Harman MLNO519 Harman Manual

AUDIO PLAYER OWNER’S MANUAL

519

TABLE OF CONTENTS / ABOUT THIS DOCUMENT

TABLE OF CONTENTS

About This Document 1

Special Design Features 2

Installation Considerations 3

Unpacking, Placement and Ventilation, Power Requirements, Operating States, Updates

Getting Started 5

Front-Panel Overview, Rear-Panel Overview, Remote Control Overview

Quick Setup and Listen 10

Remote Control, Initial Connections, A Note about DSD Files, Wi-Fi Setup, Bluetooth Setup, Using Spotify Connect, Using TIDAL, Deezer, and Qobuz

Settings 16

Troubleshooting 19

Specifications 21

ENGLISH

ABOUT THIS DOCUMENT

This Owner’s Manual covers unboxing of, familiarization with, and configuration of your audio player. This manual will enable you to finely tailor the behavior and performance of the unit to fit your preferences and the particulars of your equipment and listening room. It is strongly recommended that you follow this manual in the order in which it is written so that you understand safety considerations before configuring this sophisticated audio player.

N0 519 AUDIO PLAYER / OWNER’S MANUAL

SPECIAL DESIGN FEATURES

Thank you for purchasing a Mark Levinson № 519 audio player. Combining Mark Levinson’s unsurpassed performance with flexible access to virtually all digital music sources stored locally as well as the near-limitless collection of streaming music from online streaming services and radio stations, plus comprehensive output connections for a variety of system configurations including headphones, the № 519 audio player is certain to join you on a lifetime of music enjoyment.

Connected Playback

The № 519 audio players offer a comprehensive selection of music content access thanks to wired and wireless streaming, slot-loading disc player, and high-resolution DAC with multiple inputs. You can play music from streaming services, storage on your home network, connected devices, digital audio players, and continue to enjoy your collection of discs. Convenient Bluetooth wireless audio with high-quality aptX offers an instant wireless music connection (check with your phone’s manufacturer to determine if it supports the aptX feature). The № 519 audio players play virtually all high-resolution audio formats: enjoy up to 32-bit, 192kHz PCM, up to double-speed DSD, FLAC, ALAC, and more.

Proprietary Mark Levinson Signal Path

The audio player’s core is its Mark Levinson proprietary Pure Path discrete, direct coupled, fully balanced, dual-monaural signal path, delivering pure, uncompromising sound quality without restriction, limitation, noise, or coloration. Its ESS SABRE32based digital-to-analog converter features proprietary jitter elimination circuitry, and its fully balanced, discrete I/V circuitry forms the heart of the digital audio processing stage. Six digital audio inputs on the № 519 are provided including one AES/EBU, two coaxial and two optical plus a USB audio processor capable of asynchronous data transfer of high-resolution DSD and PCM. For low-resolution audio formats, proprietary HARMAN ClariFi® music restoration technology reconstructs information and bandwidth lost in compression. A complete embedded Linux computer delivers outstanding performance headroom for flawless performance, regardless of configuration.

Control and Integration

You can control the № 519 audio player from its front panel, featuring a full-color, five-inch TFT LCD display flanked by eight buttons; its metal-housed remote control, apps on your

Apple iOS or Google Android device, any major browser on your computer, and a host of system integration connections including RS-232, triggers, and IR input.

Features

• Mark Levinson proprietary discrete, direct coupled, fully balanced, dual-monaural signal path

• Digital inputs: USB asynchronous (USB type B), two USB mass storage (USB type A), AES/EBU balanced, two Toslink optical, two Coaxial unbalanced

• Network and virtual inputs: Ethernet, Wi-Fi (802.11b/g/n/a), Bluetooth with aptX codec

• Digital outputs: AES/EBU balanced, Toslink optical, Coaxial unbalanced

• Analog outputs: XLR balanced pair, RCA unbalanced pair, 1/4inch (6.3mm) headphone

• Supports high-resolution formats including 32-bit, 192kHz PCM and double-speed DSD (DSD128)

• Supported 2-channel formats: PCM (24/192), DSD64, DSD128, FLAC, ALAC, WAV, MP3, AAC, WMA, OGG, AIFF, WMV; Redbook and data CDs

• Streaming music services natively supported: Spotify Connect, TIDAL, Qobuz, Deezer, internet radio and podcasts (availability may vary by region)

• Mark Levinson DAC featuring the renowned ESS Sabre 32-bit processor

• Front-panel display: 5-inch full-color TFT LCD

• Remote control included, iOS and Android apps, supports all major web browsers

• Housed in steel and 6000-series aluminum chassis

• Designed and handcrafted in the USA

N0 519 AUDIO PLAYER / OWNER’S MANUAL

INSTALLATION CONSIDERATIONS

UNPACKING

When unpacking your player:

• Save all packing materials in case you need to ship your player in the future.

• Inspect your player for signs of damage during shipment. If you discover damage, contact your authorized Mark Levinson dealer for assistance in making appropriate claims.

• Please register your audio player within 15 days of purchase at marklevinson.com.

• Retain your original, dated sales receipt as proof of warranty coverage.

• Remove the accessory box from the shipping carton. Make sure that all of the items listed below are included. If any are missing, contact your authorized Mark Levinson dealer.

o IEC power cord (terminated according to the region to

which the unit is shipped)

o Remote control with preinstalled batteries

o Phillips screwdriver (for replacing remote batteries)

o Pair of white gloves (for use during unpacking and

initial setup)

o Documentation

PLACEMENT AND VENTILATION

• Install the player on a shelf in an open rack, to ensure proper ventilation.

• Ensure that you install the player on a solid, flat and level surface.

• Install the player as close as possible to associated audio components to keep interconnecting cables as short as possible.

• Select a dry, well-ventilated location that is out of direct sunlight.

• DO NOT expose the player to high temperatures, humidity, steam, smoke, dampness, or excessive dust.

POWER REQUIREMENTS

The player is configured at the factory for 100, 115, or 230 VAC power operation at 50Hz or 60Hz. Before operating, ensure that the power label on the rear panel near the AC input connector indicates the correct operating voltage. A detachable IEC power cable intended for use in the region where the unit is sold is included.

Connection to an AC voltage other than that for which the unit is intended can create a safety and fire hazard and may damage the unit. If you have any questions about the voltage requirements for your preamplifier or about the line voltage in your area, contact your authorized Mark Levinson dealer before plugging the unit into an AC power outlet.

WARNING! MAKE SURE all components in the audio system are properly grounded. Do NOT defeat the safety purpose of polarized or grounding-type plugs with “ground-lifter” or “cheater” adapters. Doing so may cause dangerous voltage to build up between components, which may result in personal injuries and/or product damage.

You should unplug the audio player from the AC wall outlet during lightning storms and extended periods of non-use.

CAUTION: BEFORE moving the unit, make sure it is powered off by removing the power cord from the AC power outlet and the unit’s rear panel.

ORIGINAL ANTENNA

The unit’s Wi-Fi antenna cannot be replaced with an alternate. Use of any other antenna is not covered by warranty, may result in degraded performance, and may violate regulations in your country. If you damage or misplace the antenna, replace it with Mark Levinson/HARMAN part number 480-18521.

ENGLISH

N0 519 AUDIO PLAYER / OWNER’S MANUAL

INSTALLATION CONSIDERATIONS

OPERATING STATES

The player has three operating states:

• Off: The AC mains power is disconnected by using the rear-

panel Power switch or by removing the power cord from the rear panel.

• Standby: The Standby mode has three settings that can

be selected via the menu system: Green, Power Save, and Normal.

o Green: This mode removes power from almost all of

the circuits, allowing the unit to be activated only via an IR control signal, a 5V – 12V trigger or a press of the Standby button. This mode provides maximum

power conservation and is the factory-default Standby mode.

o Power Save: This mode removes power from the

audio circuits, but keeps the control and streaming circuitry powered and ready to receive commands. This mode provides moderate power conservation.

o Normal: This mode shuts off the display and mutes its

audio outputs, but keeps all of its control, streaming, and audio circuits powered. This mode provides the least amount of power conservation but allows the audio circuits to remain warmed up to deliver optimal performance at all times.

• On: The entire unit is powered up and all configured outputs

are active.

The player has an Auto Off feature that automatically places it into the Standby mode after 20 minutes of no user control input or audio signal passing through the unit. The factory-default setting for the Auto Off feature is on (engaged). You can disable the Auto Off feature in the menu.

UPDATES

Having the most up to date software on your № 519 is important for the best reliability and function.

Once connected to the internet (See

> Wi-Fi Setup

automatically search for new updates. If new updates are found, the № 519 will notify you via a gear icon present at the top of the screen. To install these updates, navigate to >

Update Firmware > Check for update online.

N0 519 AUDIO PLAYER / OWNER’S MANUAL

for steps on how to connect), your unit will

Quick Setup and Listen

Settings

System

GETTING STARTED

FRONTPANEL OVERVIEW

GETTING STARTED

Input knob

headphones

Headphone

output

connector

Select

button

Settings

button

IR receiver

select

settings

back

Back

Disc Slot

Mute

button

Front-panel controls/indicators

Input knob:

Rotate this knob to select the desired input to send to the outputs. (Note: the Input knob will bypass any input for which the Input has been disabled in the

Settings > Input Setup

menu.)

IR receiver:

the IR receiver receives commands from the included remote control when the unit is not being controlled via its rear-panel IR Input connector (see Rear-Panel Overview for more information). Infrared communication requires lineof-sight between the remote and this “target” on the unit’s front panel.

Bluetooth

receiver

Stop/eject

button

Bluetooth receiver:

Play/pause

play/pause

stop/ejectmute

button

volumeinput

button

Volume/value

knob

AUDIO PLAYER N

standby

Standby

button

the Bluetooth receiver receives the

519

Bluetooth stream from the connected device (phone, tablet, or computer). Bluetooth communication does not require line-ofsight between the device and this receiver on the unit’s front panel, but for best range of distance between the two, line-ofsight is encouraged.

Headphone output connector:

this ¼-inch (6.3mm) TRS phone plug connector provides a line-level stereo signal that can drive headphones up to 32 ohms in Class A. When the unit detects that headphones have been connected, the Balanced and Single-Ended outputs are automatically muted, and the Volume knob switches to control of the Headphone output level. When the unit detects the headphones have been disconnected, the Balanced and Single-Ended outputs are automatically unmuted,

ENGLISH

Standby

LED

N0 519 AUDIO PLAYER / OWNER’S MANUAL

GETTING STARTED

and the Volume knob returns to control of their level.

The balanced and single-ended outputs can be configured in the menu as Fixed (for use with recording components or a second audio zone). When configured as Fixed, the Line outputs are not affected by volume controls.

Select button:

press this button to select an item in a list, or

confirm (“OK”) a menu-item change within the menu system.

Settings button:

press this button to enter the menu system, which you can use to customize the player to suit your other system components, individual preferences and listening space.

Back button:

press this button to move back or “up” one level in the menu system. The Back button does not function during normal operation. The Back button is also used to move the cursor left when manually entering text in settings.

Mute button:

press this button to mute and unmute the level of

the outputs by the amount determined in the menu.

Play/pause button:

press this button to engage playback from stopped or paused state on the current source, or to pause playback if currently playing. The Play/pause button does not function when the Balanced, Optical, or Coaxial inputs are selected.

Stop/eject button:

press this button to stop playback from playing or paused state on the current source, or to eject a disc if the Disc input is currently selected and stopped. The Stop/ eject button does not function when the Balanced, Optical, or Coaxial inputs are selected, and the Eject functions only when Disc is selected and a disc is inserted.

Volume/value knob:

turn this knob to adjust the volume level of the outputs or scroll through items in a list of values when within the Settings menu. The minimum volume level is OFF; the maximum volume level is determined in the menu system. Whenever you select an input, the unit applies the volume offset selected for it in the Setup menu to the output volume level.

Standby button:

press this button to put the unit into and out of the selected Standby mode. The LED illuminates when the unit is On. When the unit is in Standby mode, it flashes slowly.

Next button:

press this button to select the next track in the current source or playlist. The Next button does not control playback when the Balanced, Optical, or Coaxial inputs are selected. The Next button is also used to move the cursor right when manually entering text in settings.

Previous button:

press this button to return to the start of the current track, or if at the start of the current track, to select the previous track in the current source or playlist. The Previous button does not control playback when the Balanced, Optical, or Coaxial inputs are selected.

N0 519 AUDIO PLAYER / OWNER’S MANUAL

+ 16 hidden pages