Harris RF5800MP User Guide

®

RF-5800H-MP

ADVANCED HF/VHF

TACTICAL RADIO

SYSTEM

assuredcommunications

™

a fully integrated, compact

communications system,

offering the security and

performance features your

missions demand

The RF-5800H-MP is a member of the FALCON®II family of multiband tactical
radio systems. It is an advanced HF-SSB/VHF-FM manpack radio that provides
reliable tactical communications through enhanced secure voice and data
performance, networking, and extended battery life. The transceiver’s extended
frequency range (to 60 MHz) provides secure FSK 16 kbps CVSD voice and data
in the VHF band in addition to the HF capability. It is like having two radios in
one compact package.

High speed data rates, up to 9600 bps (HF), and selectable ARQ modes reduce
on-the-air transmission time and enhance secure data transmissions for
improved communications reliability and throughput. The combined robust
digital voice (MELP, LPC-10) and serial tone data modem operate over poor
communication channels. The RF-5800H-MP includes a last ditch voice mode
that transmits digital voice using ultra robust 3G waveforms for operation in
channels where no other waveforms will work.

A serial-tone ECCM waveform with DSP-based excision filtering and a 600 bps
vocoder are combined to provide reliable, secure HF communications in the
presence of jamming. Secure digital voice, 75 to 2400 bps data, and ARQ mode
are supported in the ECCM mode.

The latest third generation HF Link Automation, STANAG 4538, is included and
provides high performance ALE and data link protocols, providing superior
linking and error free data transfer.

®

The Harris Citadel
using either a Harris-standard or a customer-unique algorithm.

An internal Global Positioning System (GPS) receiver option provides local
position information and Automatic Position Reporting (APR). This featur
allows the radio to be used in situational awareness systems without PCs
attached to the outstation radios.The accurate GPS timing data can be used
for ECCM and advanced ALE synchronization.

Integrated telephony capability allows the radio operator to place and

eceive telephone calls using the radio keypad when used with the RF-

r
6010 Tactical Network Access Hub.

The data capability and network management features of the
RF-5800H-MP utilize industry standard IP-based protocols

ovide fast, simple, and dir

to pr
permit easy setup and maintenance of tactical
networks.

The removable Keypad/Display Unit provides
easy access to controls for on-the-move
operation.

ASIC provides high speed data and digital voice encryption

e

ect communications, and

Specifications for the RF-5800H-MP

®

General

Frequency Range 1.6 to 59.999 MHz

Net Presets 75, fully programmable

Frequency Stability ±0.5 x 10

Emission Modes J3E (single sideband, upper or lower, suppressed carrier telephony)

H3E (compatible AM single sideband plus full carrier)

A1A, J2A (compatible CW), selectable; F3E (FM telephone)

RF Input/Output Impedance 50 ohm nominal, unbalanced

Power Input 26 VDC (20.5 to 32 VDC)

Data Interface Synchronous or asynchronous (RS-232C; MIL-STD-188-114A)

Dimensions (with battery case) 10.5W x 3.5H x 13.2D inches (26.7W x 8.1H x 34.3D cm)

Radio Weight 10 lb (4.7 kg) without batteries

Receiver

Sensitivity SSB: –113 dBm (0.5 µV) for 10 dB SINAD

Audio Output 15 mW at 1000 ohm to external handset

Squelch Front panel adjustable, active squelch selectable

IF Rejection Greater than 80 dB

Image Rejection Greater than 80 dB (1st IF image)

AGC Mode dependent, automatically selected

Intermodulation Distortion –80 dB or better for two –30 dBm signals separated 30 kHz or more

Overload Protection Receiver protected to 32 VRMS

Transmitter

Power Output 1, 5, 20 watts PEP/Average -1/+2 dB (1, 5, 10 watts FM)

Audio Input 1.5 mV at 150 ohm or 0 dBm at 600 ohm for full rated output

Carrier Suppression Greater than 60 dB below PEP output (J3E mode)

Undesired Sideband Suppression Greater than 60 dB below PEP output

Spurious Outputs –50 dB relative to rated output, except harmonics which are –40 dB

(Greater than 20 kHz from Fc) minimum for f

Antenna Tuning Capability OE-505 10-foot (3 m) whip (1.6 to 60 MHz)

RF-1936P (AS-2259) NVIS (3.5 to 10 MHZ)
RF-1940-AT001/RF-1941 dipole

–6

o

= 1.6-30 MHz

Environmental

Test Method Per MIL-STD-810F

Vibration Ground Tactical

Operating Temperature –40˚C to +70˚C

Immersion 3 ft. (.9m) of water

Features

Encrypted Data HF: MIL-STD-188-110B App. C (9600 bps and 12,800 bps uncoded),

Automatic Link Establishment (ALE) STANAG 4538 FLSU, MIL-STD-188-141B Appendix A

Data Link Layer Protocol (ARQ) STANAG 4538 (3G), pFED-STD-1052

Frequency Hopping Serial Tone ECCM

ocoder

V

System Configuration

RF-5800H-MP025
RF-5800H-MP026 Citadel Internal
RF-5800H-MP035 Datotek/Citadel —
RF-5800H-MP036 Datotek/Citadel Internal

Major System Components

RF-5800H-V006 20 W

RF-5832H 125 Watt Power Amplifier
RF-5833H 150 Watt Vehicular Adapter Unit
RF-5834H 400 Watt Power Amplifier
RF-5382H 150 Watt Antenna Coupler

RF-382A 400 W

RF-5845H Pre/Post Selector

FALCON and Citadel are registered trademarks of Harris Corporation.
Specifications are subject to change without notice.

App. B 39-tone (2400 bps), (maximum data rate)

one (2400 bps),

Serial T
STANAG 4285 (2400 bps), STANAG 4415 (75 bps),
STANAG 4539 (9600bps), FSK (600 bps)
VHF: FSK (16 Kbps)

HF: LPC-10-52E (600/2400), MELP (600/2400), VHF: CVSD

Digital Encryption GPS

Citadel

ehicular Adapter

att V

att Antenna Coupler

—

assuredcommunications

4610

680 University A

RF Communications Division |

™

1

© Copyright 2005 Harris Corporation 08/05 DS-211J

venue | Rochester

.harris.com

www

, NY USA

1-585-244-5830

1