
READY
SLAT KIT PLATFORM BED
ASSEMBLY INSTRUCTIONS
( FULL )
Before assembling your Bed slat kit, please read through these
instructions carefully. Familiarize yourself with the different parts.
Please note that you will require a Phillips Head Screwdriver and an Allen wrench.
PARTS LIST
01
02
03
04
04
HARDWARE
1 1/2” Allen Screw - 8 pcs
Spare - 1 pc
Step 1
01
02
03
NOTE: WE INCLUDE SPARE HARDWARE IN CASE THE ALLEN WRENCH, ALLEN
SCREW OR WOOD SCREW ARE DAMAGED DURING ASSEMBLY.
B
1 1/4” Wood Screw - 8 pcs
Assemble bed frame according to bed assembly instructions.
If using mattress and foundation set the bed up low and use short center leg.
If using bed drawer choose the tall center leg.
03
04
Spare - 2 pcs
SLAT KIT
CENTER RAIL
TALL CENTER LEG
SHORT CENTER LEG
Allen wrench - 1 pc
CA
Spare - 1 pc
2 SET
2 PCS
4 PCS
4 PCS
Unpack slat kit and check that contents are complete
Step 2
Assemble center leg (03 / 04) and center rail (02)
using allen screw (A).
Tighten with the allen wrench (C).
Repeat for other center rail.
C
03 / 04
Allen wrench
A
03 / 04
C
A
Adult Assembly
02
A
1 1/2” Allen Screw
Page 1 of 2Slat Kit Full Platform Bed

Step 3
Adult Assembly
A
1 1/2” Allen Screw
A
A
01
02
A
SECTION 1
SECTION 2
C
Allen wrench
Lay the slat kit (01) onto the bed.
Attach center rail assembly (02) to slat kit (01).
Using allen screw (A), tighten with the allen wrench (C).
Repeat for section 2.
Step 4
B
Adult Assembly
TRUNDLE BED
A
A
SECTION 1
If using a trundle bed attach center rail assembly
off center as shown. Repeat for section 2.
B
01
B
1 1/4” Wood Screw
Phillips Head
Screwdriver
Customer Supplied
Be sure to align slat kit evenly with both
ends of ledger strip.
Screw slat kit (01) to ledger strip, using wood screw (B).
Tighten with Phillips head screwdriver.
Be sure the space between slats is even.
Slat Kit Full Platform Bed
Page 2 of 2