NOTE: The 8.4A and 8.4AN appearance is the same, but
the listed features provide the differences.
• Navigation-Ready, see your dealer for details
• Hands-free/Bluetootht
• Touchscreen Climate Controls
• SiriusXM™
• Embedded Connectivity (US Market Only)
Uconnect™ 8.4AN
Key Features
• 8.4” Touch-Screen
• Navigation Standard
• Hands-free/Bluetootht
• Touchscreen Climate Controls
• HD Radio
• SiriusXM™
Uconnect™ ACCESS USER’S MANUAL 5
• SiriusXM™ Traffic
• Embedded Connectivity (US Market Only)
1
6 Uconnect™ ACCESS USER’S MANUAL
Safety Guidelines
WARNING!
• Stop use immediately if a problem occurs. Failure to
do so may cause injury or damage to the product.
Return it to your authorized dealer to repair.
ALWAYS drive safely with your hands on the wheel.
You have full responsibility and assume all risks
related to the use of the Uconnect™ features and
applications in this vehicle. Only use Uconnect™
when it is safe to do so. Failure to do so may result in
an accident involving serious injury or death.
Ensure that all persons read this manual carefully before
using the radio system. It contains instructions on how to
use the system in a safe and effective manner.
Please read and follow these safety precautions. Failure
to do so may result in injury or property damage.
• Glance at the screen only when necessary and safe to
do so. If prolonged viewing of the screen is necessary,
park in a safe location and set the parking brake.
• Make certain that the volume level of the system is set
to a level that still allows you to hear outside traffic
and emergency vehicles.
Safe Usage of the Uconnect™ Access System
• Read all instructions in this manual carefully before
using your system to ensure proper usage!
• Your system is a sophisticated electronic device. Do
not let young children use your system.
• Permanent hearing loss may occur if you play your
music or the system at loud volumes. Exercise caution
when setting the volume on your system.
• Driving is a complex activity that requires your full
attention. If you’re engaged in driving or any activity
that requires your full attention, we recommend that
you not use your system.
NOTE: Many features of this system are speed dependent. For your own safety, it is not possible to use some
of the touch screen features while the vehicle is in
motion.
Uconnect™ ACCESS USER’S MANUAL 7
• Do not spray any liquid or caustic chemicals directly
on the screen! Use a clean and dry micro fiber lens
cleaning cloth in order to clean the touch screen.
• If necessary, use a lint-free cloth dampened with a
cleaning solution, such as isopropyl alcohol, or an
isopropyl alcohol and water solution ratio of 50:50. Be
sure to follow the solvent manufacturer’s precautions
and directions.
1
• Keep drinks, rain, and other sources of moisture away
from your system. Besides damage to your system,
moisture can cause electric shocks as with any electronic device.
Touch Screen
• Do not touch the screen with any hard or sharp objects
(pen, USB stick, jewelry, etc.) which could scratch the
touch screen surface!
Disc Drive
• Do not insert any damaged, warped, scratched or dirty
Discs into the Disc player.
• Discs that have been modified with an adhesive label
should not be used in the Disc player.
• Do not insert more than one Disc at a time into the
drive slot.
FCC Declaration
8 Uconnect™ ACCESS USER’S MANUAL
This device complies with Part 15 of the FCC Rules and
with Industry Canada license-exempt RSS standard(s).
Operation is subject to the following two conditions: (1)
this device may not cause harmful interference, and (2)
this device must accept any interference received, including interference that may cause undesired operation.
Le présent appareil est conforme aux CNR d’Industrie
Canada applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions
suivantes: (1) l’appareil ne doit pas produire de brouillage, et (2) l’utilisateur de l’appareil doit accepter tout
brouillage radioélectrique subi, même si le brouillage est
susceptible d’en compromettre le fonctionnement.
NOTE: This equipment has been tested and found to
comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that
interference will not occur in a particular installation.
If this equipment does cause harmful interference to
radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged
to try to correct the interference by one or more of the
following measures: - Increase the separation between
the equipment and receiver. - Consult the dealer or an
experienced radio technician for help.
Safety Information
Exposure to Radio Frequency Radiation
Uconnect™ ACCESS USER’S MANUAL 9
The radiated output power of the this internal wireless
radio is far below the FCC radio frequency exposure
limits. Nevertheless, the wireless radio shall be used in
such a manner that the radio is 20 cm or further from the
human body.
The internal wireless radio operates within guidelines
found in radio frequency safety standards and recommendations, which reflect the consensus of the scientific
community.
The radio manufacturer believes the internal wireless
radio is safe for use by consumers. The level of energy
emitted is far less than the electromagnetic energy emitted by wireless devices such as mobile phones. However,
the use of wireless radios may be restricted in some
situations or environments, such as aboard airplanes. If
you are unsure of restrictions, you are encouraged to ask
for authorization before turning on the wireless radio.
1
10 Uconnect™ ACCESS USER’S MANUAL
Uconnect™ Access Overview
Uconnect™ Access (Available on Uconnect™ 8.4A and
Uconnect™ 8.4AN)
With Uconnect™ Access, owners have emergency and
remote vehicle features available. These features include
9-1-1 Call, Roadside Assistance, Uconnect™ Care and
Vehicle Care. With the Uconnect™ Access, your vehicle is
also capable of remote vehicle features like Remote Start,
Remote Door Lock/Unlock, and Remote Horn and
Lights. Once registered, Uconnect™ Access customers
can purchase packages and apps at any time. For additional information, contact Uconnect™ Customer Care at
855-792-4241, or visit Owner Connect (www.MoparOwnerConnect.com).
How to Register with Uconnect™ Access:
1. With the vehicle parked and the radio powered on,
select the “Apps” soft-key located near the bottom of
the radio touch screen.
2. Select the “Uconnect Registration” App soft-key from
the Apps list.
3. The Uconnect™ Registration App will open and pro-
vide step-by-step instructions on how to enter your
email address to begin the registration process.
4. You will receive a secured registration email from
Uconnect™ Access containing a link for completing
your Uconnect™ Access Registration on-line. For security reasons, this email link will be valid for 24
hours.
5. Follow the link to complete the final step of registra-
tion and to begin using Uconnect™ Access
For additional registration assistance while in the vehicle,
push the ASSIST button to contact Uconnect™ Customer
Care.
Uconnect™ Access In-Vehicle Assistance
Features
With Uconnect™ Access, your vehicle has an on-board
assistance feature located on the rear view mirror designed to enhance your driving experience if you should
ever need assistance or support.
Uconnect™ ACCESS USER’S MANUAL 11
1
Assist Call button
ASSIST Call
The rear view mirror contains an ASSIST push button
which automatically connects the vehicle occupants to
one of several predefined destinations for immediate
support:
12 Uconnect™ ACCESS USER’S MANUAL
1. Roadside Assistance Call – If you get a flat tire, or need
a tow, you’ll be connected to someone who can help
anytime. Roadside Assistance will know what vehicle
you’re driving and its location. Additional fees may
apply for roadside Assistance.
2. Uconnect™ Customer Care – In-vehicle support for
Uconnect™ Access System, Apps and Features.
3. Vehicle Customer Care – Total support for your
Chrysler Group vehicle.
9–1–1 Call button
9–1–1 Call
Places a direct call to local 9–1–1 emergency authority.
Uconnect™ Access In-Vehicle Connectivity
Services
Uconnect™ Access brings the power of the internet into
your vehicle with exciting features, remote capabilities,
theft alarm notification, and stolen vehicle assistance
applications through on-board connectivity service. Once
registered with Uconnect™ Access, you can customize
the capabilities of your vehicle system using your
Uconnect™ Access account from the vehicle, the web, or
your Smartphone.
Please refer to your Uconnect™ Access account for
information on available subscriptions, applications and
packages for your vehicle. For additional information,
contact Uconnect™ Customer Care at 855-792-4241, or
visit Owner Connect (www.MoparOwnerConnect.com).
Uconnect™ Access Additional Information
My Uconnect™ Account
Uconnect™ ACCESS USER’S MANUAL 13
To use the Uconnect™ Features and Services, you must
first register your vehicle with Uconnect™ Access. Please
refer to the “Register with Uconnect Access” section of
this User’s Manual to start registration. Once registered,
you can personalize your vehicle Uconnect™ System as
desired.
How to Purchase or Cancel an App
From your Uconnect™ Access Account, you can easily
purchase or cancel Applications or subscriptions. Simply
log-in to your Uconnect™ Access Account and visit your
Uconnect™ Store.
Correcting a Download Error - How to Reset the
Uconnect™ Access System
You can easily correct any App related issues by resetting
the App. Simply log-in to your Uconnect™ Access Account and visit the Uconnect™ Store, click on My Apps,
click on Settings, and then choose Reset/Reinstall. In
minutes your App will be reinstalled and ready to go.
1
14 Uconnect™ ACCESS USER’S MANUAL
Selling my Vehicle - How to Completely Remove My
Uconnect™ Account
To completely remove your Uconnect™ Account, simply
log-in to your Uconnect™ Account and visit the
Uconnect™ Store, click on My Apps, click on Settings,
and then choose Remove Uconnect™ Account. In minutes your entire Uconnect™ Account and information
will be removed from your vehicle.
For further assistance call 855-792-4241, or go to the
Mopar Owner Connect site at (www.MoparOwnerConnect.com).
Uconnect™ 3.0
Uconnect™ 3.0 System
Uconnect™ ACCESS USER’S MANUAL 15
Press the RADIO hard-key to enter the Radio Mode. The
different tuner modes; AM, FM and SXM can be selected
by touching the corresponding soft-keys in the Radio
Mode.
2. INFO
Press the INFO button for an RDS station (one with call
letters displayed). The radio will return a Radio Text
message broadcast from an FM station (FM mode only).
3. A-B-C
Press the A-B-C hard-key to select the A, B or C preset
list.
4. ENTER/BROWSE & TUNE/SCROLL
1
1. RADIO
Press the ENTER/BROWSE button to accept a highlighted selection on the screen. Rotate the TUNE/
SCROLL rotary knob to scroll through a list or tune a
radio station.
16 Uconnect™ ACCESS USER’S MANUAL
5. SEEK UP
Press the Seek Up soft-key to tune the radio to the next
listenable station or channel.
6. BACK
Press the BACK button to return to a previous menu or
screen.
7. MENU
Press the MENU button allows to scroll between the
setting sub-menus.
8. PLAY/PAUSE/MUTE
Press to Play, Pause or Mute the music.
9. AUDIO
Press the AUDIO button to adjust the Bass, Mid Range,
Treble, Balance or Fade.
10. SEEK DOWN
Press the Seek Down soft-key to tune the radio to the
previous listenable station or channel.
11. ON/VOLUME
Push the ON/VOLUME control knob to turn on the
radio. Push the ON/VOLUME control knob a second
time to turn off the radio.
The electronic volume control turns continuously (360
degrees) in either direction without stopping. Turning the
ON/VOLUME control knob to the right increases the
volume and to the left decreases it.
12. PRESETS 1–6
These buttons tune the radio to the stations that you
commit to pushbutton memory AM (A, B, C), FM (A, B,
C) and Satellite — 18 AM, 18 FM and 18 SAT stations.
13. MEDIA
Pressing the MEDIAbutton will allow you to switch from
AM/FM modes to Media mode (CD, USB/iPOD, AUX,
Bluetooth).
Radio Mode
The radio is equipped with the following modes:
• FM
• AM
• SXM Sirius XM™ Satellite Radio (if equipped)
Touch the RADIO button, to enter the Radio Mode. The
different tuner modes; AM, FM, and SXM, can then, be
selected by touching the corresponding soft-keys in the
Radio mode.
ON/OFF & Volume Control
• Push the ON/OFF Volume control knob to turn on the
radio. Push the ON/OFF Volume control knob a
second time to turn off the radio.
Uconnect™ ACCESS USER’S MANUAL 17
• When the audio system is turned on, the sound will be
set at the same volume level as last played.
Enter/Browse & Tune/Scroll Control
• Turn the rotary TUNE/SCROLL control knob clockwise to increase or counterclockwise to decrease the
radio station frequency. Push the ENTER/BROWSE
button to choose a selection.
Seek Functions
Seek Up
• Touch and release the Seek Up button to tune the radio
to the next listenable station or channel.
• During a Seek Up function, if the radio reaches the
starting station after passing through the entire band
two times, the radio will stop at the station where it
began.
Seek Down
1
18 Uconnect™ ACCESS USER’S MANUAL
• Touch and release the Seek Down button to tune the
radio to the next listenable station or channel.
• During a Seek Down function, if the radio reaches the
starting station after passing through the entire band
two times, the radio will stop at the station where it
began.
Setting Presets
The Presets are available for all Radio Modes, and are
activated by touching any of the six Preset buttons.
When you are receiving a station that you wish to
commit into memory, press and hold the desired numbered button for more that 2 seconds or until you hear a
confirmation beep.
The Radio stores up to 18 presets in each of the Radio
modes. Press the A-B-C hard-key to select the A, B or C
preset list.
SiriusXM™ Satellite Radio Mode
SiriusXM™ Satellite Radio uses direct satellite-to-receiver
broadcasting technology to provide clear digital sound,
coast to coast. The subscription service provider is SiriusXM™ Satellite Radio. This service offers over 130
channels of music, sports, news, entertainment, and
programming for children, directly from its satellites and
broadcasting studios. A one-year SiriusXM™ Satellite
Radio subscription is included.
SiriusXM™ and all related marks and logos are trademarks of SiriusXM™ Radio Inc. and its subsidiaries.
SiriusXM™ Satellite Radio requires a subscription, sold
separately after trial subscription included with vehicle
purchase. Prices and programming are provided by
SiriusXM™ and are subject to change. Subscriptions
governed by Terms & Conditions available at sirius.com/
serviceterms. SiriusXM™ Radio U.S. service only available to those at least 18 years of age in the 48 contiguous
United States, D.C., and PR. Service available in Canada;
see www.siriuscanada.ca.
This functionality is only available for radios equipped
with a Satellite receiver. In order to receive satellite radio,
the vehicle needs to be outside with a clear view to the
sky.
If the screen shows Acquiring Signal, you might have to
change the vehicle’s position in order to receive a signal.
In most cases, the satellite radio does not receive a signal
in underground parking garages or tunnels.
Audio
1. Press the AUDIO button at the button of the radio.
2. The Audio Menu shows the following options for you
to customize your audio settings.
Mid, Bass, Fade, Balance
• Select the desired setting to adjust, then touch the
Enter/Browse button. Turn the Tune/Scroll knob to
adjust the setting + or - 9. Press the back button when
done.
Uconnect™ ACCESS USER’S MANUAL 19
Clock Setting
1. Press the Menu button at the bottom of the radio, next
select the Time Format setting and then select Set
Time.
2. Adjust the hours or minutes by turning the Tune/
Scroll knob, then pressing the Enter/Browse button to
move to the next entry. You can also select 12hr or 24hr
format by turning the Tune/Scroll knob, then pressing
the Enter/Browse button on the desired selection.
3. Once the time is set press the “Back” button to exit the
time screen.
Media Mode
Media Mode is entered by touching the Media button
located on the side of the display. Once in Media Mode,
select your media Source by rotating the Scroll rotary
knob and pushing the Enter button.
Common Media Functions
1
20 Uconnect™ ACCESS USER’S MANUAL
Seek Up/Down
Touch and release the right arrow soft-key for the next
selection. Touch and release the left arrow soft-key to
return to the beginning of the current selection, or return
to the beginning of the previous selection if the Disc is
within the first second of the current selection.
Fast Seek Up: Touch and hold the right arrow soft-key
and the desired mode will begin to fast forward through
the current track until the soft-key is released.
Fast Seek Down: Touch and hold the left arrow soft-key
and the desired mode will begin to rewind through the
current track until the soft-key is released.
Source
Touch the Source soft-key to select the desired audio
source, Disc, AUX or USB/iPodt. This screen will time
out after a few seconds and return to the main radio
screen if no selection is made.
Info
Touch the Info soft-key to display the current track
information. Touch the “X” soft-key to cancel this feature.
Shuffle
Touch the shuffle soft-key to play the selections on the
USB/iPodt device in random order to provide an interesting change of pace. Touch the soft-key a second time to
turn this feature off.
Audio
Refer to Radio Mode for adjusting the audio settings.
Disc Mode
If equipped, your vehicle may have a remote Disc player
located in the lower center console storage bin.
Disc Mode is entered by either inserting a Disc or by
touching the Media button located on the side of the
display. Once in Media Mode, select Disc mode.
Inserting Compact Disc
Gently insert one Disc into the Disc player with the Disc
label following the illustration indicated on the player.
The Disc will automatically be pulled into the Disc player
and the Disc icon will illuminate on the radio display. If
a Disc does not go into the slot more than 1.0 in (2.5 cm),
a disc may already be loaded and must be ejected before
a new Disc can be loaded.
If you insert a Disc with the ignition ON and the radio
ON, the unit will switch to CD/Disc mode and begin to
play when you insert the Disc. The display will show the
track number, and index time in minutes and seconds.
Play will begin at the start of track 1.
Browse
Touch the browse soft-key to scroll through and select a
desired track on the Disc. Touch the exit soft-key if you
wish to cancel the browse function.
Uconnect™ ACCESS USER’S MANUAL 21
Eject Button – Ejecting a Disc
Press the EJECT button to eject the Disc. If you have
ejected a Disc and have not removed it within 10 seconds,
it will be reloaded. If the Disc is not removed, the radio
will reinsert the Disc but will not play it.
A Disc can be ejected with the radio and ignition OFF.
USB/iPodt Mode
USB/iPodt Mode is entered by either inserting a USB
Jump Drive or iPodt cable into the USB port or by
touching the Media button located left of the display.
Once in Media Mode, touch the source soft-key and select
USB/iPodt.
Inserting USB/iPodt Device
Gently insert the USB/iPodt device into the USB Port. If
you insert a USB/iPodt device with the ignition ON and
the radio ON, the unit will switch to USB/iPodt mode
and begin to play when you insert the device. The
1
22 Uconnect™ ACCESS USER’S MANUAL
display will show the track number, and index time in
minutes and seconds. Play will begin at the start of track
1.
Browse
Touch the Browse soft-key to select Artist, Albums,
Genres, Songs, Playlists or Folders from the USB/iPodt
device. Once the desired selection is made you can chose
from the available media by touching the soft-key. Touch
the exit soft-key if you wish to cancel the browse function.
AUX Mode
AUX Mode is entered by inserting a AUX device using a
cable with a 3.5 mm audio jack into the AUX port or by
touching the Media button located left of the display.
Once in Media Mode, touch the source soft-key and select
AUX.
Inserting Auxiliary Device
Gently insert the Auxiliary device cable into the AUX
Port. If you insert a Auxiliary device with the ignition ON
and the radio ON, the unit will switch to AUX mode and
begin to play when you insert the device cable.
Controlling the Auxiliary Device
The control of the auxiliary device (e.g., selecting playlists, play, fast forward, etc.) cannot be provided by the
radio; use the device controls instead. Adjust the volume
with the ON/OFF VOLUME rotary knob, or with the
volume of the attached device.
NOTE: The vehicle radio unit is acting as the amplifier
for audio output from the Auxiliary device. Therefore if
the volume control on the Auxiliary device is set too low,
there will be insufficient audio signal for the radio unit to
play the music on the device.
Uconnect™ 5.0
Uconnect™ 5.0 System
Uconnect™ ACCESS USER’S MANUAL 23
Press the RADIO hard-key to enter the Radio Mode. The
different tuner modes; AM, FM and SXM can be selected
by touching the corresponding soft-keys in the Radio
Mode.
2. COMPASS
Press the COMPASS hard-key to display the current
direction of the vehicle.
3. SETTINGS
Press the SETTINGS hard-key to access the Settings list.
Clock, Display, Audio, Bluetooth and Sirius Settings are
described in this manual.
4. MORE
1
1. RADIO
Press the MORE hard-key to access additional options.
5. ENTER/BROWSE & TUNE/SCROLL
24 Uconnect™ ACCESS USER’S MANUAL
Press the ENTER/BROWSE button to accept a highlighted selection on the screen. Rotate the TUNE/
SCROLL rotary knob to scroll through a list or tune a
radio station.
6. BACK
Press the BACK button to return to a previous menu or
screen.
7. SCREEN OFF
Press the SCREEN OFF hard-key to turn the touch-screen
OFF. To turn the screen back ON, just touch the screen.
8. VOLUME & MUTE
Rotate the rotary knob to adjust the Volume. Press the
Mute button to mute the system.
9. PHONE
Press the Phone button to access the Uconnect™ Phone
feature.
10. MEDIA
Pressing the MEDIA button will allow you to switch to
Media mode (CD, USB/iPOD, AUX, Bluetooth).
Radio Mode
The radio is equipped with the following modes:
• FM
• AM
• SXM Sirius XM™ Satellite Radio (if equipped)
Touch the RADIO hard-key, to enter the Radio Mode. The
different tuner modes; AM, FM, and SXM, can then, be
selected by touching the corresponding soft-keys in the
Radio mode.
Volume & Mute
• Rotate the rotary knob to adjust the Volume. When the
audio system is turned on, the sound will be set at the
same volume level as last played.
• Press the Mute button to mute the system. Press the
Mute button again to un-mute the system.
Enter/Browse & Tune/Scroll Control
• Turn the rotary TUNE/SCROLL control knob clockwise to increase or counterclockwise to decrease the
radio station frequency. Push the ENTER/BROWSE
button to choose a selection.
Seek Functions
Seek Up
• Touch and release the Seek Up soft-key to tune the
radio to the next listenable station or channel.
Uconnect™ ACCESS USER’S MANUAL 25
• During a Seek Up function, if the radio reaches the
starting station after passing through the entire band
two times, the radio will stop at the station where it
began.
Fast Seek Up
• Touch and hold the Seek Up soft-key to advance the
radio through the available stations or channels at a
faster rate, the radio stops at the next available station
or channel when the soft-key is released.
Seek Down
• Touch and release the Seek Down soft-key to tune the
radio to the next listenable station or channel.
• During a Seek Down function, if the radio reaches the
starting station after passing through the entire band
two times, the radio will stop at the station where it
began.
Fast Seek Down
1
26 Uconnect™ ACCESS USER’S MANUAL
• Touch and hold the Seek Down soft-key to advance the
radio through the available stations or channel at a
faster rate, the radio stops at the next available station
or channel when the soft-key is released.
Setting Presets
The Presets are available for all Radio Modes, and are
activated by touching any of the four Preset soft keys,
located at the top of the screen.
When you are receiving a station that you wish to
commit into memory, press and hold the desired numbered soft-key for more that 2 seconds or until you hear
a confirmation beep.
The Radio stores up to 12 presets in each of the Radio
modes. 4 presets are visible at the top of the radio screen.
Touching the “all” soft-key on the radio home screen will
display all of the preset stations for that mode.
SiriusXM™ Satellite Radio Mode
SiriusXM™ Satellite Radio uses direct satellite-to-receiver
broadcasting technology to provide clear digital sound,
coast to coast. The subscription service provider is SiriusXM™ Satellite Radio. This service offers over 130
channels of music, sports, news, entertainment, and
programming for children, directly from its satellites and
broadcasting studios. A one-year SiriusXM™ Satellite
Radio subscription is included.
SiriusXM™ and all related marks and logos are trademarks of SiriusXM™ Radio Inc. and its subsidiaries.
SiriusXM™ Satellite Radio requires a subscription, sold
separately after trial subscription included with vehicle
purchase. Prices and programming are provided by
SiriusXM™ and are subject to change. Subscriptions
governed by Terms & Conditions available at sirius.com/
serviceterms. SiriusXM™ Radio U.S. service only available to those at least 18 years of age in the 48 contiguous
United States, D.C., and PR. Service available in Canada;
see www.siriuscanada.ca.
This functionality is only available for radios equipped
with a Satellite receiver. In order to receive satellite radio,
the vehicle needs to be outside with a clear view to the
sky.
If the screen shows Acquiring Signal, you might have to
change the vehicle’s position in order to receive a signal.
In most cases, the satellite radio does not receive a signal
in underground parking garages or tunnels.
Audio
1. Press the SETTINGS hard-key on the right side of the
unit.
2. Then scroll down and press the Audio soft-key to get
to the Audio menu.
3. The Audio Menu shows the following options for you
to customize your audio settings.
Equalizer
Uconnect™ ACCESS USER’S MANUAL 27
• Touch the Equalizer soft-key to adjust the Bass, Mid
and Treble. Use the + or - soft-key to adjust the
equalizer to your desired settings. Press the back
arrow soft-key when done.
Balance/Fade
• Touch the Balance/Fade soft-key to adjust the sound
from the speakers. Use the arrow soft-key to adjust the
sound level from the front and rear or right and left
side speakers. Touch the Center 9C9 soft-key to reset
the balance and fade to the factory setting. Press the
back arrow soft-key when done.
Speed Adjustable
• Touch the Speed Adjusted Volume soft-key to select
between OFF, 1, 2 or 3. This will decrease the radio
volume relative to a decrease in vehicle speed. Press
the back arrow soft-key when done.
Loudness
1
28 Uconnect™ ACCESS USER’S MANUAL
• Touch the Loudness soft-key to select the Loudness
feature. When this feature is activated it improves
sound quality at lower volumes.
Clock Setting
There are two ways to enter the clock setting procedure
on the Uconnect™ 5.0 system.
1. Press the More hard-key on the right side of the
display, next press the Time soft-key and then press
the Set soft-key. OR Press the Settings hard-key on the
right side of the display, then press the Clock soft-key.
The Time setting screen is displayed and the clock can
be adjusted as described in the following procedure.
NOTE: In the Clock Setting Menu you can also select
Display Clock. Display Clock turns the clock display in
the status bar on or off.
2. Touch the Up or Down arrows to adjust the hours or
minutes, next select the AM or PM soft-key. You can
also select 12hr or 24hr format by touching the desires
soft-key.
3. Once the time is set press the “Done” soft-key to exit
the time screen.
Media Mode
Media Mode is entered by touching the Media hard-key
located on the side of the display. Once in Media Mode,
touch Source soft-key and the desired mode soft-key.
Disc, USB, AUX and Bluetooth are the Media sources
available.
Common Media Functions
Seek Up/Down
Touch and release the right arrow soft-key for the next
selection. Touch and release the left arrow soft-key to
return to the beginning of the current selection, or return
to the beginning of the previous selection if the Disc is
within the first second of the current selection.
Fast Seek Up: Touch and hold the right arrow soft-key
and the desired mode will begin to fast forward through
the current track until the soft-key is released.
Fast Seek Down: Touch and hold the left arrow soft-key
and the desired mode will begin to rewind through the
current track until the soft-key is released.
Source
Touch the Source soft-key to select the desired audio
source, Disc, AUX or USB/iPodt. This screen will time
out after a few seconds and return to the main radio
screen if no selection is made.
Info
Touch the Info soft-key to display the current track
information. Touch the “X” soft-key to cancel this feature.
Uconnect™ ACCESS USER’S MANUAL 29
Shuffle
Touch the shuffle soft-key to play the selections on the
USB/iPodt device in random order to provide an interesting change of pace. Touch the soft-key a second time to
turn this feature off.
Audio
Refer to Operating Instructions – Radio Mode for adjusting the audio settings.
Disc Mode
If Equipped, your vehicle may have a remote Disc player
located in the lower center console storage bin.
Disc Mode is entered by either inserting a CD/Disc or by
touching the Media hard-key located on the side of the
display. Once in Media Mode, touch the source soft-key
and select Disc.
Inserting Compact Disc
1
30 Uconnect™ ACCESS USER’S MANUAL
Gently insert one Disc into the Disc player with the Disc
label following the illustration indicated on the player.
The Disc will automatically be pulled into the Disc player
and the Disc icon will illuminate on the radio display. If
a Disc does not go into the slot more than 1.0 in (2.5 cm),
a disc may already be loaded and must be ejected before
a new Disc can be loaded.
If you insert a Disc with the ignition ON and the radio
ON, the unit will switch to Disc mode and begin to play
when you insert the Disc. The display will show the track
number, and index time in minutes and seconds. Play
will begin at the start of track 1.
Browse
Touch the browse soft-key to scroll through and select a
desired track on the Disc. Touch the exit soft-key if you
wish to cancel the browse function.
Eject Button – Ejecting a Disc
Press the EJECT button to eject the Disc. If you have
ejected a Disc and have not removed it within 10 seconds,
it will be reloaded. If the Disc is not removed, the radio
will reinsert the Disc but will not play it.
A Disc can be ejected with the radio and ignition OFF.
USB/iPodt Mode
USB/iPodt Mode is entered by either inserting a USB
Jump Drive or iPodt cable into the USB port or by
touching the Media hard-key located left of the display.
Once in Media Mode, touch the source soft-key and select
USB/iPodt.
Inserting USB/iPodt Device
Gently insert the USB/iPodt device into the USB Port. If
you insert a USB/iPodt device with the ignition ON, the
unit will switch to USB/iPodt mode and begin to play
Loading...
+ 242 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.