How it Works
Harris
Loading...
XG-100P
Operator's Manual
112 pgs4.94 Mb0
Quick Manual
2 pgs1.17 Mb0
Table of contents
Loading...

Harris XG-100P Operator's Manual

Download
Operator’s Manual
10515-0372-4200
Rev. R, September 2015
UNITY® XG-100P
Full-Spectrum Multiband Radio
REV.
DATE
REASON FOR CHANGE
B
Mar/11
Added P25 Trunking and updated for R2.
C
Jul/11
Updated noise-cancelling information.
D
Sep/11
Updated accessories.
E
Oct/11
Updated accessories.
F
Nov/11
Updated accessories.
G
Mar/12
Updated to add new R3.0 features.
H
May/12
Updated accessories.
J
Oct/12
Updated to include R4A features.
K
Sep/13
Updated accessories. Update d cleaning procedure.
L
Feb/14
Added Type 99 and Global (accessory on ly) PTT.
M
Jun/14
Included DTMF, manual channel entry, protected keys, programmable A/B/C switch options, and Talk Around Indication.
N
Sep/14
Updated for XGP R4A – added Voice Annunciation.
P
Apr/15
Updated for XGP R5A.
R
Sep/15
Added HAZLOC verbiage.
This manual is published by
without any warranty. Improvements and changes to this manual necessitat ed by typographical errors,
inaccuracies of current information, or improvements to programs and/or equipment, may be made by
at any time and without notice. Such changes will be incorporated into new editions of this manual. No part of this manual may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording,
Copyright © 2009-2015 Harris Corporation.
MANUAL REVISION HISTORY
ACKNOWLEDGEMENT
This product was developed using GEOTRANS, a product of the National Geospatial Intelligence Agency and U.S. Army Engineering Research and Development Center. Use of this software does not indicate endorsement or approval of the product by the Secretary o f Defense or the National Geospatial Intelligence Agency.
This device made under license under one or more of the following US patents: 4,590,473; 4,636,791; 5,148,482; 5,185,796; 5,271,017; 5,377,229; 4,716,407; 4,972,460; 5,502,767; 5,146,697; 5,164,986; 5,185,795.
The Advanced Multi-Band Excitation implementation 2 (AMBE+2) voice coding Technology embodied in this product is protected by intellectual property rights including patent rights, copyrights and trade secrets of Digital Voice Systems, Inc. This voice coding Technology is licensed solely for use within this Communications Equipment. The user of this Technology is explicitly prohibited from attempting to extract, remove, decompile, reverse engineer, or disassemble the Object Code, or in any other way convert the Object Code into a human-readable form. U.S. Patent Nos. #5,870,405, #5,826,222, #5,754,974, #5,701,390, #5,715,365, #5,649,050, #5,630,011, #5,581,656, #5,517,511, #5,491,772, #5,247,579, #5,226,084 and #5,195,166.
CREDITS
Harris, Unity, VIDA, EDACS, NetworkFirst, and OpenSky are registered trademarks and TECHNOLOGY TO CONNECT, INFORM AND PROTECT is a trademark of Harris Corporation. Bluetooth is a registered trademark of Bluetooth SIG, Inc. Motorola is a registered trademark of Motorola, Inc. AMBE is a registered trademark and IMBE, AMBE+, and AMBE+2 are trademarks of Digital Voice Systems, Inc. All brand and product names are trademarks, registered trademarks, or service marks of their respective holders.
NOTICE!
The material contained herein is subject to U.S. export approval. No export or re-export is permitted without written approval from the U.S. Government. Rated: EAR99; in accordance with U.S. Dept. of Commerce regulations 15CFR774, Export Administration Regulations.
Information and descriptions contained herein are the property of Harris Corporation. Such information and descriptions may not be copied or reproduced by any means, or disseminated or distributed without the express prior written permission of Harris Corporation, PSPC Business, 221 Jefferson Ridge Parkway, Lynchburg, VA 24501.
Repairs to this equipment should be made only by an authorized service technician or facility designated by the supplier. Any repairs, alterations or substitutions of recommended parts made by the user to this equipment not approved by the manufacturer could void the user's authority to operate the equipment in addition to the manufacturer's warranty.
This product conforms to the European Union WEEE Directive 2012/19/EU. Do not dispose of this product in a public landfill. Take it to a recycling center at the end of its life.
Harris products comply with the Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment (RoHS) Directive.
Harris Corporation
2
Harris Corporation
for any purpose, without the express written permission of Harris Corporation.
10515-0372-4200, Rev. R
Section Page
3.21 GROUP CALLS ......................................................................................................................... 31
TABLE OF CONTENTS
1. REGULATORY AND SAFETY INFORMATION ............................................................................. 7
1.1 SAFETY SYMBOL CONVENTIONS ........................................................................................ 7
1.2 FCC INFORMATION .................................................................................................................. 8
2. INTRODUCTION .................................................................................................................................. 9
2.1 DESCRIPTION ............................................................................................................................ 9
2.2 STORAGE GUIDELINES ......................................................................................................... 10
2.3 BASIC SETUP ........................................................................................................................... 10
2.3.1 Assemble the Radio ....................................................................................................... 10
2.3.2 Removing the Battery .................................................................................................... 11
2.3.3 Removing the Optional Belt Clip .................................................................................. 11
2.4 CLEANING ................................................................................................................................ 11
3. BASIC OPERATION ........................................................................................................................... 13
3.1 XG-100P CONTROLS ............................................................................................................... 13
3.2 TOP DISPLAY ........................................................................................................................... 15
3.3 MAIN DISPLAY ........................................................................................................................ 15
3.4 STATUS MESSAGES ............................................................................................................... 17
3.5 MENU NAVIGATION .............................................................................................................. 18
3.6 BEFORE FIRST USE ................................................................................................................. 18
3.7 POWER ON AND SET VOLUME ............................................................................................ 19
3.8 NOISE CANCELLATION ......................................................................................................... 19
3.8.1 Enable Noise Cancellation ............................................................................................. 19
3.8.2 Using Noise Cancellation .............................................................................................. 20
3.8.3 The Effect of Distance from the Micropho ne ................................................................ 20
3.8.4 Primary versus Secondary Microphone ......................................................................... 21
3.8.5 When using an SCBA Mask .......................................................................................... 21
3.9 PTT OPTIONS ........................................................................................................................... 22
3.10 VOICE ANNUNCIATION ........................................................................................................ 22
3.11 SELECT CHANNEL AND BANK ............................................................................................ 22
3.11.1 Using Group/Channel Knob .......................................................................................... 22
3.11.2 Manually Enter Channel Number .................................................................................. 23
3.12 LOCK/UNLOC K KEYPAD ...................................................................................................... 23
3.13 TURN ENCRYPTION ON OR OFF .......................................................................................... 24
3.14 TRANSMIT ENABLE/DISABLE ............................................................................................. 25
3.15 USER INTERFACE PRIVILEGE LEVEL ................................................................................ 25
3.16 SELECT ZONE/SYSTEM USING MENUS ............................................................................. 26
3.17 CHANNEL GUARD (ANALOG CONVENTIONAL ONLY) ................................................. 26
3.18 USE TALKAROUND TO BYPASS REPEATER (ANALOG AND P25 CONVENTIONAL
ONLY) ................................
3.19 TYPE 99 OPERATION .............................................................................................................. 28
3.19.1 Enable/Disable Type 99 from Call Menu: ..................................................................... 29
3.19.2 Disable After PTT.......................................................................................................... 29
3.19.3 Auto Reset ..................................................................................................................... 29
3.20 INDIVIDUAL CALLS ............................................................................................................... 30
3.20.1 Transmit an Individual Call ........................................................................................... 30
3.20.2 Receiving an Individual Call ......................................................................................... 31
........................................................................................................ 27
3
3.21.1 Change Talkgroup ......................................................................................................... 31
4.7.3 Vote Scan (Analog and P25 Conventional Only) .......................................................... 62
3.21.2 Receive a Group Call ..................................................................................................... 32
3.22 CALL ALERT (PAGE) - P25 TRUNKED ONLY .................................................................... 33
3.22.1 Send Alert ...................................................................................................................... 33
3.22.2 Receive Alert ................................................................................................................. 33
3.23 TELEPHONE INTERCONNECT CALLS (P25 TRUNKED ONLY) ...................................... 34
3.24 DTMF ......................................................................................................................................... 34
3.25 START SCAN ............................................................................................................................ 34
3.26 STOP SCAN ............................................................................................................................... 35
3.27 MONITOR AND SQUELCH TYPES (CONVENTIONAL ONLY) ........................................ 36
3.28 NUISANCE DELETE ................................................................................................................ 37
3.29 VIEW GPS INFORMATION ..................................................................................................... 38
3.30 EMERGENCY OP ERATION .................................................................................................... 39
3.30.1 Declaring an Emergency Call ........................................................................................ 39
3.30.2 Receiving an Emergency Call ........................................................................................ 40
3.30.3 Stealth Emergency ......................................................................................................... 40
3.31 ENCRYPTION BAR .................................................................................................................. 40
3.32 OTAR SCREENS ....................................................................................................................... 41
3.33 MDC-1200 (CONVENTIONAL ONLY) ................................................................................... 41
3.33.1 Normal PTT Operation .................................................................................................. 41
3.33.2 MDC PTT ID Receive Handling ................................................................................... 41
3.33.3 Emergency Declaration ................................................................................................. 41
3.34 SHORTCUT ME NU................................................................................................................... 42
4. ADVANCED OPERATIONS .............................................................................................................. 43
4.1 CONFIGURING ENCRYPTION ............................................................................................... 43
4.1.1 Create Keys using Harris Key Admin ........................................................................... 43
4.1.2 Load Keys ...................................................................................................................... 43
4.1.3 Zeroize All from Radio .................................................................................................. 45
4.1.4 Protected keys ................................................................................................................ 46
4.1.5 Global Encryption .......................................................................................................... 46
4.1.6 Select Keyset ................................................................................................................. 47
4.1.7 View Key List ................................................................................................................ 48
4.1.8 OTAR Configuration ..................................................................................................... 48
4.2 ACTIVATE/VIEW MISSION PLAN ........................................................................................ 49
4.3 SITUATIONAL AWARENESS (SA) – P25 CONVENT IONAL ONLY ................................. 50
4.4 USER-DEFINED ZONES/SYSTEMS ....................................................................................... 51
4.4.1 Command Tactical Zone ................................................................................................
4.4.2 Mixed System Zone ....................................................................................................... 52
4.5 CH INFO MENU ........................................................................................................................ 53
4.6 SETTINGS MENU ..................................................................................................................... 54
4.6.1 Audio Settings ............................................................................................................... 55
4.6.2 Display Settings ............................................................................................................. 56
4.6.3 GPS Settings .................................................................................................................. 57
4.6.4 Bluetooth........................................................................................................................ 57
4.6.5 Clock Settings ................................................................................................................ 60
4.6.6 Battery Settings .............................................................................................................. 60
4.7 SET UP SCAN ........................................................................................................................... 61
4.7.1 Home, Priority 1, and Priority 2 Channels ..................................................................... 61
4.7.2 Trunked/Conventional Scanning ................................................................................... 62
51
4
10515-0372-4200, Rev. R
4.7.4 Edit Scan List ................................................................................................................. 63
4.7.5 Set or Remove Priority 1 and Priority 2 Channels ......................................................... 63
4.7.6 Custom Scan Lists ......................................................................................................... 64
4.7.7 Wide Area System Scan (P25 Trunked Only) ............................................................... 66
4.8 MESSAGE MENU ..................................................................................................................... 67
4.8.1 Radio Status ................................................................................................................... 67
4.8.2 Radio Message ............................................................................................................... 67
4.8.3 Radio TextLink (P25 Trunked Only)............................................................................. 68
4.8.4 Faults/Alerts ................................................................................................................... 70
4.9 UTILITY MENU ........................................................................................................................ 72
4.10 PPP/SLIP .................................................................................................................................... 74
5. PROGRAMMING ................................................................................................................................ 75
5.1 PROGRAMMING VIA RPM .................................................................................................... 75
5.2 BLUETOOTH CLONING ......................................................................................................... 75
5.3 EDIT CHANNEL (CONVENTIONAL ONLY) ........................................................................ 76
5.4 OTAP (P25 TRUNKED ONLY) ................................................................................................ 79
5.5 PROGRAMMABLE BUTTONS AND SWITCHES ................................................................. 80
5.5.1 Programmable Buttons .................................................................................................. 80
5.5.2 Programmable Ø/O Switch ............................................................................................ 81
5.5.3 Programmable A/B/C Switch ........................................................................................ 81
6. REFERENCE ........................................................................................................................................ 84
6.1 MARINE FREQUENCIES......................................................................................................... 84
6.2 NARROWBANDING ................................................................................................................ 89
6.3 OPTIONS AND ACCESSORIES .............................................................................................. 90
7. GLOSSARY .......................................................................................................................................... 92
8. BASIC TROUBLESHOOTING .......................................................................................................... 95
8.1 ERROR MESSAGES ................................................................................................................. 95
8.2 OTAR ERRORS/INFORMATION ............................................................................................ 96
9. TECHNICAL ASSISTANCE .............................................................................................................. 97
10. WARRANTY ........................................................................................................................................ 98
5
LIST OF FIGURES
Page
Figure 2-1: Radio Assembly .......................................................................................................................... 10
LIST OF TABLES
Page
Table 3-1: XG-100P Controls, Indicators, and Connectors ........................................................................... 13
Figure 2-2: Remove the Battery ..................................................................................................................... 11
Figure 2-3: Remove Belt Clip ........................................................................................................................ 11
Figure 3-1: XG-100P Controls ....................................................................................................................... 13
Figure 3-2: Top Display ................................................................................................................................. 15
Figure 3-3: Main Display ............................................................................................................................... 15
Figure 3-4: Enable Noise Cancellation .......................................................................................................... 19
Figure 3-5: Using the Noise Cancellation Feature ......................................................................................... 20
Figure 3-6: Without a Speaker Microphone Attached ................................................................................... 21
Figure 3-7: With a Speaker Microphone Attached ........................................................................................ 21
Figure 3-8: User Interface Privilege ............................................................................................................... 25
Figure 3-9: Unit ID ........................................................................................................................................ 32
Figure 3-10: Group ID ................................................................................................................................... 32
Table 3-2: Icons ............................................................................................................................................. 16
Table 3-3: Status Messages ............................................................................................................................ 17
Table 3-4: Encryption Bar Indications ........................................................................................................... 40
Table 3-5: OTAR Display Messages ............................................................................................................. 41
Table 4-1: Alert Tones ................................................................................................................................... 55
Table 5-1: Valid Frequencies ......................................................................................................................... 79
Table 6-1: Marine Frequencies ...................................................................................................................... 84
Table 6-2: Options and Accessories ............................................................................................................... 90
Harris Corporation, Public Safety and Professional Communications (PSPC) Business continually evaluates its technical publications for completeness, technical accuracy, and organization. You can assist in this process by submitting your comments and suggestions to the following:
Harris Corporation fax your comments to: 1-434-455-6851 PSPC Business or
Technical Publications e-mail us at: PSPC_TechPubs@harris.com 221 Jefferson Ridge Par kwa y Lynchburg, VA 24501
6
10515-0372-4200, Rev. R
WARNING
The WARNING symbol calls attention to a procedure, practice, or the like,
n personal injury.
CAUTION
which, if not performed correctly or adhered to, could result in a risk of danger,
NOTE
electrical hazard symbol is a WARNING indicating there may be an

1. REGULA T OR Y AND SAFETY INFORMA TION

1.1 SAFETY SYMBOL CONVENTIONS

The following conventions are used to alert the user to gen eral safety precautions that must be observed during all phases of operation, service, and repair of this product. Failure to comply with these precautions or with specific warnings elsewhere violates safety standards of design, manufacture, and intended use of the product. Harris assumes no liability for the customer's failure to comply with these standards.
which, if not correctly performed or adhered to , could result i Do not proceed beyond a WARNING symbol until the conditions identified are fully understood or met.
The CAUTION symbol calls attention to an operating procedure, practice, or the like,
damage to the equipment, or severely degrade the equipment performance.
The NOTE symbol calls attention to supplemental information, which may improve system performance or clarify a process or procedure.
The ESD symbol calls attention to procedures, practices, or the like, which could expose equipment to the effects of Electro-Static Discharg e. Proper precautions must be taken to prevent ESD when handling circuit modules.
The electrical shock hazard present.
7
WARNING

1.2 FCC INFORMATION

Before operating the XG-100P radio, read the safety and RF exposure guidelines contained in safety booklet, 10515-0372-4000, included with your radio.
The XG-100P has been tested and complies with the Federal Communications Commission (FCC) RF exposure limits for “Occupational Use Only.” In addition, this radio complies with the following Standards and Guidelines with regard t o RF energy and electromagnetic energ y levels and evaluation of such levels for exposure to humans:
FCC Office of Engineering and Technology (OET) Bulletin 65 Edition 97-01 Supplement C, Evaluating Compliance with FCC Guidelines for Human Exposure to Radio Frequency Electromagnetic Fields
American National Standards Institute (ANSI) (C95.1 – 1992), Institute of Electrical & Electronics Engineers (IEEE) Standard for Safety Levels with Respect to Human Exposure to Radio Frequency Electromagnetic Fields, 3 kHz to 300 GHz
American National Standards Institute (C95.3 – 1992), IEEE Recommended Practice for the Measurement of Potentially Hazardous Electromagnetic Fields – RF and Microwave
8
10515-0372-4200, Rev. R
the Software Release Notes to determine the minimum software versions
NOTE

2. INTRODUCTION

2.1 DESCRIPTION

Your XG-100P provides full-spectrum multiband coverage:
• 136 to 174 MHz, VHF, 1 watt, 2 watts, 3 watts, 6 watts output
• 380 to 520 MHz, UHF-Low, UHF-High, 1 watt, 2 watts, 3 watts, 5 watts output
• 762 to 870 MHz, 700/800 bands, 0.5 watt, 1 watt, 2 watts, 3 watts output The XG-100P includes the following capabilities:
Project 25 (P25) Conventional P25 Trunking Analog FM Advanced Encryption Standard, 256-bit (AES-256) Digital Encryption Standard Output Feedback
(DES-OFB) Encryption Vote Scan Global Positioning System (GPS) Bluetooth® Over The Air Rekey (OTAR) Preemptive Priority Scanning Global Common Key References (CKR) Smart Battery status and reporting P25 Conventional Situational Awareness Command Tactical Zone External Data (PPP/SLIP) Conventional Operator Selectable Tones P25 Trunked/Conventional Scan TX Disable P25 Conventional Emergency Alarm P25Trunked/Conventional Stealth Emergency P25 Trunked Radio TextLink P25 Trunked Status/Message P25 Trunked Telephone Interconnect P25 Trunked Call Alert Minimum Volume Programmable Shortcut Menu Custom Scan Lists Keypad Tones Power Up PIN Entry Two-Button Emergency Clear OTAP (Profile) - P25T Only Mission Plan Cloning via Bluetooth Multiple Mixed Systems/Zones MDC-1200 Receive Support KVL-4000 Support Bluetooth Speaker/Mic Support Enhanced Backlight Options
Digital Encryption Standard Cipher Feedback (DES-CFB) Encryption
Enhanced Programmable Button Options Feature Management Voice Annunciation
For optional accessories, refer to 6.3. Additional accessories may have been added since pub lication of this manual; contact Harris for more informat i on.
Refer to required for features.
Additional Programmable Options for Two Position Switch
9
WARNING
CAUTION

2.2 STORAGE GUIDELINES

Store your XG-100P and batteries in a clean, cool (not exceeding 86 °F [+30 °C]), dry, and ventilated storage area.

2.3 BASIC SETUP

2.3.1 Assemble the Radio

Only use a Harris charger approved for the battery chemistry. Injury could occur from improper charger use.
Do not over-tighten the antenna as damage could result.
1. Make sure batteries are charged per char ger manual 10515-0372-4010 (supplied with the charger).
2. To attach optional belt clip, remove the existing tab from the back of the radio above the battery
compartment. Slide the belt clip into the groove.
3. Lift clip, if installed, and slide top of battery into top of battery compartment at the rear of the radio.
4. Press down on bottom side of battery until it snaps into place.
5. Radio may need to be set for battery type (refer to Section 4.6.6).
10
Figure 2-1: Radio Assembly
10515-0372-4200, Rev. R

2.3.2 Removing the Battery

To remove, press and hold tab, lift battery clip, then pull battery up and out of the radio.
Figure 2-2: Remove the Battery

2.3.3 Removing the Optional Belt Clip

Remove the battery before removing the belt clip. To remove the belt clip, press and hold the tab towards the top of the battery compartment and slide the belt clip out of the groove in the back of the radio.

2.4 CLEANING

Keep the exterior of the radio, battery, antenna, and radio accessories clean.
Periodically clean using the following procedures:
1. To remove dust and dirt, clean using damp clean cloth (warm water and mild detergent soap).
2. Follow by wiping with damp (warm water) clean cl oth. Wipe dry with clean cloth.
3. Remove the battery and wipe the battery and radio contacts using a soft dry cloth to remove dirt or
grease. This will ensure efficient power tran sf er from the battery to the radio.
4. Remove any accessories and clean the accessori es Universal Device Connecto r (UDC) contacts u sing
a clean dry cloth. When the UDC is not in use, cover the connector with the protective dust cap to prevent the build-up of dust or water particles.
5. If the radio is used in a harsh envi ronment (such as d riving rain, salt fog , etc.), it may b e necessary t o
periodically dry and clean the battery and radio contacts with a soft dry cloth or soft-bristle non­metallic brush.
Figure 2-3: Remove Belt Clip
11
CAUTION
NOTE
For more rigorous cleaning, use the foll owing procedure:
Do not use chemical cleaners, spray, or petroleum-based products. They may damage the radio housing. We recommend using Chemtronics® Electro-Wash® PR (ES-1603) or equivalent.
1. Apply the cleaning solution to a clean damp cloth and clean the radio.
Do not spray cleaning solution directly on radio. To clean the radio in the speaker and microphone areas, carefully wipe these areas but prevent the cleaning solution from entering the speaker or microphone openings.
2. Wipe off the radio with clean damp cloth using mild warm soapy water.
3. Follow up by wiping off the radio with clean damp cloth using warm water only.
4. Wipe dry with clean cloth.
12
10515-0372-4200, Rev. R
KEY
CONTROL/INDICATOR
FUNCTION
1
Channel/Group Knob
Used to select one of 16 channels/groups.
Turn clockwise to power on radio and increase volume of audio heard in speaker. Minimum volume setting.
3
Programmable Switch
Can be programmed for multiple functions (see Section 5.5.2 for details).
When noise cancellation is enabled, the rear and front microphones are used together to
3.8 for detailed information on using noise cancellation.
Prior to XGP R3A, selects one of three channel banks: A, B, or C (Section 3.9).
RPM R10B or later. See Section 5.5.3 for details.
User-Programmable
Button (Top Side)
Used to select a commonly used function as an alternative to navigating menus. This is configured via programming u sing RPM.

3. BASIC OPERATION

3.1 XG-100P CONTROLS

2 Power/Volume Knob
4 Microphone (Rear)
5 A/B/C Switch
6
Figure 3-1: XG-100P Controls
Table 3-1: XG-100P Controls, Indicators, and Connectors
volume levels may be programmed into t he radio to prevent missed calls due to a low
form a dual microphone system. Nois e cancellation improves the quality of transmitted voice. When noise cancellation is disabled, only the front microphone is used. See Section
In XGP R3A and later, the A/B/C switch can be programmed for multiple functions using
13
KEY
CONTROL/INDICATOR
FUNCTION
Push-To-Talk (PTT)
Button
Press to transmit. Make sure Push-To-Talk (PTT) is enabled (Section 4.6.1).
User-Programmable Button (Middle Side)
Used to select a commonly used function as an alternative to navigating menus. This is configured via programming u sing RPM.
User-Programmable
Button (Bottom Side)
Used to select a commonly used function as an alternative to navigating menus. This is configured via programming u sing RPM.
10
Battery
Battery - Refer to Section 2.3 for battery connection and removal.
11
Antenna Connector
Provides Subminiature version A (SMA) antenna connector.
Used to place radio in emergency mode (see Section 3.30). This button can be disabled Programmable Button to Clear E mergencies if configured to do so.
Indicates radio status.
Orange = actively transmitting encrypted.
Top display shows summary of stat us such as channel, battery, scanning, and emergency (Section 4.6.2).
Radio speaker which can be muted (Section 4.6.1). Volume can be adjusted using the Power/Volum e knob.
When noise cancellation is enabled, the rear and front microphones are used together to
3.8 for detailed information on using noise cancellation.
17
Front Display
Front display shows complete stat us and radio menus.
Displays the current function associated with the corresponding soft key located directly below each option on the keypad (Section 3.5).
Dynamic keys that have their current function labeled in text directly above each butt on (Section 3.5).
Used to select the current menu or option that is highlighted by the navigator. Also us ed to access the shortcut menu from the main screen (Section 3.34).
Provides up, down, left, and right menu navigation. Also used for select and shortcut menu navigation.
Used to enter text or numbers, and to quickly access menus.
also acts as a home key to quickly navigate back to the main screen.
7
8
9
12 Emergency Button
Indicator Light Emitting
13
14 Top Display
15 Speaker
16 Microphone (Front)
18 Soft-Key Displays
19 Soft Keys
20 Select/Shortcut Button
Diode (LED)
via programming using RPM. In addit ion, this button can be used in conjunction with a User
Red = actively transmitting. Green = actively receiving.
status. Display orientation can be configured for viewing from the front or rear of the radio
form a dual microphone system. Nois e cancellation improves the quality of transmit ted voice. When noise cancellation is disabled, only the front microphone is used. See Section
21 Navigator
22 Keypad
14
10515-0372-4200, Rev. R
* Harris logo displays if GPS has not acquired afte r power up.
See Table 3-2 for a description of the icons displayed in the status area.
See Table 3-3 for the complete list of messages displayed by the radio.
Encryption status and individual call stat us are displayed here. See Sections

3.2 TOP DISPLAY

The top display shows a summary of statu s, such as channel number, channel short name, system short name, battery, scanning, and emergency mode. The display can be configured for viewing from the front or rear of the radio (see Section 4.6.2). Channel short name and zone/system short name are programmed in RPM.

3.3 MAIN DISPLAY

The main display appears after power up or after exiting from the menus. The XG-100P also contains an icon glossary in the Utility Menu (see Section 4.9).
Figure 3-2: Top Display
3.31 and 3.19 for more information.
Figure 3-3: Main Display
15
ICON
DESCRIPTION
ICON
DESCRIPTION
ICON
DESCRIPTION
Battery Level
100% Capacity
Battery Level
75% Capacity
Battery Level
50% Capacity
Battery Level
25% Capacity
Battery Level
(Low Battery Audio Indicator)
Battery Level
(RX-Only State)
Conventional Site
Unregistered
Conventional Site
Registered
** Smart Battery Only
Table 3-2: Icons
Trunked Signal Strength
TX Power
Receive Signal Strength
Channel Idle
Transmitting Encrypted
TX Disabled
Tones Disabled
PTT Disabled
5% Capacity
Bluetooth On
Bluetooth Connected
Secure Traffic
Global Encryption
OTAR Disabled
OTAR Registered
OTAR Registering
OTAR Rekeying
Talkaround Enabled
Transmit Power Level
RX Only
GPS Tracking
Noise Cancellation Enabled
Monitor On
VDOC
Failsoft
Receiving Data
Transmitting Data
Virtual Site
Alert(s) Present
Vote Scanning
Scanning Enabled
Emergency
RX Mail
Battery Exhausted
Battery Charging**
Battery Fully Charged**
Speaker Muted
Unit Unselected
Unit Selected
Unselected Unit in Emergency
Selected Unit in Emergency
Nuisance Channel
Type 99 Enabled
16
10515-0372-4200, Rev. R
MESSAGE
DESCRIPTION

3.4 STATUS MESSAGES

During radio operation, various radio Status Messages may be displayed. The messages are described below.
Table 3-3: Status Messages
PTT DENIED CALL QUEUED P25 Trunked only - Indicates the system has placed the call in a reques t queue.
SYSTEM BUSY
SCANNING Indicates the radio is scanning. TX EMERGENCY P25 modes only - Indicates an emerge ncy call is being transmitted.
RX EMERGENCY
WIDE AREA SCAN
INVALID TALKGROUP INVALID UNIT P25 Trunked only - Indicates the current unit is not valid for the current system. REGISTERING
CTRL CHANNEL SCAN
BAND SCANNING
PROFILE SUCCESSFUL
OTAR REKEYING OTAR Rek ey operation is in progress. OTAR REKEY
COMPLETE
P25 Trunked only - Indicates the rad i o or talkgroup is not authorized to operate on the selected system and/or talkgroup.
P25 Trunked only - Indicates the s ystem is busy, no channels are currently available, the queue is full, or an individual call is being attempted to a radio that is currently transmitting.
P25 modes only - Indicates an emergency call is being received. If programmed via RPM, radio will display the unit name or unit ID.
P25 Trunked only - Indicates the rad i o has entered the Wide Area Scan mode to search for a new system (if enabled through programming).
P25 Trunked only - Indicates the curr ent talkgroup is not valid for the current system. This could happen if the site denies regist r ation due to an unrecognized talkgroup ID.
P25 Trunked only - Displayed when the radio is performing a registration/affiliation on a P25 trunking site.
P25 Trunked only - Indicates the control channel is lost and the radio has entered the Control Channel Scan mode to search f or the control channel (usually out of range indication). The length of time befor e the radio enters CC Scan after losing communication with the Control Channel is configurable in RPM.
P25 Trunked only - This message is onl y displayed if the P25T system is configured for "EnhancedCC" mode of operation. When the radio cannot find a Control Channel in eithe r the trunked frequency set or the list of di s covered adjacencies, the radio is able to perform a full spectrum frequency scan to f i nd a new Control Channel.
P25 Trunked only - A new mission plan was written to the radio by ProFile Manager and activated.
OTAR Rekey operation completed successfully.
17
Press while in any menu to return to the main display.
PRESS FOR MENU
PRESS FOR CH INFO

KEYPAD 1 DIRECT ACCESS (EXAMPLE: PRESS 4 FOR ZONE)
PRESS 

3.5 MENU NAVIGATION

MAIN
DISPLAY
MAIN
MENU
SUBMENU

3.6 BEFORE FIRST USE

Make sure XG-100P has:
• Fully charged battery
PRESS
THEN SELECT
-9 CAN ALSO BE USED FOR
• Antenna attached
• Mission plan and radio programmed using the RPM
• Encryption keys loaded if using encrypted channels
• Mission plan activated
18
10515-0372-4200, Rev. R
NOTE
NOTE

3.7 POWER ON AND SET VOLUME

The power switch and volume control are the same knob on top of the radio (see Figure 3-1).
1. Turn clockwise to power on XG-100P.
2. Set to desired volume level.
Minimum volume levels may be programmed into the radio to prevent missed calls due to a low volume setting.
The radio can be programmed to require the entry of a PIN in order to operate the radio. Check with your System Administrator if you forget your PIN. As the PIN is entered, an asterisk is displayed for each digit. The actual value is not displayed.

3.8 NOISE CANCELLATION

The XG-100P features Harris’ prop rietary noise suppression capability to provide clear and crisp voice quality in high-noise environments. This can be used in any mode, including analog and digital communications.
The XG-100P has two microphones; one located on the front (primary) and one on the rear (secondary). The primary microphone operates in exactly the same manner as a normal radio and is the one you talk into. The secondary microphone is used to pick up the surrounding noise when noise cancellation is turned on.
In the case where noise cancellation is enabled and a speaker microphone is attached to the XG-100P, talk into the speaker microphone. In this mode, XG-100P front microphone is used to pick up the surrounding noise, and the rear microphone is unused. See Section 3.8.4 for more information. If the secondary microphone is blocked, the XG-100P operates as though noise cancellation is turned off.

3.8.1 Enable Noise Cancellation

To enable Noise Cancellation:
1. Select MENU
2. Highlight and enable NOISE CANCELLATION using .
SETTINGS AUDIO SETTINGS.
Figure 3-4: Enable Noise Cancellation
Refer to Section 4.6.1 for more information on the Audio Settings menu.
19

3.8.2 Using Noise Cancellation

When using the noise cancellation feature, observe the following:
• Verify NOISE CANCELLATION is enab led (see Section 3.8.1).
• Ensure the primary and secondary microphones are not covered. See Section 3.8.4 for more
information on the primary and secondary microphones.
• Talk within two (2) inches of primary micropho ne (see Figure 3-5).
• Speak clearly, loudly, and with authority.
• If possible, face the noise source when talking into the radio (see Figure 3-5).
• In very noisy environments, it is o.k. to yell into the radio. The radio can handle very loud input
levels.
Figure 3-5: Using the Noise Cancellation Feature

3.8.3 The Effect of Distance from the Microphone

Unlike a normal microphone system, noise cancellation makes the level of your voice diminish quickly as you move away from the radio. In essence, the radio starts to see your voice as surrounding noise. Whereas, you may be comfortable speaking up to a foot away under normal operation, noise cancellation requires that you hold the radio close.
20
10515-0372-4200, Rev. R

3.8.4 Primary versus Secondary Microphone

3.8.4.1 Without a Speaker Microphone Attached
The primary microphone is located on the front of the radio and the secondary is on the back of the radio. See Figure 3-6 for the location of these microphones.
Figure 3-6: Without a Speaker Microphone Attached
3.8.4.2 With a Speaker Microphone Attached
When a speaker microphone is attached, the radio electronically switches over to use the radio’ s front microphone as secondary. The microphone on the attached speaker microphone becomes primary (see Figure 3-7).
Figure 3-7: With a Speaker Microphone Attached

3.8.5 When using an SCBA Mask

When using the SCBA mask, the primary microphone can be held directly against the voice port. If the SCBA has a voice amplifier, the same rule appli es. En sur e that the seco nd ary microp h on e is unco vered . If possible, point the secondary microphone toward the noise source.
21
The Bluetooth Speaker/Mic is unaffected by this setting. PTTing the Bluetooth
NOTE

3.9 PTT OPTIONS

The radio can be programmed via RPM with one of the following PTT options:
• Radio and Accessory – In this mode, when the radio is PTT’d the audio source will correspond with
the PTT source.
If the source of PTT is radio, the audio is routed via the radio microphone. If the source of PTT is an external microphone accessory, the audio is routed via the external
microphone accessory.
• Accessory Only - Any PTT input will have the audio routed through the external microphone
accessory.
Speaker/Mic always results in audio being routed via the Bletooth Speaker Mic.

3.10 VOICE ANNUNCIATION

When enabled via programming, the Voice Annunciation feature provides audible feedback for various radio operations. The radio can be programmed to play an audio message for any or all of the following. This message can be a pre-recorded (canned) message or a user-recorded message.
• Zone changes
• Channel changes
• System changes
• Encryption On/Off
• Noise Cancellation On/Off
• Scan On/Off
• Talkaround On/Off
For more information on configuring the radio for Voice Annunciation, refer to the Voice Annunciation Feature manual 14221-7200-6110.

3.11 SELECT CHANNEL AND BANK

3.11.1 Using Group/Channel Knob

The XG-100P can be programmed with 1000 channels per sy stem, with 16 channels in each of th e three banks.
• Bank A - Channel A1 - A16
• Bank B - Channel B1 - B16
• Bank C - Channel C1 - C16 Use the group/channel knob to select group/channel 1 – 16. Use the bank selecto r to set bank.
The selected bank is indicated on the displ ay.
22
10515-0372-4200, Rev. R
knob position (in other words, subsequent
If programmed for keypad lock/unlock, use :
Ø – Locks the keypad.
O – Unlocks the keypad.
NOTE
NOTE
NOTE
If your system has more than 48 channels, the SEL CHAN/GRP option available from the shortcut menu, allows you to select a channel group with channels 49-96, 97-144, etc. See Section 3.34 for more information.

3.11.2 Manually Enter Channel Number

To manually enter a channel using the radio keypad:
1. Select CHANNEL ENTRY from the Shortcut Menu (this menu option must be programmed to the
shortcut menu using RPM R10B or later).
2. Enter the channel number. You can enter raw numeric index or bank letter and channel number (e.g.,
B18 and 66 will both select channel 66). To enter the bank letter, press while the cursor is o n the first digit to cycle through 2/A/B/C.
Entering a number greater than the maximum numb er of entries in the selected zone will select the last channel. From the radio’s perspective, channels entered in this manner are not treated any differently from channels selected by the channel knob; for example, the scan list will be adjusted to add the channel (and make it P1 if applicable), emergencies will go out on the entered channel, etc.
Physically moving the channel knob or changing the system causes the radio to select the channel indicated by the channel channel changes are not made with respect to the manually entered channel).

3.12 LOCK/UNLOCK KEYPAD

The A/B/C switch can be programmed to lock/unlock the keypad (req uires XGP R3A or later and RPM R10B or later).
Or
Or
Lock or unlock the keypad via the shortcut menu (Section 3.34). Use to unlock keypad. Make sure the exact sequence of ◄, ►, ▲, and ▼is used. P ower cycling the radio will not unlock the keypad unless RPM setting for Power Up Options is enabled.
See Table 3-1 for the various options that can be programmed to the switch.
23
If programmed for encryption, use to set encryption:
Ø – Secure (Encryption Enabled)
O – Clear (Encryption Disabled)
and enable/disable encryption. This option is grayed out if
, or if Encryption Mode in the radio’s
NOTE

3.13 TURN ENCRYPTION ON OR OFF

See Table 3-1 for the various options that can be programmed to the switch.
Or
Turn encryption on or off via the Security Menu:
1. At main display, press to access the main menu.
2. Use to highlight and select SECURITY, or press .
3. Use to highlight
is programmed for encryption
personality is programmed “Forced On.”
• If a channel is programmed to be encrypted, a key icon appears on the main display when encryption
is enabled. The system must also be programmed to be encrypted.
• When encryption is turned on and you use any channel not configured for encryption, the radio allows
PTT. The signal is transmitted unencrypted.
• Systems configured for Global Encryption (enabled in the Security menu) will display a Global
Encryption icon instead of a key icon (Section 4.1.4).
24
10515-0372-4200, Rev. R
If enabled via programming, use to enable o r disable transmit:
Ø – Transmit Disabled
O – Transmit Enabled
FULL
ACCESS
LIMITED ACCESS
RESTRICTED
ACCESS
Audio Settings
GPS Settings
Clock Settings
Battery Setting
Bluetooth Settings
View Scan List
Edit Scan List
Zeroize
Keyset Changeover
Global Encryption
Global Key
Program Menu only in Active Mission Plan
Self-test on Utility Menu
TCXO Tuning on Utility Menu
P25 Test Selection on Utility Menu
Command Tactical Zone
NOTE

3.14 TRANSMIT ENABLE/DISABLE

When transmit is disabled, all forms of transmission from the radio are disabled, including Bluetooth. This is designed for use in explosive atmosph er es.
See Table 3-1 for the various options that can be programmed to the switch.

3.15 USER INTERFACE PRIVILEGE LEVEL

Depending on radio programming, some of the menu options described in this manual may not be available. The following table details the menus available for the different levels of User Interface Privilege:
Figure 3-8: User Interface Privilege
25
1. At main display, press to select MENU.
1. At main display, use to select MENU.
NOTE

3.16 SELECT ZONE/SYSTEM USING MENUS

A zone/system is a group of channels that can be programmed by agency or geographical region. For example, a system could be for fire, police, New York, Los Angeles, etc.
2. Use to highlight and select ZONE, or press .
A mission plan can have up to 512 systems, independent of banks or channels.
3. Use to view zone/system. indicates the active zone/system.
4. Use to highlight and select zone/system.
If VIEW ZONE is selected, a screen appears allowing you to view the channels in the zone/system.
5. Use to scroll through the zones/systems.
6. Use to select highlighted zone/system. New zone/system appears.

3.17 CHANNEL GUARD (ANALOG CONVENTI ONAL ONLY)

Channel Guard is Harris’s trademark for CTCSS (tone squelch) and CDCSS (digital tone squelch).
The Channel Guard menu is only accessible if the System is setup for CG SEL in the radio’s personality.
To select the Channel Guard tone:
2. Use to highlight and select CALL, or press .
26
10515-0372-4200, Rev. R
1. At main display, press to select MENU.
3. Use to highlight and select CHANNEL GUARD.
4. Use to highlight and select RECEIVE GUARD or TRANSMIT
GUARD.
5. Use to highlight and select the desired option from the list.
6. The Channel Guard frequency is displayed on the main display. The Channel Info screen and Channel Edit screen will change depending
on this selection. See Sections 4.5 and 5.2 for more information.

3.18 USE TALKAROUND TO BYPASS REPEATER (ANALOG AND P25 CONVENTIONAL ONLY)

You can bypass the repeater system to co mmunicate directly with other rad ios on your current channel’ s receive frequency. This is useful if you are out of range of a repeater or if a repeater is busy. You will need to be in range of the other radio.
2. Use to highlight and select CALL, or press .
3. Use to change TALKAROUND MODE to ENABLED.
27
now made on the receive
If programmed for Talkaround enable/disable, use :
Ø – Enables Talkaround.
O – Disables Talkaround.
for each
NOTE
NOTE
NOTE
4. The Talkaround icon appears. Calls are
frequency until you disable talkaround mode via the CALL menu. Power cycling the radio does not disable talkaround.
Or
See Table 3-1 for the various options that can be programmed to the switch.
If the Talk-Around Indication feature is enabled in RPM, the radio will play a unique grant tone when a call is placed on a simplex channel or when Talk-Around has been enabled on a duplex channel. This feature applies to both Analog and P25 Conventional systems. It optionally allows the radio to also play the same tone when it receives a call while o perating in simplex or Talk-Around. If configured, the radio
plays the tone at the selected volume level.
The tone will not play on systems configured with MDC.
Talk-Around Indication can be specified for each individual Analog and P25 Conventional system configured in personality. The following options can be selected, and apply only when the radio is on a simplex channel or when Talk-Around has been enabled by the user:
• Disabled: (This is the default option.) When this option is selected, the radio play s the standard grant
tone when a call is placed. The radio does not play a tone when a call is received.
• Transmit Only: When this option is selected, the radio plays a different “Talk-Around” grant tone
when a call is placed. The radio does not play a tone when a call is received.
• Transmit & Receive: When this option is selected, the radio plays a different “Talk-Around” grant
tone when a call is placed, and at the beginning of a received call.
In the radio personality, the “Alert Tone” parameter needs to be enabled channel on the Conventional Frequency Set. The “Ready To Talk Tone” parameter must also be enabled for the Talk Around Indication tone to be played when the radio is keyed.

3.19 TYPE 99 OPERATION

Type 99 is Harris' name for in-band, two-tone sequential signaling. It is a conventional signaling protocol used to control the muting and unmuting of a radio. This signaling is commonly used for selective calling of individual units or groups of units in a conventional system.
In Type 99 tone systems, calls are not heard until th e radio detects the proper two-tone seq uence. This, in conjunction with squelch, prevents the user from hearing noise or undesired conversations. When the
28
10515-0372-4200, Rev. R
1. At main display, press to select MENU.
radio detects the second tone, it sounds the appropriate Type 99 alert tone. After the second tone stops, the receiver audio path is opened in order for the user to receive messages.

3.19.1 Enable/Disable Type 99 from Call Menu:

2. Use to highlight and select CALL, or press .
3. Use to change T99 TOGGLE between ENABLED and
DISABLED. T99 is displayed in the top of the radio display when Type 99 is enabled.

3.19.2 Disable After PTT

If this option is programmed in RPM, Type 99 is disabled after the radio user activates the PTT. This
allows the radio user to monitor traffic on the channel (after a PTT action) without pressing the monitor button.
Can be used in conjunction with the “Auto Reset” option to disable Type 99 after a PTT and automatically reset, or enable, Typ e 99 after 30 seconds.

3.19.3 Auto Reset

If this option is programmed in RPM, Type 99 is automatically reset, or turned back on, after 30 seconds.
Can be used in conjunction with the “Disable After PTT” option to disable Type 99 after a PTT and automatically reset, or enable, Typ e 99 after 30 seconds.
29
1. At main display, press to select MENU.
Individual Call mode with no activity is
NOTE

3.20 INDIVIDUAL CALLS

An individual call is used to make a call to one radio as opposed to a group of radios. An individual call can only be made on a digital channel.
Refer to Section 3.34 to initiate an individual call from the shortcut menu.

3.20.1 Transmit an Individual Call

2. Use to highlight and select CALL, or press .
3. Use to highlight and select INDIVIDUAL CALL.
4. Use to highlight and select the unit to call or select KEYPAD ENTRY to
enter the Unit ID.
5. Press PTT to make the call.
6. To end call, use to select END CALL. The amount of time the radio remains in
programmable via RPM.
30
Loading...
+ 82 hidden pages
Buy Points How it Works FAQ Contact Us Questions and Suggestions Privacy Policy Cookie Policy Terms of Use