Harrie Leenders FUGA M, DORAN, DIA, FUGA S, STOR Instructions For Installation, Use And Maintenance Manual
Harrie Leenders Fuga M - Instructions for Installation, Use and Maintenance
1
INSTRUCTIONS FOR INSTALLATION,
USE AND MAINTENANCE
FUGA M
Harrie Leenders Fuga M - Instructions for Installation, Use and Maintenance
2
Harrie Leenders Fuga M - Instructions for Installation, Use and Maintenance
3
General instructions and regulations
Maintenance ………………………………………………………….. 6
Service ………………………………………………………………… 6
Declaration ……………………………………………………………. 6
Characteristics report ………………………………………………... 6
Description of the Fuga M ………………………………………...… 6
HETAS supplement
Manual
What you should know about the Fuga M ………………………… 12
The three basic rules for proper burning ………………………….. 12
The fine heat from wood …………………………………………….. 12
Initial fire-up, a good start …………………………………………… 13
Initial fire-up in steps …………………………………………………. 13
How to use the Fuga M …………………………………………..… 14
The power of fire ……………………………………………………… 14
A few tips ……………………………………………………………… 14
Maintenance
Ceramic firebricks ……………………………………………………. 15
Glass ………………………………………………………………….. 15
Moving parts ………………………………………………………….. 15
Collecting soot when sweeping the chimney ……………………… 15
Installation instructions
Fuga M specifications ……………………………………..………… 16
General instructions and regulations ………………………………. 17
Safety recommendations ……………………………………………. 17
Materials and tools required ………………………………………… 17
Installation diagrams ………………………………………………… 17
Quick Guide ………………………………………………………….. 20
Declaration of Performance ……………………………………………….. 21
Harrie Leenders Fuga M - Instructions for Installation, Use and Maintenance
4
1. Door
2. Ceramic glass
3. Aeration slide
4. Base
5. Convection pipes
6. Convection fins
7. Door handle
8. Smoke baffle plate
Harrie Leenders Fuga M - Instructions for Installation, Use and Maintenance
5
Dimensions in mm
Harrie Leenders Fuga M - Instructions for Installation, Use and Maintenance
6
General instructions and regulations
Maintenance
Have the appliance serviced regularly by a qualified technician.
Ensure that the flue-gas connection and the chimney are cleaned regularly.
Check to ensure that the chimney is still open before lighting the stove again if it has not been
used for an extended period of time.
If, in spite of the precautions taken, there should occur a chimney fire (usually
accompanied by a roaring noise in the chimney), proceed as follows:
Shut off the air supply and close the door of the stove immediately
Call the fire brigade
Quickly extinguish the fire in the stove with sand to prevent smoke from getting into your house
Ventilate the house
Never use water to extinguish the fire
Ensure that after a fire the chimney is first swept and inspected for any damage and leaks.
Service
It is not allowed to make any modifications to the appliance without prior authorization of the
manufacturer.
Only use replacement parts recommended by the manufacturer.
Declaration
The undersigned, representing the following:
Harrie Leenders Haardkachels, Industrieweg 25, 5688 DP, Oirschot, Nederland
herewith declare that the product Fuga M is in conformity with the provisions of the following EC
Directives when installed in accordance with the installation instructions contained in the product
documentation: EN 13240:2001/A2:2004 (E) "Roomheaters fired by solid fuel"
Product: Roomheaters fired by solid fuels as covered under the scope of this standard intended
use: Space heating in residential buildings.
Characteristics Report
Fire safety 2005PMC/12
Emission of combustion products 2005PMC/12
Release of dangerous substance 2005PMC/12
Surface temperature 2005PMC/12
Mechanical resistance (to carry a chimney / flue) 2005PMC/12
Thermal output / energy efficiency 2005PMC/12
Description of the room heater Fuga M:
Wood stove made of sheet metal. The stove is designed to be installed on the wall. It is provided
with a self-closing window door, fixed secondary air supply and controllable air wash air
supply. The combustion chamber is insulated with refractory ceramic elements. The flue-gas
connection is located at the top of the appliance.
Notified body: SGS Environmental Services, Postbus 5252, 6802 EG Arnhem
Report number: 2005PMC/12
Manufacturer: Harrie Leenders Haardkachels
Name: Bart Leenders
Position: General Manager
Date: 15-07-2005
Harrie Leenders Fuga M - Instructions for Installation, Use and Maintenance
7
READ THE INSTRUCTION BOOKLET AND THESE SUPPLEMENTARY
INSTRUCTIONS CAREFULLY BEFORE INSTALLATION
These instructions together with those in the instruction booklet cover the basic principles
to ensure the satisfactory installation of the stove, although detail may need slight
modification to suit particular local site conditions.
In all cases the installation must comply with current Building Regulations, Local Authority
Byelaws and other specifications or regulations as they affect the installation of the stove.
It should be noted that the Building Regulations requirements may be met by adopting the
relevant recommendations given in British Standards BS 8303, BS EN 15287-1:2007 as an
alternative means to achieve an equivalent level of performance to that obtained following
the guidance given in Approved Document J.
Please note that it is a legal requirement under England and Wales Building Regulations
that the installation of the stove is either carried out under Local Authority Building
Control approval or is installed by a Competent Person registered with a Government
approved Competent Persons Scheme. HETAS Ltd operate such a Scheme and a listing of
their Registered Competent Persons can be found on their website at www.hetas.co.uk.
CO Alarms:-
Building regulations require that when ever a new or replacement fixed solid fuel or wood/
biomass appliance is installed in a dwelling a carbon monoxide alarm must be fitted in the
same room as the appliance. Further guidance on the installation of the carbon monoxide
alarm is available in BS EN 50292:2002 and from the alarm manufacturer’s instructions.
Provision of an alarm must not be considered a substitute for either installing the
appliance correctly or ensuring regular servicing and maintenance of the appliance and
chimney system.
HEALTH AND SAFETY PRECAUTIONS
Special care must be taken when installing the stove such that the requirements of the Health and Safety at
Work Act are met.
Handling
Adequate facilities must be available for loading, unloading and site handling.
Fire Cement
Some types of fire cement are caustic and should not be allowed to come into contact with the skin. In
case of contact wash immediately with plenty of water.
Asbestos
This stove contains no asbestos. If there is a possibility of disturbing any asbestos in the course of installation then please seek specialist guidance and use appropriate protective equipment.
Metal Parts
When installing or servicing this stove care should be taken to avoid the possibility of personal injury.
STOVE PERFORMANCE
Please refer to the table in the main instruction manual for details of the stoves’ performances
Loading...