CAUTION: Read instruction carefully and turn electricity off at main circuit breaker panel
before beginning installation.
Care and Cleaning
To clean the outside of the fixture, use a dry or slightly dampened clean cloth(use clean
water, never a solvent)to wipe the surface of the fixture.
To clear the inside of the fixture, first disconnect power to the fixture by turning off the circuit
breaker or by removing the fuse at the fuse box. Next, use a dry or slightly dampened clean
cloth(use clean water, never a solvent) to wipe the interior surface of the fixture
Do not use any cleaners with chemical, solvents or harsh abrasives. Use Only a dry soft cloth
to dust or wipe carefully.
Estimated Assembly Time:30 minutes
Assembly Instruction
PIECE DESCRIPTION PICTURE QUANTITY
A
3X
PIECE DESCRIPTION PICTURE QUANTITY
Mounting Screw
Socket Ring
Bulb
Mounting Plate
Wire Nut
Canopy
Ball Nut
Socket
Metal Frame
Flower Acrylic
B
C
D
E
F
G
H
I
J
1X
1X
1X
1X
1X
1X
2X
56X
(54+1)X
1X
D1
1X
D2
Collar
Allen Screw
1X
D3
Allen Wrench
1/3
Part List and Hardware List
Installation
Step 1
Unpack all parts from cartons carefully.
by removing the Canopy Nut(E) anti-clockwise.
Step 2 Wire connection
*Note: When parallel wire(SPTI&SPTII)is used. The neutral wire is square shaped and
ridged and the hot wire will be round in shape and smooth.(See illustration on left)
Grounding Instructions:
a) For installation in the United States: Wrap ground wire from outlet box around green
ground screw on mounting bracket, no less than 2" from wire end. Tighten ground screw. If
fixture is supplied with a ground wire, connect to outlet ground wire with a wire connector.
b) For installation in Canada: If fixture is supplied with ground wire, wrap ground wire
around green grounding screw on mounting bracket. Tighten ground screw.
Separate the Mounting Plate(B) from the Canopy(D)
The adjustment or shortening of the lighting fixtures
suspension length is only needed if the factory set cord
length is not appropriate for your installation.Adjust the
power cord length by loose the Allen Screw(D2) of the
Colloar(D1) with the Allen wench (D3), tighten the Allen
Screw(D2) if the cord length is desired.
Connect,Hot,Black or Red outlet Supply Wire to:
Connect,Neutral,White Outlet Supply Wire to:
Clear,Brown,Gold or Black without Tracer(colored stripes)
Clear,Brwn,Gold or Black without Tracer(colored stripes)
Insulated Wire(not green)with copper metal conductor
Insulated Wire(not green)with Silver metal conductor
Black
White
*Parallel Cord(round&smooth)
*Parallel Cord(square&ridged)
B
D
E
D1
D2
2/3
Step 3
Fix the Mounting Plate(B) to the junction box
with Mounting Screw (C )
Attach the Canopy (D) to the junction box and fix it
by turning the Canopy Nut (F) clockwise.
Unscrew the Ball Nut(F) from the Metal Frame(G)
Unscrew the Socket Ring(H) from the Socket (E).
Place the Metal Frame(G) over the socket(E) and
fix it by turning the Socket Ring(H) clockwise.
Insert the bulb (I) into the Socket (E).
Insert each Flower Acrylic(J) into the threaded portion
of the Metal Frame(G), and fix it by turning
the Ball Nut(F) clockwise till tight one by one.
PLEASUE USE ON/OFF TYPE"A" BULB
MAX 40-WATT OR CFL BULB MAX 9-WATT
THERE IS CFL 9-WATT BULB IN THE BOX.
Step 4
Consult a qualified electrician to ensure correct branch
circuit conductor
ENJOY YOUR LAMP
D
F
J
F
G
H
I
B
C
E
A
3/3
Loading...