Harmonic Resolution Systems Damping Plate User Manual

HARMONIC RESOLUTION SYSTEMS

HRS DAMPING PLATE Mk II

Introduction

Thank you for purchasing the Harmonic Resolution Systems (HRS) Damping Plate Mk II. When used properly, it
will give you many years of superior musical or video signal reproduction. The HRS Damping Plates significantly
reduce the negative impact of air and structure borne vibration on your audio or video component performance.
The HRS Damping Plates are a perfect match for the HRS Isolation Base. While the damping plates work to
significantly reduce air-borne vibration, the isolation base significantly reduces the harmful effects of structure­borne vibration.

Safety Instructions IMPORTANT!

Do not place any tall objects on the damping plate. A tall object is any object that has a height greater than its
own width or length. The object may become unstable and tip over.

Do not place the damping plate over ventilation holes of any electronic component. The ventilation holes will be
blocked and the internal operating temperature of the component will be increased.

Set Up Instructions

The HRS Damping Plates should be placed directly on top of an electronic component chassis or speaker cabinet
with the soft side of the damping plate in contact with the component surface. The greater the surface area
covered by the damping plates the greater the improvement in audio/video performance.

Specifications

HRS Damping Plate Physical Characteristics

Model Number

Dimensions
inch (cm)

Weight
lbs. (Kg)

DPII-05545

5.5 x 4.5 x 0.7
(14.0 x 11.4 x 1.8)

1.1 (0.5 )

DPII-09545

9.5 x 4.5 x 0.7
(24.1 x 11.4 x 1.8)

2.0 (0 .9)

DPII-14545

14.5 x 4.5 x 0.7
(36.8 x 11.4 x 1.8)

3.1 (1. 4 )

Care and Maintenance

The HRS Damping Plates are a very low maintenance item that will provide many years of trouble free
performance by applying these basic care instructions.

Clean the Damping Plates using a lint-free soft (non-abrasive) cloth. Use a damp cloth with water or mild soap if
required. Do not spray with or immerse in water.

Warnings!

Do not place objects with sharp or pointed feet directly on the damping plates as they may cause nicks, scratches
or gouges in the surface.

Do not use an abrasive cleaner or abrasive sponge to clean the damping plates, as they may scratch the metallic
surface.

Do not wash with any solvent based cleaning solutions.

Warranty

Limited Five Year Warranty

Harmonic Resolution Systems Inc. warrants to the purchaser that each HRS Damping Plate Mk II is free of
manufacturing defects for a period of five (5) years from the date of purchase. This warranty is subject to the
following conditions and limitations.

1. A copy of the original purchase receipt from a certified Harmonic Resolution Systems Inc. authorized retailer
is used to verify the date of original purchase and ownership.

2. This warranty is void and inapplicable if the product has been handled other than in accordance with the
instruction specified within this document, abuse or misused, damaged by accident or neglect or in being
transported, or the defect is due to the product being tampered with, modified or repaired by anyone other
then Harmonic Resolution Systems.

3. Warranty does not cover normal recommended care and maintenance.

4. Harmonic Resolution Systems Inc. shall not be responsible in any way for consequential or indirect damages
or liabilities resulting from the use of the product covered herein or resulting from any breach of this warranty
or any implied warranty relating to said product.

During this period, Harmonic Resolution Systems Inc. will repair or replace any defective components free of
charge. A Return Authorization Number (RA Number) is required before any product is returned to Harmonic
Resolution Systems Inc. for any reason. This number must be visible on the exterior of the shipping container(s)
for Harmonic Resolution Systems Inc. to accept the return.

Units shipped to Harmonic Resolution Systems Inc. without a visible RA Number on the exterior of the shipping
container(s) are subject to be returned to the sender, freight collect.

Units to be repaired by Harmonic Resolution Systems Inc. must be sent shipping and insurance prepaid by the
original purchaser in the original packaging material. A returned product should be accompanied by a written
description of the defect. Repaired units will be returned by Harmonic Resolution System Inc shipping and
insurance prepaid.

All other warranties or conditions either written or implied are void.

HARMONIC RESOLUTION SYSTEMS INC.

2495 Main Street, Suite 355

Buffalo, NY 14214

Telephone: [phone]

Web: www.avisolation.com

E-mail: [e-mail]