Harris OpenSky P7200 Quick Manual
A
d
A
Quick Guide
MM-009816-001
Rev. F, Apr/11
Top View Side View
P7200 Radio Controls
Applies power to the radio and adjusts the
Power On/Off
OpenSky
®
P7200
Portable Radios
Volume Knob
Voice Group
Selection Knob
Emergency
Button
PTT Button The PTT button is pressed to transmit.
Option Buttons
Copyright © 2006-2011 Harris Corporation. All rights reserved.
volume.
When the radio is powered on, the voice group is
displayed on line two until the Caller ID/Alias is
received.
A 16 position rotary knob for selecting voice
groups.
Pre-programmed to declare an emergency.
Navigate through available items within a submenu.
P7200 Display and Status Indicators
Radio successfully registered to the network.
Stealth mode is enabled (all tones and display
backlight is disabled, voice is still heard).
Radio is transmitting or receiving a manual or OTAR
(Network) encrypted call.
P7200 Display and Status Icons ( Continue d)
Battery charge indicator.
Flashing – Low battery indicator.
Indicates the client is connected to a VTAC.
Indicates Selective Call mode.
Indicates received signal strength.
The P7230 model radio does no t have a front mounted keyp ad.
Lock/Unlock the Keypad
1. Press and hold the button.
2. While holding the button, press the button on the side of
Indicates the radio is scanning for a VTAC during
XCOV or XCOV-TG mode.
Displayed when Scan Mode is Normal or Fixed.
(P7230 Only) Visible when is radio is traversing
options using the and buttons.
P7200 Radio Keypad Functions
P7270
the radio.
Activates a selected item within a list, similar to an
“Enter” key.
While in “Dwell Display,” press repeatedly to scroll
through and view status d isplay (on 2nd line) for current
profile, caller, received voice group, and cha nn el.
P7250
P7200 Radio Keypad Functions (Continued)
Scrolls through available menu items.
(P7270 Only) Keys used to place telephone
interconnect and individual (unit-to-unit) calls. Functions
0 – 9
as a telephone keypa d. Also used to enter passwords
for logging into the OpenSky network (if not preconfigured for automat ic registration at power-up.)
(P7270 Only) * Initiates log in, log out, selective call,
telephone interconnect call, etc. Also acts as an escape
button or a backspace that clears everything, not just
the last digit/character.
(P7270 Only) # Used in conj unction with alpha- numeric
keys for passwords and OpenSky functions.
(P7250 Only) Currently undefined.
(P7250 Only) Toggles the Scan Mode ON/OFF.
(P7250 Only) Currently undefined.
ttach Battery Pack
Remove Battery Pack
Battery Packs
1. Align the tab at top of the
battery pack with the slot at
the top of the radio.
2. Press down on the bottom of
the battery until it clicks into
place.
1. Press latch.
2. Lift from bottom.
3. Slide back.
P7200 Scan Modes
Scan Mode Explanation
Full communications (listen and talk) with the
No Scan
Normal
Fixed
1. Use or to cycle through the menu until “App Mode” is
displayed.
2. Use or to choose an available mode. Press and or
to confirm (Y/N).
3. Press the button to confirm.
or
1# will transition the radio to ECP mode. If ECP mode is not loaded
in the radio, the radio displays “No App.”
For more detailed operating instructions and a list of options and
accessories, refer to the operator’s manual MM23772 (available
online at www.pspc.harris.com).
active voice group.
No calls received from other voice groups.
The user can scan all voice groups in the active
profile that are not locked out as long as there is
demand on the site.
Priority (P1 and P2) groups are user selectable.
Receive calls from more than one voice group, if
available from the current site.
Allows dragging of the selected voice group, P1,
P2, and default emergency voice group.
The default emergency voic e group, as wel l as any
emergency-enabled voice groups, is only dragged
if it is in emergency mode.
Functions the same as Normal Scan Mode,
except the priority groups are fixed to the
selected profile’s pre-defined P1 and P2 groups
(configured via the UAS). In this mode, P1 and
P2 groups CANNOT be locked out.
Changing Operating Mode
A
f
yyf
A
y
y
f
P7200 Alert Tones
Call Queued
Call Denied
Client
Connect
Client
Disconnect
Grant (or Go-
Ahead)
Call
Removed
1 low tone/2 high tones. Call queued for
processing.
3 short tones. Radio is out of coverage area or
requested voice group is active.
2 short beeps. Portable is connected to the V-TAC
in XCOV or XCOV-TG.
2 short beeps (lower pitch than Client Connect
Tone). Radio has disconnected from the V-TAC.
1 short beep. Sounds when resources become
available for a call request placed in the queue (if
enabled) upon channel access.
1 long low-pitched tone. Access to the channel has
been lost (out of coverage area or preempted by
higher-priority call).
Low Battery 1 mid tone followed by 1 low tone. Low battery.
Selective
Alert
Received
Emergency
Tone
Emergency
Cleared Tone
4 short tones. Only played once to indicate a
selective alert has been received.
3 long tones. Sounds when an emergency is
declared.
1 long low-pitched tone. Sounds when an
emergency is cleared.
A ringing tone similar to a telephone. Ringing is
Selective Call
Ring Tone
repeated every four seconds until the call is
accepted or rejected by the radio being called or
until the network drops the call if unanswered after
one minute.
221 Jefferson Ridge Parkway | Lynchburg, VA USA 24501
Public Safety and Professional Communications
www.pspc.harris.com | 1-800-528-7711
P7200 Alert Tones (Continued)
Roam Tone 2 short tones, 1 high-pitched and 1 low-pitched.
Out of Range
Tone
Man Down
Tone
Tri-tone beep. If enabled via programming, sounds
when the radio is not within operational range of
the base station.
1 long tone, 1 short beep. The radio has assumed
a horizontal position (requires external sw itch
connected to UDC port).
P7270 Keypad Functions
*0
*1
Log-off command: *0## (logs the user off the
system).
Manual log-in command: *1<User ID> #
<Password> ## (required for encryption).
*2 Status Message: *2 <0...9> #.
Enter Scene of Incident (SOI) Mode:
*4#<ccc>#<bb># where ccc is the SOI channel
*4
number and bb is the number assigned to each
frequency band.
Press *40# to exit SOI Mode.
*5 RTT Message: *5 <0...9> #.
*7
*8
Initiate Selective Alert: *7<Target ID>#[Choose
Message]#.
Initiate Selective Call:*8<Selective call
number>#(PTT to dial).
Public Switched Telephone Network (PSTN)
*9
Call command: *9 <telephone number># (PTT
to dial).
*32
Begin Manual Encryption command: *32<Pre-
determined Encryption Key># .
End Manual Encryption command. *33#. Radio
*33
displays “Unsecure” to indicate manual
encryption has ended.
*61
Initiate XCOV Mode command: *61# Extended
coverage for individual users.
P7270 Keypad Functions (Continued)
*62
Initiate XCOV-TG Mode command: *62#
Extended coverage for voice groups.
*63 Initiate XCOV-PROF Mode command: *63#.
*60
Exit XCOV Mode command: *60#
Returns to the normal mode.
P7270 Quick Buttons
1#
2#
3#
4#
6#
Transition to ECP Mode.
Stealth Mode On/Off.
Scan Mode On/Off.
Lights/Tones On/Off.
XCOV or XCOV-TG Attach/Detach.
Tri-Color LED
Green
Receiving.
Red Transmitting.
Flashing rapidly, radio is receiving an emergency
Orange
call. Flashing every ½ second, the selected voice
group is in emergency state (not transmitting).
Change the Active Profile
1. Press the or buttons until “ProfileMenu” is displayed. The
name of the currently active profile is displayed.
2. Use or to scroll through the list of available profiles.
3. Press to activate the selected profile.
Change the Selected Voice Group
Turn the Group Selection knob on top of the radio to select desired
voice group.
Receive a Voice Call
No action is required on the part of the user.
radio receiving a System All Call displays “All Call” instead of the
alias. A radio not transmitting on a voice group in emergency status
will drop all other calls to scan into an All Call.
Transmit a Voice Call
1. Select the desired voice group.
2. Depress and hold the PTT button, wait a couple of seconds. If
programmed by the administrator, a grant tone will be sounded.
3. Begin speaking into the microphone in a normal voi ce.
For maximum clarity, hold the radio approximately 2-inches from
your mouth. Take care not to cover up the microphone while
speaking.
4. Release the PTT button when finished speaking.
Transmit a Selective Call
Manually Dialing a Selective Call
1. Enter *8, the User ID number of the user being called, and the #
key (no dashes or spaces). This feature must be enabled by the
administrator.
*8<destination user id>#PTT
A shortened User ID number can be dialed using the following
guidelines:
If the radio being called is in the same region and agency –
enter only the last four digits.
If the radio being called is in the same region, but a different
agency – enter the last seven digits.
If the radio being called is in another region or if the area is
unknown – enter all ten digits.
2. Press PTT (and releas e) to ring the user being called.
NOTICE!
The material contained herein is subject to U.S. export approval. No
export or re-export is permitted without written approval from the U.S.
Government. Rated: EAR99; in accordance with U.S. Dept. of Commerce
regulations 15CFR774, Export Administration Regulations.
Transmit a Selective Call (Continued)
Selective Call Using Speed Dial
1. Scroll through the Menu options using the or button until
“Speed Dial” appears in the second line of the display.
2. Using the or keys, scroll through the pre-programmed
speed-dial numbers until the desired number appears in the
display and press the PTT button.
Receive a Selective Call
Press the , , or button to accept the selective call.
Terminate a Selective Call
Terminate a Selective Call by pressing the or #. “HANGUP” will
appear in the display followed by the active voice group.
Declare an Emergency
1. Press the red emergency button on the radio to enter emergenc
mode. Emergency is raised after the Emergency Raise Dela
(default is 1 second).
2. The microphone is ho t (open mic) for a programmed amoun t o
time in order to send your voice out on the emergency voice
group.
3. All of the radios in the emergency voice group hear your call and
see the emergency voice group displayed on their radio.
Clear an Emergency
If enabled via programming, clear an emergency by:
1. Pressing and holding while simultaneously pressing the
emergency button.
2. Release both buttons.
Stealth Mode
1. Press the or button to scroll through menus until
“StealthMenu” appears in the display.
2. Press the or button once to activate Stealth Mode, exit the
Stealth Menu, and return to the Dwell Display.
Or
On P7270 radios, 2# can be used to enter Stealth Mode.
P7250 Radios - Press any key to disable Stealth Mode.
P7270 Radios - Exit using 2# or via the Stealth Mode menu.
Loading...