This equipment s h oul d not be installed, o perated or maintai ne d
contents of this manual. Failure to read and comply with the
contents of this manual can result in serious bodily injury or
MANUAL
TROLLEY
TF2/TS2 SERIES
1/2 Ton through 20 Ton Capacity
Code, Lot and S eri al N umb er
by any person who has not read and understood all the
death, and/or pr op erty d amag e.
8.0 1/2 to 20 Ton Par ts Lis t
When ordering Parts, please provide the Hoist code number, lot number and serial number located on the Hoist nameplate
(see fig. below).
Reminder: Per sections 1.1 and 3.5.1 to aid in ordering Parts and Product Support, record the Hoist code number, lot number
and serial number in the space provided on the cover of this manual.
TF2/TS2 Series Nameplate
The parts list is arranged into the following sections:
Section ½ to 5 Ton Page
8.1 TF2 Push Trolley Parts – 1/8 to 5 Ton ................................................................................................... 62
8.2 TF2 Geared Trolley Parts – 1/8 to 5 Ton ................................................................................................ 64
8.3 TS2 Push Trolley Parts – 1/8 to 5 Ton ................................................................................................... 66
8.4 TS2 Geared Troll e y Parts – 1/8 to 5 Ton ............................................................................................... 68
Section 8 to 20 Ton
8.5 TF/TS Push/Geared Trolley Parts for CB Hoist – 8 to 10 Ton ............................................................... 70
8.6 TF/TS Push/Geared Trolley Parts for ER2 Hoist – 8 to 10 Ton ............................................................. 72
8.7 TF/TS Geared Trolley Parts for CB Hoist – 15 to 20 Ton ...................................................................... 74
8.8 TF/TS Geared Trolley Parts for ER2 Hoist – 15 to 20 Ton .................................................................... 78
In the column "Parts Per Trolley" a designator is used for parts that apply only to a particular model or option.
Refer to Section 2 for TF2/TS2 Trolley model numbers and additional descriptions.
The designators are:
Push = Push TF or TS model only
Geared = Geared TF or TS model only
Std. = Standard Flange Range
Wide = Optional Wide Flange Range
TS = TS model only
18 Thick spacer (qty) X T7G116010(6) T7G116020(6) T7G116030(9) MSF116050(5)
25 Suspender H 1 T6G019010 T6G019020 T6G019030
26 TCR Suspender 1
Suspension Shaft Assembly
27
Extended
28 Suspension Shaft 1
1
(1 Fall Chain)
{5.01 to 8.00”}
T7GD181010
{5.01 to 8.00”}
T7GA0109181
6040403 TF26K531030S
T7GD181020
{6.03 to 12.00”}
T7GA0209181
{6.03 to 12.00”}
T7GD181030
{6.03 to 12.00”}
T7GA0309181
{6.03 to 12.00”}
{7.03 to 12.00”}
{7.03 to 12.00”}
T7GD181050
T7GA0509181
31 Split Pin 1 9009423
32 Fixing Spacer 2
36 Thick Spacer X
* Quantity is 1 for 5 Ton.
{5.01 to 8.00”}
T7GA0109182
T7G116010
{5.01 to 8.00”}-(5)
69
T7GA0209182 T7GA0309182 T7GA0509182
T7G116020 (11) T7G116030 (11) MSF116050 (11)
8.5 TF/TS Push/Geared Trolley Parts for CB Hoist – 8 to 10 Ton
TF/TS Trolley for CB Hoist, 8 to 10 Ton
TF/TS Additional Geared Trolley Parts for CB Hoist, 8 to 10 Ton
70
8.5 TF/TS Push/Geared Trolley Parts for CB Hoist – 8 to 10 Ton
Parts
Per Trolley
1
Hand wheel Assembly
1
T3G123AM075
2
Slotted nut 1 T3P154050
3
Washer 1 9012515
5
Split Pin 1 9009423
6
Snap ring 2 9047130
7
Ball bearing 2 9000506
8
Pinion 1 T3G127100
9
Socket bolt 4 9091272
10
Spring washer 4 9012711
11
Hand chain guide
2
T3G125075
12
Socket bolt 4 9091295
13
Spring washer 4 9012712
15
Ball bearing 2 9000506
16
Snap ring 2 9047130
17
Hand chain 1 HCCF005
18
Side plate G Assembly
1
T3G5111075
19
Track wheel G Assembly
2
T3G1101075
20
Washer 4 MS104075
21
Snap ring 4 9047140
22
Snap ring 4 9047140
23
Washer 4 MS104075
25
Side plate S assembl y
1
T3G5110075
Push
T3P800080
T3P800100
Geared
T3G800080
T3G801100
Std. 1 MS115075
Wide
MSF181075
28
Thick spacer* 8 MS117075
Std.
8
Wide
9
30
Fixing spacer
Wide 2 M6SE100S9182
32
Shaft stopper pin
1
MS164075
33
Slotted nut 1 T3G154075
34
Split pin 1 9009436
35
Split pin 1 9009436
50
Nut
TS
bumpers)
8
9093439
51
Spring washer 8 9012715
52
Drop Stop 4 T5AB0759141
55
Nut
8
9093439
56
Spring washer 8 9012715
58
Socket bolt 8 9093196
59
Nut
4
9093424
60
Spring washer 4 9012711
61
Bumper 4 MR1FS9631
Figure No.
4 Hand wheel 1 T3G123075
14 Pinion holder 1 T3G128100
24 Track wheel S assembly 2 T3G1102075
Part Name
8 Ton 10 Ton
Geared
26 Name plate B
27 Suspension Shaft
29 Thin spacer*
31 Bolt 1 MS161100
(Not
compatibl
53 Socket bolt 8 90912156
54 Bumper Kit
57 Drop Stop 4 60818
*See owner’s manual for placement of thick and thin spacers.
e with
Optional
for TF or
TS
1
MS116075
4 6078501
71
8.6 TF/TS Push/Geared Trolley Parts for ER2 Hoist – 8 to 10 Ton
Trolley Fixing Shaft is shown in front of Suspension Shaft for clarity. Actual location is behind the suspension shaft
TF/TS Trolley for ER 2 Hoist, 8 to 1 0 Ton
TF/TS Additional Geared Trolley Parts for ER2 Hoist, 8 to 10 Ton
72
8.6 TF/TS Push/Geared Trolley Parts for ER2 Hoist – 8 to 10 Ton
Parts
Per Trolley
1
Hand wheel Assembly
1
T3G123ASM075
2
Slotted nut 1 T3P154050
4
Hand wheel 1 T3G123ASM075
5
Split Pin
1
9009423
9047130
7
Ball bearing 2 9000506
8
Pinion 1 T3GB1009121
9
Socket bolt 4 9091272
10
Spring washer 4 9012711
11
Hand chain guide 2 T3G125075
12
Socket bolt 4 9091295
13
Spring washer 4 9012712
14
Pinion holder 1 T3B1009122
15
Ball bearing 2 9000506
9047130
17
Hand chain 1 HCCF005
18
Side plate G Assembly
1
T3G5111075
19
Track wheel G Assembly
2
T3G1101075
20
Washer 4 MS104075
21
Snap ring 4 9047140
22
Snap ring 4 9047140
23
Washer 4 MS104075
24
Track wheel S assembly
2
T3G1102075
25
Side plate S assembly
1
T3G5110075
Push 1 T3P800080
T3P800100
Geared
T3G800080
T3G801100
Std.
MS115075
Wide
MSF181075
28
Thick spacer* 8 MS117075
Std.
8
Wide 9 30
Fixing spacer
Wide 2 M6SE100S9182
31
Bolt
1
MS161100
32
Shaft stopper pin 1 MS164075
33
Slotted nut 1 T3G154075
34
Split pin
1
9009436
35
Split pin
1
9009436
36
Split pin, Trolley Fixing Shaft**
2
38
Hoist Suspension Plates** 2
50
Nut
TS
bumpers) 8 9093439
51
Spring washer 8 9012715
52
Drop Stop 4 T5AB0759141
54
Bumper kit
4
6078501
55
Nut
4
9093439
56
Spring washer 8 9012715
57
Drop Stop 8 60818
58
Socket bolt 4 9093196
59
Nut
8
9093424
60
Spring washer 4 9012711
61
Bumper 4 MR1FS9631
Figure No.
3 Washer 1 9012515
6 Snap ring 2
16 Snap ring 2
26 Name plate B
Part Name
Geared
8 Ton 10 Ton
27 Suspension Shaft
29 Thin spacer*
37 Trolley Fixing Shaft** 1
(Not
compatibl
53 Socket bolt 8 90912156
*See owner’s manual for placement of thick and thin spacers.
**These parts come with the hoist and are not included with the trolley
e with
Optional
for TF or
1
MS116075
TS
73
8.7 TF/TS Geared Trolley Parts for CB Hoist – 15 to 20 Ton
TF/TS Trolley for CB Hoist, 15 to 20 Ton
74
8.7 TF/TS Geared Trolley Parts for CB Hoist – 15 to 20 Ton
Figure
No.
Parts Per
Trolley
1
Hand wheel Assembly
2
T3G123AM075
2
Slotted nut 2 T3G154050
3
Washer 2 9012515
4
Hand wheel
2
T3G123075
5
Split Pin 2 9009423
6
Snap ring 4 9047130
7
Ball bearing 4 9000506
8
Pinion 2 T3G127100
9
Socket bolt 8 9091272
10
Spring washer
8
9012711
11
Hand chain guide
4
T3G125075
12
Socket bolt 8 9091295
13
Spring washer
8
9012712
14
Pinion holder
2
T3G128100
15
Ball bearing 4 9000506
16
Snap ring 4 9047130
17
Hand chain 2 HCCF005
18
Side plate G Assembly
2
T3G5111075
19
Track wheel G Assembly
4
T3G1101075
20
Washer 8 MS104075
21
Snap ring 8 9047140
22
Snap ring 8 9047140
23
Washer 8 MS104075
24
Track wheel S assembly
4
T3G1102075
25
Side plate S assembly
2
T3G5110075
26
Name plate B
2
T3G801150
T3G801200
Std. 2 MS115075
Wide
MSF181075
Std.
6
Wide
22
Std.
20**
Wide
16
31
Bolt 2 MS161100
32
Shaft stopper pin
2
MS164075
33
Slotted nut
2
T3G154075
34
Split pin 2 9009436
35
Split pin 2 9009436
16
15
Part Name
Geared
15 Ton 20 Ton
27 Suspension Shaft
28 Thick spacer*
29 Thin spacer*
*See owner’s manual for p lace ment of thi ck an d th in spac ers.
**For flange widths between 5 ½ to 5 , six (6) additional thin spacers are required (for a total of 26 thin
spacers).
75
MS117075
MS116075
8.7 TF/TS Geared Trolley Parts for CB Hoist – 15 to 20 Ton
Figure
No.
Parts Per
Trolley
36
Bolt 4 MS106150
37
Connection plate
2
MS105150
38
Spring washer
4
9012713
39
nut
4
9093433
40
Bolt 1 9093327
41
Spring washer
1
9012711
42
Key plate 1 T3G145150
43
Nut 8 9093445
44
Spring washer
8
9012717
45
Suspension shaft
1
T3G144150
46
Stay bolt 4 T3G143150
47
Suspension plate A
1
T3G141200
48
Suspension plate B
1
T3G142150
50
Nut
TS
bumpers) 8 9093439
51
Spring washer
8
9012715
52
Drop Stop
4
T5AB0759141
54
Bumper Kit
Optional for
4
6078501
55
Nut 4 9093439
56
Spring washer
4
9012715
57
Drop Stop 8 60818
58
Socket bolt 8 9093196
59
Nut 4 9093424
60
Spring washer
8
9012711
61
Bumper 4 MR1FS9631
Part Name
15 Ton 20 Ton
(Not
compatible
with
53 Socket bolt 8 90912156
TF or TS
76
This Page Intentionally Left Blank
77
8.8 TF/TS Geared Trolley Parts for ER2 Hoist – 15 to 20 Ton
TF/TS Trolley for ER2 Hoist 15 to 20 Ton
78
Figure
1
Hand wheel Assembly
2
T3G123ASM075
2
Slotted nut 2 T3G154050
3
Washer
2
9012515
4
Hand wheel 2 T3G123075
5
Split Pin
2
9009423
6
Snap ring 4 9047130
7
Ball bearing 4 9000506
8
Pinion 2 T3GB1009121
9
Socket bolt 8 9091272
10
Spring washer 8 9012711
11
Hand chain guide 4 T3G125075
12
Pinion holder 2 T3GB1009122
13
Socket bolt 8 9091295
14
Spring washer 8 9012712
15
Ball bearing 4 9000506
16
Snap ring 4 9047130
17
Hand chain 2 HCCF005
18
Side plate G Assembly
2
T3G5111
19
Track wheel G Assembly
4
T3G1101075
20
Washer 8 MS104075
21
Snap ring 8 9047140
22
Snap ring 8 9047140
23
Washer 8 MS104075
24
Track wheel S assembly
4
T3G1102075
25
Side plate S assembly
2
T3G5110075
26
Name plate B
2
T3G801150
T3G801200
Std. 2 MS115075
Wide
MSF181075
Std.
6
Wide
22
Wide
16
31
Bolt
2
MS161100
32
Shaft stopper pin 2 MS164075
33
Slotted nut 2 T3G154075
34
Split pin
2
9009436
35
Split pin
2
9009436
36
Bolt
4
MS106150
37
Connection plate 2 MS105150
38
Spring washer 4 9012713
39
Nut
4
9093433
41
Nut
TS
8
9093439
42
Spring washer 8 9012715
43
Bumper 4 T5AB0759141
46
Hoist Suspension Plates†
54
Bumper Kit
4
6078501
55
Nut
4
9093439
56
Spring washer 4 9012715
57
Drop Stop 8 60818
58
Socket bolt 8 9093196
59
Nut
4
9093424
60
Spring washer 8 9012711
61
Bumper 4 MR1FS9631
16
15
No.
8.8 TF/TS Geared Trolley Parts for ER2 Hoist – 15 to 20 Ton
Part Name
Parts
Per Trolley
15 Ton 20 Ton
27 Suspension Shaft
28 Thick spacer*
29 Thin spacer*
Geared
Std. 20**
MS117075
MS116075
(Not
compatible
44 Socket bolt 8 90912156
with
bumpers)
Optional for
TF or TS
*See owner’s manual for placement of thick and thin spacers.
**For flange widths between 5 ½ to 5 , six (6) additional thin spacers are required (for a total of 26 thin spacers).
†
Hoist Suspension Plates come with the hoist and are not included with the trolley.
79
www.harringtonhoists.com
Harrington Hoists, Inc. Harrington Hoists – Western Division
401 West End Avenue 2341 Pomona Rd. #103
Manheim, PA 17 54 5-1703 Corona, CA 928 80-6973
Phone: 717-665-2000 Phone: 951-279-7100
Toll Free: 800-233-3010 Toll Free: 800-317-7111
Fax: 717-665-2861 Fax: 951-279-7500
TF2TS2OM
Loading...
+ hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.