HARRIS TR-0022-E User Manual

Installation &

Product Safety Manual

MM102342V1

Rev. Fp1, Sep/07

M7100IP Series

Mobile Radio

MANUAL REVISION HISTORY

REV DATE SUMMARY OF CHANGES

A Feb/04 Initial release B Apr/04 Add MPE and FCC information for VHF, UHF-L, UHF-H, and 800 MHz

M7100

radio.

C Jun/05 Added MPE and FCC information for 50W VHF mobile radio, added new

remote mounting bracket for small chassis (50W TX and below) radios, and modified dual control unit graphics.

D Jan/06 Updated field programming configuration, added DoC, CE mark, and EU

Automotive Directive graphic.

E Sep/06 Added 100W UHF MPE information and WEEE symbol and statement.

Updated MPE tables by rounding distances to whole numbers safety symbols.

F Sep/07 Added new 800 MHz antenna and updated formatting.

SUPPLEMENTARY INFORMATION

At this time, the M7100 European Community since it does not meet immunity requirements when operated in this mode. The M7100

mobile radio can be used in both trunked and conventional applications.

mobile radio may not be operated while in a desktop station in the

ACKNOWLEDGEMENTS

This device is made under license under one or more of the following US patents: 4,590,473; 4,636,791; 5,148,482; 5,185,796; 5,271,017; 5,377,229; 4,716,407; 4,972,460; 5,502,767; 5,146,497; 5,164,986; 5,185,795.

The voice coding technology embodied in this product is protected by intellectual property rights including patent rights, copyrights, and trade secrets of Digital Voice Systems, Inc. The user of this technology is explicitly prohibited from attempting to decompile, reverse engineer, or disassemble the Object Code, or in any other way convert the Object Code into human-readable form.

The software contained in this device is copyrighted by M/A-COM, Inc. Unpublished rights are reserved under the copyright laws of the United States.

CREDITS

EDACS is a registered trademark and ProGrammer, SCAT, Failsoft, ProSound, ProScan, Aegis, ProFile, ProVoice, and G-STAR are trademarks of M/A-COM, Inc.

Torx is a registered trademark of CAMCAR Division TEXTRON, Inc. POZIDRIV is a registered trademark of Phillips International Company. IMBE is a registered trademark of Digital Voice Systems, Inc. Molex is a registered trademark of Molex Incorporated. All other brand and product names are trademarks, registered trademarks, or service marks of their respective holders.

NOTICE!

This product conforms to the European Union WEEE Directive 2002/96/EC. Do not dispose of this product in a public landfill. This product should be taken to a recycling center at the end of its life.

This manual covers M/A-COM products manufactured and sold by M/A-COM, Inc.

Repairs to this equipment should be made only by an authorized service technician or facility designated by the supplier. Any repairs, alterations, or substitution of recommended parts made by the user to this equipment not approved by the manufacturer could void the user’s authority to operate the equipment in addition to the manufacturer’s warranty.

This manual is published by M/A-COM, Inc., without any warranty. Improvements and changes to this manual necessitated by typographical errors, inaccuracies of current information, or improvements to programs and/or equipment, may be made by M/A-COM, Inc., at any time and without notice. Such changes will be incorporated into new editions of this manual. No part of this manual may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, for any purpose, without the express written permission of M/A-COM, Inc.

Automotive Directive 72/245/EEC – 95/54/EC:

This device is an RF transceiver intended for la nd mobile radio applications. The device may have use restrictions, which require that the national authority be contacted for any system licensing requirements, frequency use, allowable power level, etc.

NOTICE

TABLE OF CONTENTS

Page

1 SAFETY SYMBOL CONVENTIONS........................................................ 5

2 RF ENERGY EXPOSURE INFORMATION............................................6

2.1 RF ENERGY EXPOSURE AWARENESS, CONTROL

INFORMATION, AND OPERATION INSTRUCTIONS FOR

FCC OCCUPATIONAL USE REQUIREMENTS ............................6

2.2 COMPLIANCE WITH RF EXPOSURE STANDARDS................... 7

3 OPERATION SAFETY RECOMMENDATIONS ..................................10

3.1 TRANSMITTER HAZARDS.......................................................... 10

3.2 SAFE DRIVING RECOMMENDATIONS..................................... 11

4 MARITIME CHANNELS..........................................................................12

5 OPERATING RULES AND REGULATIONS ........................................13

5.1 OPERATING TIPS..........................................................................14

6 INTRODUCTION.......................................................................................15

7 UNPACKING AND CHECKING EQUIPMENT.................................... 16

8 PLANNING THE INSTALLATION.........................................................21

9 EQUIPMENT REQUIRED........................................................................23

10 INSTALLATION........................................................................................24

10.1 RUNNING CABLES.......................................................................24

10.2 CONTROL UNIT MOUNTING...................................................... 32

10.3 PIGTAIL BRACKET.......................................................................32

10.4 SPEAKER........................................................................................35

10.5 MICROPHONE HANGER AND/OR HOOKSWITCH

MOUNTING.................................................................................... 36

10.6 SIREN AND LIGHT........................................................................36

10.7 RADIO MOUNTING AND FINAL HOOK-UP..............................37

11 DUAL CONTROL UNIT INSTALLATION............................................42

11.1 PROGRAMMING PROCEDURE - FRONT MOUNT

CONFIGURATION.........................................................................43

11.2 PROGRAMMING PROCEDURE - REMOTE MOUNT

CONFIGURATION.........................................................................46

11.3 INSTALLATION INSTRUCTIONS FOR FRONT MOUNT

DUAL CONTROL UNITS ..............................................................50

11.4 INSTALLATION INSTRUCTIONS FOR REMOTE MOUNT

DUAL CONTROL UNITS ..............................................................54

12 DUAL RADIO UNITS................................................................................ 58

12.1 PRE-INSTALLATION PROGRAMMING PROCEDURE –

DUAL RADIO UNITS ....................................................................58

12.2 INSTALLATION INSTRUCTIONS FOR FRONT/REMOTE

MOUNT DUAL RADIO CONFIGURATION................................60

12.3 INSTALLATION INSTRUCTIONS REMOTE/REMOTE

MOUNT DUAL RADIO CONFIGURATION................................62

12.4 FIELD PROGRAMMING – DUAL RADIO UNITS...................... 63

12.5 ANTENNA ......................................................................................68

13 WARRANTY ..............................................................................................69

1 SAFETY SYMBOL CONVENTIONS

The following conventions are used to alert the user to general safety precautions that must be observed during all phases of operation, service, and repair of this product. Failure to comply with these precautions or with specific warnings elsewhere violates safety standards of design, manufacture, and intended use of the product. M/A-COM, Inc. assumes no liability for the customer's failure to comply with these standards.

The WARNING symbol calls attention to a procedure, practice, or the like, which, if not correctly performed or adhered to, could result in personal injury. Do not proceed beyond a WARNING symbol until the conditions identified are fully understood or met.

CAUTION

The CAUTION symbol calls attention to an operating procedure, practice, or the like, which, if not performed correctly or adhered to, could result in a risk of danger, damage to the equipment, or severely degrade the equipment performance.

The NOTE symbol calls attention to supplemental information, which may improve system performance or clarify a process or procedure.

The ESD symbol calls attention to procedures, practices, or the like, which could expose equipment to the effects of Electro-Static Discharge. Proper precautions must be taken to prevent ESD when handling circuit modules.

WARNING - The electrical hazard symbol indicates there is an electrical hazard present.

2 RF ENERGY EXPOSURE INFORMATION

2.1 RF ENERGY EXPOSURE AWARENESS, CONTROL INFORMATION, AND OPERATION INSTRUCTIONS FOR FCC OCCUPATIONAL USE REQUIREMENTS

BEFORE USING YOUR MOBILE TWO-WAY RADIO, READ THIS IMPORTANT RF ENERGY AWARENESS AND CONTROL INFORMATION AND OPERATIONAL INSTRUCTIONS TO ENSURE COMPLIANCE WITH THE FCC’S RF EXPOSURE GUIDELINES.

NOTICE: This radio is intended for use in occupational/controlled conditions, where users have full knowledge of their exposure and can exercise control over their exposure to meet FCC limits. This radio device is NOT authorized for general population, consumer, or any other use.

Changes or modifications not expressly approved by M/A-COM, Inc. could void the user's authority to operate

CAUTION

This two-way radio uses electromagnetic energy in the radio frequency (RF) spectrum to provide communications between two or more users over a distance. It uses RF energy or radio waves to send and receive calls. RF energy is one form of electromagnetic energy. Other forms include, but are not limited to, electric power, sunlight, and x-rays. RF energy, however, should not be confused with these other forms of electromagnetic energy, which, when used improperly, can cause biological damage. Very high levels of x-rays, for example, can damage tissues and genetic material.

the equipment.

Experts in science, engineering, medicine, health, and industry work with organizations to develop standards for exposure to RF energy. These standards provide recommended levels of RF exposure for both workers and the general public. These recommended RF exposure levels include substantial margins of protection. All two-way radios marketed in North America are designed, manufactured, and tested to ensure they meet government established RF exposure levels. In addition, manufacturers also recommend specific operating instructions to users of two-way radios. These instructions are important because they inform users about RF energy exposure and provide simple procedures on how to control it. Please refer to the following websites for more information on what RF energy exposure is and how to control your exposure to assure compliance with established RF exposure limits.

http://www.fcc.gov/oet/rfsafety/rf-faqs.html http://www.osha.gov./SLTC/radiofrequencyradiation/index.html

2.1.1 Federal Communications Commission Regulations

Your M/A-COM, Inc. M7100IP mobile two-way radio is designed and tested to comply with the FCC RF energy exposure limits for mobile two-way radios before it can be marketed in the United States. When two-way radios are used as a consequence of employment, the FCC requires users to be fully aware of and able to control their exposure to meet occupational requirements. Exposure awareness can be facilitated by the use of a label directing users to specific user awareness information. Your M/A-COM, Inc. M7100 radio has an RF exposure product label. Also, your M7100

two-way

Installation and Operator’s Manuals (operator’s manual MM102341V1 is available at

www.macom-wireless.com

) include information and operating instructions

required to control your RF exposure and to satisfy compliance requirements.

2.2 COMPLIANCE WITH RF EXPOSURE

STANDARDS

Your M/A-COM, Inc. M7100IP mobile two-way radio is designed and tested to comply with a number of national and international standards and guidelines (listed below) regarding human exposure to RF electromagnetic energy. This radio complies with the IEEE and ICNIRP exposure limits for occupational/controlled RF exposure environment at duty factors of up to 50% talk-50% listen and is authorized by the FCC for occupational use. In terms of measuring RF energy for compliance with the FCC exposure guidelines, your radio antenna radiates measurable RF energy only while it is transmitting (talking), not when it is receiving (listening) or in standby mode.

Your M/A-COM, Inc. M7100 following RF energy exposure standards and guidelines:

mobile two-way radio complies with the

• United States Federal Communications Commission (FCC), Code of

Federal Regulations; 47 CFR §§ 2 sub-part J.

• American National Standards Institute (ANSI)/Institute of Electrical

and Electronic Engineers (IEEE) C95.1-1992.

• Institute of Electrical and Electronic Engineers (IEEE) C95.1-1999.

Table 2-1 lists the recommended minimum lateral distance for a controlled environment and for unaware bystanders in an uncontrolled environment, from transmitting types of antennas (i.e., monopoles over a ground plane, or dipoles) at rated radio power for mobile radios installed in a vehicle.

CAUTION

Transmit only when unaware bystanders are at least the uncontrolled recommended minimum lateral distance away from the transmitting antenna.

Table 2-1: Rated Power and Recommended Minimum Lateral Distance

MOBILE RADIO

FREQUENCY

SPLIT

VHF 110 Watts

VHF 50 Watts

UHF–L

378-430 MHz

UHF-H

450-512 MHz

UHF-H

450-470 MHz

800 MHz 35 Watts

RATED POWER OF

VEHICLE-INSTALLED

MOBILE TWO-WAY RADIO

(Antenna P/N: 19B209568P6)

(Antenna P/N: AN102800V1/V2)

50 Watts

(Antenna P/N: AN102800V1)

50 Watts

(Antenna P/N: AN102800V1)

100 Watts

(Antenna P/N: AN102800V1,

AN-025158-001, AN-025158-005,

AN-025158-009, AN-025158-011

(Antenna P/N: AN102800V1)

(Antenna P/N AN-025167-015)

RECOMMENDED MINIMUM

LATERAL DISTANCE FROM

TRANSMITTING ANTENNA

CONTROLLED UNCONTROLLED

93 cm 208 cm

64 cm 142 cm

58 cm 130 cm

47 cm 104 cm

72 cm 162 cm

33 cm 73 cm

38 cm 85 cm

2.2.1 Mobile Antennas

This device must not be co-located or operated in conjunction with any other antenna or transmitter.

Install the radio’s antenna (refer to Table 2-1 for applicable antenna part numbers) in the center of the vehicle’s roof. These mobile antenna installation guidelines are limited to metal body motor vehicles or vehicles with appropriate ground planes. The antenna installation should additionally be in accordance with the following:

• The requirements of the antenna manufacturer/supplier included with the

antenna.

• Instructions in the M7100

minimum antenna cable lengths.

• The installation manual providing specific information of how to install

the antennas to facilitate recommended operating distances to all potentially exposed persons.

Use only the M/A-COM approved/supplied antenna(s) or approved replacement antenna. Unauthorized antennas, modifications, or attachments could damage the radio and may violate FCC regulations.

Radio Installation Manual, including

2.2.2 Approved Accessories

This radio has been tested and meets the FCC RF guidelines when used with the M/A-COM accessories supplied or designated for use with this product. Use of other accessories may not ensure compliance with the FCC’s RF exposure guidelines, and may violate FCC regulations.

For a list of M/A-COM approved accessories refer to the product manuals, M/A-COM’s Products and Services Catalog, or contact M/A-COM at 1-800528-7711.

2.2.3 Contact Information

For additional information on exposure requirements or other information, contact M/A-COM, Inc. at 1-800-528-7711 or at http://www.macom-

wireless.com.

3 OPERATION SAFETY RECOMMENDATIONS

3.1 TRANSMITTER HAZARDS

The operator of any mobile radio should be aware of certain hazards common to the operation of vehicular radio transmitters. A list of several possible hazards is given.

• Explosive Atmospheres – Just as it is dangerous to fuel a vehicle with

the motor running, similar hazards exist when operating a mobile radio. Be sure to turn the radio off while fueling a vehicle. Do not carry containers of fuel in the trunk of a vehicle if the radio is mounted in the trunk.

Areas with potentially explosive atmosphere are often, but not always, clearly marked. Turn OFF your radio when in any area with a potentially explosive atmosphere. It is rare, but not impossible that the radio or its accessories could generate sparks.

• Interference to Vehicular Electronics Systems – Electronic fuel

injection systems, electronic anti-skid braking systems, electronic cruise control systems, etc., are typical electronic systems that can malfunction due to the lack of protection from radio frequency energy present when transmitting. If the vehicle contains such equipment, consult the dealer and enlist their aid in determining the expected performance of electronic circuits when the radio is transmitting.

• Electric Blasting Caps – To prevent accidental detonation of electric

blasting caps, DO NOT use two-way radios within 1000 feet of blasting operations. Always obey the “Turn Off Two-Way Radios” signs posted where electric blasting caps are being used. (OSHA Standard: 1926-900)

• Liquefied Petroleum (LP) Gas Powered Vehicles – Mobile radio

installations in vehicles powered by liquefied petroleum gas with the LP gas container in the trunk or other sealed-off space within the interior of the vehicle must conform to the National Fire Protection Association standard NFPA 58 requiring:

o The space containing the radio equipment shall be isolated by a seal

from the space containing the LP gas container and its fittings.

o Outside filling connections shall be used for the LP gas container. o The LP gas container shall be vented to the outside of the vehicle.

3.2 SAFE DRIVING RECOMMENDATIONS

(Recommended by AAA)

• Read the literature on the safe operation of the radio.

• Keep both hands on the steering wheel and the microphone in its hanger

whenever the vehicle is in motion.

• Place calls only when the vehicle is stopped.

• When talking from a moving vehicle is unavoidable, drive in the slower

lane. Keep conversations brief.

• If a conversation requires taking notes or complex thought, stop the

vehicle in a safe place and continue the call.

• Whenever using a mobile radio, exercise caution.

4 MARITIME CHANNELS

As part of FCC Equipment Authorization Part 80 licensing, a maritime frequency usage plan has been included in this manual for reference.

5 OPERATING RULES AND REGULATIONS

Two-way FM radio systems must be operated in accordance with the rules and regulations of the local, regional, or national government.

In the United States, the M7100 accordance with the rules and regulations of the Federal Communications Commission (FCC). As an operator of two-way radio equipment, you must be thoroughly familiar with the rules that apply to your particular type of radio operation. Following these rules helps eliminate confusion, assures the most efficient use of the existing radio channels, and results in a smoothly functioning radio network.

When using your two-way radio, remember these rules:

• It is a violation of FCC rules to interrupt any distress or emergency

message. As your radio operates in much the same way as a telephone “party line,” always listen to make sure that the channel is clear before transmitting. Emergency calls have priority over all other messages. If someone is sending an emergency message – such as reporting a fire or asking for help in an accident – KEEP OFF THE AIR!

• The use of profane or obscene language is prohibited by Federal law.

• It is against the law to send false call letters or false distress or emergency

messages. The FCC requires that you keep conversations brief and confine them to business. To save time, use coded messages whenever possible.

Series mobile radio must be operated in

• Using your radio to send personal messages (except in an emergency) is a

violation of FCC rules. You may send only those messages that are essential for the operation of your business.

• It is against Federal law to repeat or otherwise make known anything you

overhear on your radio. Conversations between others sharing your channel must be regarded as confidential.

• The FCC requires that you identify yourself at certain specific times by

means of your call letters. Refer to the rules that apply to you r particular type of operation for the proper procedure.

• No changes or adjustments shall be made to the equipment except by an

authorized or certified electronics technician.

Under U.S. law, operation of an unlicensed radio transmitter within the jurisdiction of the United States may be punishable by a fine of up to $10,000, imprisonment for up to two (2) years, or both.

5.1 OPERATING TIPS

The following conditions tend to reduce the effective range of two-way radios and should be avoided whenever possible:

• Operating the radio in areas of low terrain, or while under power lines or

bridges

• Obstructions such as mountains and buildings

• In areas where transmission or reception is poor, some improvement can

be obtained by moving a few yards in another direction or moving to a higher elevation.

6 INTRODUCTION

This manual contains installation instructions for the M7100IP Series Mobile Radio Unit and associated accessories. These instructions cover the mounting and cabling of the radio; interconnection and wiring diagrams are provided for reference.

The radio should be programmed prior to installation. Refer to the Software Release Notes with TQS3385 or TQS3389 for equipment and compatibility requirements.

Shop Programming Cable TQ3409 (CA101288V15) Field Programming Cable TQ3410 (CA101287V1) ProGrammer™ Software TQS3385 or Conventional ProGrammer Software TQS3389

7 UNPACKING AND CHECKING EQUIPMENT

Carefully unpack the radio and identify each item in the shipping container (some items that typically ship are listed below). If damage has occurred to the equipment during shipment, file a claim with the carrier immediately. Refer to Table 7-1 and Table 7-2 in this manual or to M/A-COM’s Products and Services catalog for options and accessories for the M7100 Mobile Radio.

• M7100

Series Mobile Radio Unit

• Control Unit

• Microphone

• Speaker

• Power Cable

• Control Cable

• Front Mount Bracket Kit

• Remote Mount Bracket Kit with

• Control Unit Mount Kit

• Quick Guide (MM102344V1)

• Installation & Product Safety Manual (MM102342V1)

Series

Figure 7-1 – M7100IP Series Mobile Radio Components

Figure 7-2: Rear Angle View of Radio (110W VHF Shown)

Figure 7-3: – Interface Cables

Figure 7-4: Option Cables

Table 7-1: M7100

Option and Accessory Kits (60W TX and Above)

OPTION DESCRIPTION

ANTENNAS

19B209568P6 Antenna, 136-174 MHz, ¼ Wave, TNC, Roof Mount MAHG-AN3G Antenna, 136-870 MHz, ¼ Wave, TNC, Roof Mount MAHG-AN3R Antenna, 136-941 MHz, ¼ W ave, TNC, Thick Roof Mount AN-025158-001 Antenna, 450-470 MHz AN-025158-005 Antenna, 450-470 MHz AN-025158-009 Antenna, 450-470 MHz AN-025158-011 Antenna, 450-470 MHz

REMOTE MOUNT ACCESSORIES (60W AND ↑) MAHG-ZN5Y Includes remote mount radio front cover, front cover logo label, remote

HAND HELD CONTROLLER (WITH SIREN) ACCESSORIES, REMOTE MOUNT (60W AND ↑) MAHG-ZN6C Includes Hand Held Controller (HHC) with mounting bracket, HHC interface

HAND HELD CONTROLLER (WITHOUT SIREN) ACCESSORIES, REMOTE MOUNT (60W AND ↑) MAHG-ZN6A Includes Hand Held Controller (HHC) with mounting bracket, HHC interface

DUAL CONTROL, SCAN CONTROL UNIT, LONG PACKAGE

MAHG-ZN6J Includes scan control unit, control unit logo label, dual control cable (9M),

DUAL CONTROL, SYSTEM CONTROL UNIT, LONG PACKAGE

MAHG-ZN6K Includes system control unit, system control unit keycap kit, control unit

DUAL CONTROL, HHC (WITH SIREN), LONG PACKAGE

MAHG-ZN6M Includes HHC with mounting bracket, HHC interface cable (with Siren

DUAL CONTROL, HHC (WITHOUT SIREN), LONG PACKAGE

MAHG-ZN6L Includes HHC with mounting bracket, HHC interface cable, dual control

DUAL RADIO, HHC (WITHOUT SIREN), LONG PACKAGE

MAHG-ZN6P Includes dual radio cable, programming extension cable, 7.5M power

Refer to M/A-COM’s Products and Services Catalog for the full line of options and accessories available for use with the M7100 mobile radio.

mount accessory cable, remote mount control cable, 7.5M power cable, microphone hanger kit, remote mount radio mounting kit, control unit mounting kit, DB15-HD connector to control unit mounting kit, and mobile speaker.

cable (with siren interface), remote radio front cover, front cover logo label, remote mount accessory cable, remote mount control cable, 7.5M power cable, remote mount radio mounting kit, mobile speaker, and HHC operator and installation manuals.

cable, remote radio front cover, front cover logo label, remote mount accessory cable, remote mount control cable, 7.5M power cable, remote mount radio mounting kit, mobile speaker, and HHC operator and installation manuals.

accessory cable, control unit mounting kit, microphone hanger kit, relay kits (qty 2), mobile speaker, connector support bracket, and M7100IP operator’s manual.

logo label, dual control cable (9M), accessory cable, control unit mounting kit, microphone hanger kit, relay kits (qty 2), mobile speaker, connector support bracket, and M7100IP operator’s manual.

interface), dual control cable (9M), accessory cable, relay kits (qty 2), mobile speaker, connector support bracket, and HHC installation and operator’s manuals.

cable (9M), accessory cable, relay kits (qty 2), mobile speaker, connector support bracket, and HHC installation and operator’s manuals.

cable, remote radio front cover, front cover logo label, remote mount radio mounting kit, connector support bracket, DB15-HD connector to control unit mounting kit, and DB15-HD connector to radio mounting kit.

Table 7-2: M7100

Option and Accessory Kits (50W TX and Below)

OPTION DESCRIPTION

ANTENNAS

MAHG-AN3G Antenna, 136-870 MHz, ¼ Wave, TNC, Roof Mount MAHG-AN3R Antenna, 136-941 MHz, ¼ W ave, TNC, Thick Roof Mount AN-025167-015 Antenna, 700/800 MHz, 5 dB Gain, Combined GPS, Roof Mount

FRONT MOUNT ACCESSORIES (50W AND ↓)

MAHG-ZN5W Includes front mount accessory cable assembly, 7.5M power cable,

REMOTE MOUNT ACCESSORIES (50W AND ↓) MAHG-ZN5X Includes remote mount radio front cover, front cover logo label, remote

HAND HELD CONTROLLER (WITH SIREN) ACCESSORIES, REMOTE MOUNT (50W AND ↓) MAHG-ZN6B Includes Hand Held Controller (HHC) with mounting bracket, HHC interface

HAND HELD CONTROLLER (WITHOUT SIREN) ACCESSORIES, REMOTE MOUNT (50W AND ↓) MAHG-ZN5Z Includes Hand Held Controller (HHC) with mounting bracket, HHC interface

DUAL CONTROL, SCAN CONTROL UNIT, SHORT PACKAGE

MAHG-ZN6S Includes scan control unit, control unit logo label, dual control cable (9M),

DUAL CONTROL, SYSTEM CONTROL UNIT, SHORT PACKAGE

MAHG-ZN6T Includes system control unit, system control unit keycap kit, control unit

DUAL CONTROL, HHC (WITH SIREN), SHORT PACKAGE

MAHG-ZN6V Includes HHC with mounting bracket, HHC interface cable (with Siren

DUAL CONTROL, HHC (WITHOUT SIREN), SHORT PACKAGE

MAHG-ZN6U Includes HHC with mounting bracket, HHC interface cable, dual control

DUAL RADIO, HHC (WITHOUT SIREN), SHORT PACKAGE

MAHG-ZN6N Includes dual radio cable, programming extension cable, 7.5M power

Refer to M/A-COM’s Products and Services Catalog for the full line of options and accessories available for use with the M7100 mobile radio.

microphone hanger kit, front mount radio mounting kit, DB15-HD connector to radio mounting bracket kit, and mobile speaker.

accessory cable, control unit mounting kit, microphone hanger kit, relay kits (qty 2), mobile speaker, connector support bracket, and M7100IP operator’s manual.

logo label, dual control cable (9M), accessory cable, control unit mounting kit, microphone hanger kit, relay kits (qty 2), mobile speaker, connector support bracket, and M7100IP operator’s manual.

interface), dual control cable (9M), accessory cable, relay kits (qty 2), mobile speaker, connector support bracket, and HHC installation and operator’s manuals.

cable (9M), accessory cable, relay kits (qty 2), mobile speaker, connector support bracket, and HHC installation and operator’s manuals.

8 PLANNING THE INSTALLATION

Figure 8-1 illustrates a typical single remote mount mobile radio installation. Instructions for dual control unit and dual radio unit installations are provided in Sections 11 and 12. Before starting any radio installation, plan the location and positioning carefully so that it will be:

• Safe for the operator and passengers,

• Away from airbag deployment area,

• Convenient for the operator to use,

• Neat,

• Protected from water damage,

• Easy to service,

• Out of the way of auto mechanics

• Out of the way of passengers.

Figure 8-1: Typical Installation (Remote Mount Shown)

It is suggested that the radio be installed by one of the many M/A-COM Authorized Service Centers located throughout the United States. Their experienced service personnel can provide a proper radio installation and make any final adjustments that may be needed.

CAUTION

Vehicular Electronics - Electronic fuel injection systems, electronic anti-skid braking systems, air bags, electronic cruise control systems, etc., are typical of the types of electronic devices which might be prone to malfunction due to the lack of protection from radio frequency energy present when a radio is transmitting. If the vehicle contains such equipment, consult the dealer to determine if such electronic equipment will perform normally when the radio is transmitting.

Air Bags – For driver and passenger safety, avoid mounting the radio above or near airbag deployment areas. Note that vehicles might contain front driver and passenger side airbags as well as side airbags. For occupant safety, verify the location of all airbags before installing radio equipment.

For passenger safety, mount the radio securely so that the unit will not break loose in the event of a collision. This is especially important in station wagons, vans and similar type installations where a loose radio could be extremely dangerous to the vehicle occupants.

+ 50 hidden pages

HARRIS TR-0022-E User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual