2 in 1 - On the road and on the go speaker
Owner´s manual
Product Overview
Congratulations for purchase of WIND! To ensure a proper use of WIND
please read this manual before you start to use. Also, please safely keep
this manual for future reference and trouble shooting.
Package Contents
1. 1x WIND BT Speaker main unit
2. 1x USB charging cable
3. 1x Aux cable
4. 1x Carabiner
5. 1x Bracket
1x User's manual
6.
Compatibility
The product is compatible with BT enabled devices, including I phone,
I Pad, I Pod, Android Phone, tablets and etc. It is also compatible with
Features
W ireless and To-Go
Easy connection with your electronic devices wirelessly and use it portably.
The wireless working range is around 8-10 meters (30 feet), no cords and
no hassle.
Hand free calling on-the-go
With a built-in microphone, the unit takes on your calls just free and easy.
2-in-1 design for use in bicycle and backpack
devices which have 3.5mm earphone jack to connect to the product.
2
Carabiner and bicycle bar mounter with bracket are provided for two uses
in carrying it over.
Product Interface
(1) Handle for hanging a carabiner
(2) Play/pause (BT, aux and micro SD / TF), FM Scan and Mute (Radio)
(3) Volume + ( Long press ) - All functions
Next (Short press) - BT, micro SD / TF and radio functions
(4) Volume – ( Long press ) - All functions
Lap (Short press) - BT, micro SD / TF and radio functions
(5) "ON / OFF" and "Source" button (BT, aux, micro SD TF and radio)
(6) Connection for USB charging
(7) AUX input
(8) Micro SD / TF Card
(9) Microphone
(10) LED battery charge indicator
BT connection LED indicator (11)
3
Getting Started
Two easy steps to get your JBL WIND ready to enjoy.
Step 1: Charging before use
Connect your WIND BT Speaker to a USB power source
USB charging cable.
Step 2: Connecting to play
BT connection
As soon as the portable WIND box is turned on, the BT indicator will blink and
signal to confirm that the unit is currently in BT pairing mode. Access the BT
settings on your phone, tablet or computer to locate the device called "JBL
WIND" and press to select. A signal will be issued to confirm that the device
has been satisfactorily paired in seconds. The next time you use the WIND
device, the product will automatically connect to your devices once pairing
has been performed. To disconnect the device, press the "Play / Pause"
button for 5 seconds and it will start pairing a new available device.
As soon as WIND is turned on, press the source select button again, after the
beep, it will start playing the FM radio.
Click the "+" and "-" buttons to advance and return the radios respectively.
When you turn on your JBL WIND for the first time, after playing the radio,
press the "Play / Pause" button up to start scanning th FM radios of your
region as soon as your radio is ready for use.
OBS.: This process needs to be performed only on first use.
FM Radio connection
Direct Connection
The WIND Portable Box can also connect to devices that have a handset
output or a line-out using the AUX cable shipped with the device.
Micro SD / TF card
Play your music through a micro SD / TF card. Click the "source" button to
switch between signal inputs.
4
using the enclosed
Speaker Phone
After paired your mobile phone to
can be used.
Make call : Call will automatically transfer to the speakerphone. If not, tap
play/pause button;
Answer call: Tap play/pause button to answer the incoming call;
Charge
hen the power is low, a beep will comes out fromW
Connect the standard USB end of the supplied USB cable to a USB power 1.
LED indicator will stay on while charging, and goes off after fully charged.
The 4.
As the BT versions for these types of devices vary greatly, the connection methods
will differ as well. If you cannot connect with the WIND BT Speaker using the previous
method instructed, you may need to install a new version of the BT driver.
Please refer the instructions of device for details.
when it is not in a call.
Connection
WIND with BT, the speaker phone function
play/pause button to redial last number Double tapRedial last number:
the speaker, please charge
the speaker when you hear the beep.
;source (like PC, USB power adapter…etc.)
indicator will light up while charging;
for 10 minutes before turn on the unit.
Laptop / notebook / PC
5
on during the call to end the call;End call: Tap play/pause butt
Reject call: Hold play/pause button to reject the incoming call;
n the unit. The charging iConnect the Micro USB jack to the USB charging port 2.
fully charge the BT speaker; tohours 2It will take about 3.
the unit if the unit is not used longer than 7 days, please chargeNote:
Technical parameters
Note: All specifications are subject to change without notice.
Product name: Wind
Power Supply: USB 5V, 1A
Built-in Lithium Ion battery: 3.7V 800mAh
Output power: 3W RMS
BT Profile Supported: A2DP, AVRCP
BT Version: 4.1
Working range: up to 10m
Working atmosphere: 0°C 40°C / 20% 90% RH
Memory card capacity: 32GB
SPL Max: 80dB
IP45 (OBS.: With the connections cover closed)
Maintenance
Do not use alcohol, benzene, thinners or other chemical detergents as
If the unit will not be used for an extended period of time, power off the
Check if the BT indicator light is on. If the indicator light is off, please press
the power button to turn the unit on. If the BT indicator light still doesn't come
on after pressing the power button, please charge the unit.
rage Sto
place
Solution:
Power off the unit first before clear
free cloth to wipe gently-Use a soft, dry, lint
Troubleshooting
instructions below before cleaning the unit: Please follow the
these can cause the casing to be warped or discolored
unit and place the unit with accessories into the package
blank -Do not set the unit in a damp, high temperature or a sun point
successfully after multiple attemptsIssue: Pairing is un
6
Check for other BT devices around the surroundings that may interfere
devices off. with searching and turn
Power off and then power on the unit to restart the BT function of the unit
or your BT device.
Unplug any cables plugged into the AUX IN, restart all devices and then
Solution:
Avoid using the device between concrete or other building structures
Please check if the battery level of the unit and the BT device
Issue: Radios are not working well.
Solution:
Check that the radios have been scanned according to instructions on page 4
attempt pairing again.
Issue: Interference or static during playback
that may interfere with the signal.
and charge if necessary.
This product is specially designed based on the full attention to safety; in
order to make sure the accident
Always position the unit on a stable and level surface. Unstable surface can
Do not place any ware with full water on the top of the unit, such as vase,
Safety Instructions
the guidelines
free operation, please abide by
listed below:
ng the unit nearby basins or sinks where it may come in Avoid usi
contact with water;
-
t from any overheating devices (such as radiator, Protect the using of the uni
7
;cause the unit to topple and fall, resulting in possible damage or injury
Do not drop, unpack, open, beat, curve, prink and burn the unit;
glass, pot, and please avoid placing candle on the speaker surface as well;
heating installation, cooking stove or other heating devices);
Regardless of what reasons cause the unit damage, have the repair
performed only by on authorized JBL dealer or service center;
If you want to do the cleaning, please turn off the unit and unplug the power
cable from the outlet first;
Set the volume properly to prevent injury to the unit and your health;
To prevent possible harm to the environment or human health from
uncontrolled waste disposal, recycle it responsibly to promote the
sustainable reuse of material resources. To return your used device, please
product was purchased. They can take this product for environmental safe
The battery (battery or batteries or battery pack) shall not be exposed to
No naked flame sources, such as lighted candles, should be placed on
CAUTION: Danger of explosion if battery is incorrectly replaced. Replace
and collection systems or contact the retailer where the use the return
recycling.
WARNING:
the apparatus.
This marking indicates that this product . Correct Disposal of this product
sehold wastes throughout the EU. should not be disposed with other hou
ne, fire or the like.excessive heat such as sunshi
only with the same or equivalent type.
8
WIND is designed as multipurpose speaker which includes common
Warning:
and casual use on a bicycle as an entertaining device. We are not liable to risk
in using WIND while you ride on a bicycle for speed racing, BMX performance,
down hill riding, jumping and etc. Please always use WIND on a bike in a manner
of safe riding.
9
HARMAN International Industries, Inc.
Headquarters:
400 Atlantic St.
Stamford, CT 06901 - USA.
www.harman.com
© 2017 HARMAN International Industries, Incorporated. All rights reserved.
Harman do Brasil Industria Eletrônica e Participações Ltda. is a trademark of
Harman International Industries, registered in the United States and/or other
countries. Features, specifications and appearance are subject to change without
notice.
Printed in China
Loading...