions 12

Trouble Shooting 13 & 14

Warranty Details 15

Testing and Certification

MODEL

AS/NZS

2918:2001

AS/NZ

2918:2001, APP E

AS/NZS

4012:1999

AS/NZS

4013:1999

ECan Cert

Number

Corsair Complies N/A 71% 0.65g/kg 121490

3

Dimensions

4

Minimum Safe Installation Clearances

to COMBUSTIBLE Materials

Important Information

Clearances are with the 900mm

high factory flue shield fitted

Minimum floor protector material is

8mm tiles or thermal equivalent

Dimensions are in mm

5

Installation Instructions

This appliance should only be installed by a trained and NZHHA qualified installer.

Warning: the appliance and flue system shall be installed in accordance with AS/NZS 2918 and the appropriate requirements of

relevant building code/codes.

Warning: appliances installed in accordance with this standard shall comply with the requirements of AS/NZS 4013 where required
by the regulatory authority, i.e. the appliance shall be identifiable by a compliance plate with the marking “Tested to AS/NZS 4013”.

Any modification of the appliance that has not been approved in writing by the testing authority is considered to be in breach of the
approval granted for compliance with AS/NZS 4013.

Caution: mixing of appliance or flue system components from different sources or modifying the dimensional specification of com­ponents may result in hazardous conditions. Where such action is considered, the manufacturer should be consulted in the first in­stance.

Caution: cracked and broken components e.g. glass panels or ceramic tiles, may render the installation unsafe.

 Maintain a clearance of at least 1 metre between front of the appliance and building structure or any other substantial im-

movable object.

 Your appliance shall be seismically restrained, including the floor protector using the provided holes or brackets. The re-

straints should be sufficient enough to resist a seismic loading equal to 0.4 times the mass of the appliance. We recommend a
minimum of 8mm dynabolts on concrete floors and 8mm coach screws for wooden floors of appropriate length.

Minimum Flue Height

The top of the flue system should be at least
600mm above the highest point of the roof
ridgeline, if the point of
intersection of the flue system and the roofline is
less than 3 metres from the ridgeline horizon­tally.

If the point of intersection of the flue system and
the roofline is greater than 3 metres horizontally,
the top of the flue system shall be at least 1 me­tre above the point of intersection with the roof­line. (refer FIG 3)

These are considered to be minimum dimensions, and depending on local conditions,

taller flue system heights may be required for satisfactory performance.

Flue Installation Detail

Your Woodsman appliance should be installed with a HeatSaver Flue System.

A HeatSaver Flue System is available from all authorised Woodsman dealers throughout New Zealand.

The HeatSaver Flue System contains a complete installation drawing and correct clearances from the ceil­ing level up. Minimum clearances from the appliance to nearby combustible surfaces are given in FIGS 1 &

2.

Use of a flue system other than a genuine HeatSaver Flue System may affect the safety of the installa­tion, and may affect your warranty.

Insist on a genuine HeatSaver Flue System.