Thank you for your purchase. The box you received should include the following.
Please contact our Customer Service Department at 1-(800)-835-4099 if any parts are missing.
A- One nylon frame and
casters – preassembled by the
factory
C- Four bolts
Part # HDB.375x1.500
D- Four nuts
Part # HDNFL.375
E- One axle (Taped to the
side of the frame)
Part # AX 1/2N15
PARTS LIST:
B- One base plate
Part # PBSABLK-1
F- Two wheels
Part # WH 22
G- Two washers
Part # HDW.500x1
H- Two cotter pins
Part # HDP.125x.75
I- Two locking pins
Part # HDPLP.187
J- One handle
Part # FPPGDY-8
BASE PLATE ASSEMBLY INSTRUCTIONS
1) Slide the base plate (Part B) over the nylon frame (Part A) and align bolt holes.
2) Insert 4 bolts (Part C) through the base plate, and the frame.
3) Using 4 Nuts (Part D), finger tighten the nuts, and bolts, to secure the base plate to the frame.
Harper Trucks, Inc.
PJD Nylon Junior Convertible Series
Parts List, and Assembly Instructions
1 2 3
WHEEL AND AXLE ASSEMBLY INSTRUCTIONS
1) Push axle (Part E) through the holes in the frame so the axle ends are protruding from the
frame equally.
2) Place a wheel (Part F) on the axle with a washer (Part G) on the outside of the wheel.
Secure the wheel, and washer, by inserting the cotter pin (Part H) through the holes in the axle.
3) Use pliers to bend back the long end of the cotter pin at least 45 degrees. Repeat process
with the second wheel.
HANDLE ASSEMBLY INSTRUCTIONS
1) Insert the handle (Part J) into the desired vertical, or horizontal frame holes.
2) Insert the handle pins (Part I), through the frame, and holes in the handle, until they lock
into the plastic clips.
3) Complete assembly by tightening the nuts and bolts on the base plate using a combination
of two, 9/16 end wrenches, socket wrenches, pliers, or a crescent wrench.
1 2 3
FOR REPAIR PARTS, OR ASSEMBLY ASSISTANCE, CONTACT:
Customer Service Toll Free : 1-800-835-4099
Email: Support@harpertrucks.com
1 1
2 2
3
Loading...