Harman JBLBAR21C User Manual

JBL Bar 2.1

2.1-Channel Soundbar with Wireless Subwoofer

Quick Start Guide

Note: For complete information about using all of your JBL Bar 2.1,

download the full Owner’s Manual from www.jbl.com.

What’s in the box

1

Soundbar

Sub-woofer Remote Control

Power Cables* Optical Cable AUX cable

Wall-Mount Brackets Product Information &

Wall-mounted guide

* Power cable numbers varied by regions

Place your soundbar

2

2a. Place the Soundbar on the table

2b. Wall mount the SoundBar

Use tape to stick the wall-mounted paper guide on the wall, push a pen
tip through the center to mark the wall-mounted bracket location and
remove the paper.

TV

2-D=3mm

Screw the wall mount brackets on the pen mark; Fix the screw at the
back of soundbar; then hook the soundbar on the wall.

≤8 mm/

0.31"

4mm/0.16"

≥35 mm/1.4"

Connect your soundbar

3

3a. Connect to your TV

HDMI

3b. Connect to other devices

AUXcable

HDMI

AUX-IN

AUX-OUT

HDMI OUT

HDMI IN / HDMI (ARC)

HDMI (ARC)

HDMI IN HDMI OUT (ARC)

Power your system

4

1

3

Control your soundbar

5

5a. Top Panel

Power

5b. Remote control

1

3

5

8

9

13

15

17

19

Volume

Down

Volume

Up

2

4

7

6

10

11

12

14

16

18

2

Source

1) Power

2) Source

3) Play / Pause

4) Volume +

5) Volume -

6) Previous

7) Next

8) Audio Sync +

9) Audio Snyc -

10) Mute

11) Bass +

12) Bass -

13) Sound mode

14) Soundshift On / off

15) Shuffle / Repeat

16) Surround On / off

17) Night mode On / off

18) Dim display

19) Bluetooth

Bluetooth®connection

6

6a. Press RC Bluetooth button to enter Bluetooth source

PAIRING

6b.

CONNECTED

JBL Bar 2.1

Choose "JBL Bar 2.1" to connect

Remark: Press and hold Remote control Bluetooth button for 3 seconds
if you want to pair another mobile device

JBL SoundShift

7

®

Press RC Soundshift button to enable Soundshift feature.

While Soundshift is on, play and pause your music source
to enjoy auto-switch between your mobile devices (A) and
TV (B).

(A)

(B)

Respond to Your TV Remote Control

8

Use your own TV remote control to control your soundbar

8a. For most Samsung, LG, Sony and Vizio TVs

The soundbar responds to your TV remote control automatically. Press and hold
soundbar remote control SHUFFLE button if you want to disable this feature.

TV REMOTE OFF

>3 s

8b. For other TVs

Please manually program the soundbar to response your TV remote control

step by step. First, press and hold VOLUME+ and SOURCE button to enter

learning mode.

(1)

>5 s

LEARNING

Then, press POWER button on the soundbar and press POWER button on the
TV remote control

(3)

DONE

(2)

Product Specications

9

Follow the same procedure for VOLUME - and

TV

SOURCE

VOLUME + . For mute, press bloth VOLUME +
and VOLUME - button on soundbar and press
MUTE button on TV remote control.
Press and hold VOLUME+ and SOURCE
button on soundbar again and now your
soundbar response to your TV remote control.

Total Maximun Power 300W

Max SPL 99db
Frequency Response 40Hz to 2KHz
HDMI Video Inputs 1
HDMI Video Output

(with Audio Return Channel)

1

Bluetooth Version 3.0
Max Bluetooth Range 32 ft (10m)
Bluetooth Frequency Range 2402MHz-2480MHz
Max Transmitting power 6dbm (EIRP)
Soundbar Maximun Power 100W

Soundbar Transducer Size

Soundbar Dimensions (W x H x D)

4 x 1.75" racetrack drivers
2 x 0.75" tweeter

965 x 58 x 68(mm) \ 38" x 2.3" x 2.7"
Soundbar Weight 2.5kg
Soundbar Power Consumption (standby) <0.5W
Soundbar Power Consumption (max) 60W
Subwoofer Maximun Power

200W
Subwoofer Transducer Size 8” (200mm) 6.5"

5.8G Wireless Frequency Range 5740MHz-5840MHz
Max Transmitting power 20dbm (EIRP)
Subwoofer Dimensions (W x H x D)
Subwoofer Weight
Subwoofer Power Consumption (standby)
Subwoofer Power Consumption (max)
Packaging Dimensions (W x H x D)
Packaging Weight (Gross)

225 x 370 x 225(mm) \ 8.9" x 14.6" x 8.9

6.5kg

<0.5W

60W

1029 x 276 x 363mm

9.66kg

CAUTION:

This equipment is a Class II or double insulated electrical appliance. It has been
designed in such a way that it does not require a safety connection to
electrical earth.

WARNING:

Do not ingest the battery, Chemical Burn Hazard
(The remote control supplied with) This product contains a coin/button cell battery. If

the coin/button cell battery is swallowed, it can cause severe internal burns in just 2
hours and can lead to death.

Keep new and used batteries away from children.
If the battery compartment does not close securely, stop using the product and keep

it away from children.
If you think batteries might have been swallowed or placed inside any part of the body,

seek immediate medical attention.

CAUTION:

Danger of explosion if battery is incorrectly replaced. Replace only with the same or
equivalent type.

There are no restrictions in use in EU.

Este equipamento opera em caráter
secundário, isto é, não tem direito a
proteção contra interferência prejudicial,
mesmo de estações do mesmo tipo, e
não pode causar interferência a
sistemas operando em carater primario”

Este produto está homologado pela
ANATEL, de acordo com os
procedimentos regulamentados pela
Resolução 242/2000, e atende aos
requisitos técnicos aplicados.

Para maiores informações, consulte o
site da ANATEL - www.anatel.gov.br

The Bluetooth®word mark and logos are registered trademarks owned by Bluetooth
SIG, Inc. and any use of such marks by HARMAN International Industries, Incorporated
is under license. Other trademarks and trade names are those of their respective
owners.

The terms HDMI, the HDMI logo, and High-Definition Multimedia Interface are
trademarks or registered trademarks of HDMI Licensing LLC in the United States and
other countries.

Manufactured under license from Dolby Laboratories. Dolby, Dolby Audio and the
double-D symbol are trademarks of Dolby Laboratories.

Торговая марка: JBL
Назначение товара: Активная
акустическая система
Изготовитель: Харман Интернешнл Индастриз И
нкорпорейтед, США, 06901 Коннектикут, г
.Стэмфорд, Атлантик Стрит 400, офис 1500
Страна происхождения: Китай
Импортер в Россию: OOO “ХАРМАН РУС СиАйЭс“,
Россия, 127018, г.Москва, ул. Двинцев, д.12, к 1
Гарантийный период: 1 год
Информация о сервисных центрах:
www.harman.com/ru тел.[phone]
Срок службы: 5 лет
Товар сертифицирован
Дата производства: Дата изготовления устройст
ва определяется по двум буквенным обозначени
ям из второй группы символов серийного номер
а изделия, следующих после разделительного зн
ака «-». Кодировка соответствует порядку букв л
атинского алфавита, начиная с января 2010 года
: 000000-MY0000000, где «M» - месяц производства
(А - январь, B - февраль, C - март и т.д.) и «Y» - год
производства (A - 2010, B - 2011, C - 2012 и т.д.).

TR04058_A

FR Guide de démarrage rapide

Note: For complete information about using all of your JBL Bar 2.1, download the full Owner’s Manual from
www.jbl.com. For more product information, please visit www.jbl.com to download the full Owner's Manual.

Contenu de la boîte

1

Soundbar, Sub-woofer, Remote Control, Power
Adaptor, Power Cables*, HDMI Cable, AUX cable,
Wall-Mount Brackets, Product Information &
Wall-mounted guide
* Power cable numbers varied by regions

Place your soundbar

2

2a. Place the Soundbar on the table
2b. Wall mount the SoundBar

Use tape to stick the wall-mounted paper guide on
the wall, push a pen tip throughtthe center to mark
the wall-mounted bracket location and remove the
paper.
Screw the wall mount brackets on the pen mark;
Fixthescrewatthebackofsoundbar;thenhook
the soundbaron the wall.

Connect your soundbar

3

3a. Connect to your TV

HDMI OUT (ARC), HDMI, HDMI (ARC),
OPTICAL IN, OPTICAL, OPTICAL OUT, TV

3b. Connect to other devices

HDMI, AUX cable, AUX-IN, HDMI IN, HDMI OUT
(ARC), AUX-OUT, HDMI OUT, HDMI IN / HDMI
(ARC), Other devices

Power your system

4

Control your soundbar

5

5a. Top Panel

Power, Volume Down, Volume Up, Source

5b. Remote control

1) Power

2) Source

3) Play / Pause

4) Volume -

5) Volume +

6) Previous

7) Next

8) Audio Sync +

9) Audio Snyc -

10) Mute

6

6a. Press RC Bluetooth button to enter Bluetooth

source

6b.

Choose "JBL Bar 2.1" to connect
Remark: Press and hold RC Bluetooth button for
3secondsto

7

Press RC Soundshift button to enable Soundshift
feature. While Soundshift is on, play and pause
your music source to enjoy auto-switch between
your mobile devices (A) and TV (B).

11) Bass -

12) Bass +

13) Sound mode

14) Soundshift On / off

15) Shuffle / Repeat

16)

Surround On / off

17) Night mode On / off

18) Dim display

19) Bluetooth

Bluetooth connection

JBL SoundShift

®

8

TV Remote response

Use your own TV remote control to control your
soundbar

8a. For most Samsung, LG, Sony and Vizio TVs

PressandholdRCSURROUNDbuttontoenable
TV remote response.

8b. For other TVs

Program the soundbar to response TV remote
control

1) Press Volume -on the soundbarand press
volume-on the TV remote control

2) For Volume –and Mute, follow the same
procedur ans now the soundbar response
to your TV remote.

Product Specications

9

• Total JBL Bar 2.1 Amplifier Power : 440W

• SPL max: 103dB

• Réponse en fr

• Entrées vidéo HDMI: 3

•

• Version Bluetooth: 3.0

• Portée du Bluetooth : 10m (32 pi.)

•

• Taille de haut-parleur de barre de son :

• Dimensions de la barre de son (L x P x H) : 1100 x

•

• Consommation électrique de la barre de son (veille) :

• Consommation électrique de la barre de son (max) :

•

• Taille de haut-parleur de caisson de graves : 200

• Dimensions du caisson de graves (L x P x H) :

• Poids du caisson de graves: 9,5kg (21 livres)

• Consommation électrique du caisson de graves

• Consommation électrique du caisson de graves

• Dimensions de l'emballage(L x P x H) :

•

LamarqueverbaleetleslogotypesBluetooth
sont des marques commerciales déposées et la
propriété de Bluetooth SIG, Inc. et toute utilisation
de ces marques par HARMAN International
Industries, Incorporated, est faite sous licence.
Les autres marques et appellations commerciales
sont celles de leurs propriétaires respectifs.

Les termes HDMI, le logo HDMI et High-Definition
Multimedia Interface sont des marques
commerciales ou des marques commerciales
déposées de HDMI Licensing LLC aux États-Unis
et dans d'autres pays.

Fabriqué sous licence des Laboratoires Dolby.
Dolby, Dolby Audio et le symbole du double-D
sont des marques commerciales des Laboratoires
Dolby.

équence : 40Hz – 20 kHz

Sortie vidéo HDMI (avec canal de retour audio ARC) : 1

Puissance de l'amplificateur de la barre de son: 240 W

58mm (2,25")

76 x 97 mm (44" x 3" x 4")
Poids de la barre de son: 3,4kg (7,5 livres)

<0,5W

60W
Puissance d'amplification du caisson de graves:
200W

mm (8")

320 x 320 x 355,5mm (13" x 13" x 14")

(veille): < 0,5 W

(max): 100W

1210 x 395 x 520 mm (46" x 16" x 19")
Poids de l'emballage (brut): 16 kg (35 livres)

®

ES Guía de inicio rápido

Note: For complete information about using all of your JBL Bar 2.1, download the full Owner’s Manual from
www.jbl.com. For more product information, please visit www.jbl.com to download the full Owner's Manual.

Contenido de la caja

1

Soundbar, Sub-woofer, Remote Control, Power
Adaptor, Power Cables*, HDMI Cable, AUX cable,
Wall-Mount Brackets, Product Information &
Wall-mounted guide
* Power cable numbers varied by regions

Place your soundbar

2

2a. Place the Soundbar on the table
2b. Wall mount the SoundBar

Use tape to stick the wall-mounted paper guide on
the wall, push a pen tip throughtthe center to mark
the wall-mounted bracket location and remove the
paper.
Screw the wall mount brackets on the pen mark;
Fixthescrewatthebackofsoundbar;thenhook
the soundbaron the wall.

Connect your soundbar

3

3a. Connect to your TV

HDMI OUT (ARC), HDMI, HDMI (ARC),
OPTICAL IN, OPTICAL, OPTICAL OUT, TV

3b. Connect to other devices

HDMI, AUX cable, AUX-IN, HDMI IN, HDMI OUT
(ARC), AUX-OUT, HDMI OUT, HDMI IN / HDMI
(ARC), Other devices

Power your system

4

Control your soundbar

5

5a. Top Panel

Power, Volume Down, Volume Up, Source

5b. Remote control

1) Power

2) Source

3) Play / Pause

4) Volume -

5) Volume +

6) Previous

7) Next

8) Audio Sync +

9) Audio Snyc -

10) Mute

6

6a. Press RC Bluetooth button to enter Bluetooth

source

6b.

Choose "JBL Bar 2.1" to connect
Remark: Press and hold RC Bluetooth button for
3secondsto

7

Press RC Soundshift button to enable Soundshift
feature. While Soundshift is on, play and pause
your music source to enjoy auto-switch between
your mobile devices (A) and TV (B).

11) Bass -

12) Bass +

13) Sound mode

14) Soundshift On / off

15) Shuffle / Repeat

16)

Surround On / off

17) Night mode On / off

18) Dim display

19) Bluetooth

Bluetooth connection

JBL SoundShift

®

8

TV Remote response

Use your own TV remote control to control your
soundbar

8a. For most Samsung, LG, Sony and Vizio TVs

PressandholdRCSURROUNDbuttontoenable
TV remote response.

8b. For other TVs

Program the soundbar to response TV remote
control

1) Press Volume -on the soundbarand press
volume-on the TV remote control

2) For Volume –and Mute, follow the same
procedur ans now the soundbar response
to your TV remote.

Product Specications

9

• Total JBL Bar 2.1 Amplifier Power : 440W

• SPL max: 103dB

• Réponse en fr

• Entrées vidéo HDMI: 3

•

• Version Bluetooth : 3.0

• Portée du Bluetooth : 10 m (32 pi.)

•

• Taille de haut-parleur de barre de son :

• Dimensions de la barre de son (L x P x H) : 1100 x

•

• Consommation électrique de la barre de son (veille):

• Consommation électrique de la barre de son (max) :

•

• Taille de haut-parleur de caisson de graves : 200

• Dimensions du caisson de graves (L x P x H) :

• Poids du caisson de graves: 9,5kg (21 livres)

• Consommation électrique du caisson de graves

• Consommation électrique du caisson de graves

• Dimensions de l'emballage(L x P x H) :

•

La marca de la palabra Bluetooth®y los logotipos
son marcas registradas propiedad de Bluetooth
SIG, Inc.y cualquier uso de dichas marcas por
parte de HARMAN International Industries,
Incorporated se realiza bajo licencia. Otras marcas
registradas y comerciales son aquellas de sus
respectivos propietarios.

Los términos HDMI, el logotipo HDMI y
High-Definition Multimedia Interface son marcas
registradas de HDMI Licensing LLC en Estados
Unidos y otros países.

Fabricado con licencia de Dolby Laboratories.
Dolby, Dolby Audio y el símbolo de la doble D son
marcas comerciales de Dolby Laboratories.

équence : 40Hz – 20 kHz

Sortie vidéo HDMI (avec canal de retour audio ARC) : 1

Puissance de l'amplificateur de la barre de son: 240 W

58mm (2,25")

76 x 97 mm (44" x 3" x 4")
Poids de la barre de son: 3,4kg (7,5 livres)

<0,5W

60W
Puissance d'amplification du caisson de graves:
200W

mm (8")

320 x 320 x 355,5mm (13" x 13" x 14")

(veille): < 0,5 W

(max): 100W

1210 x 395 x 520 mm (46" x 16" x 19")
Poids de l'emballage (brut): 16 kg (35 livres)

PT Guia de Início Rápido

Note: For complete information about using all of your JBL Bar 2.1, download the full Owner’s Manual from
www.jbl.com. For more product information, please visit www.jbl.com to download the full Owner's Manual.

Conteúdo da caixa

1

Soundbar, Sub-woofer, Remote Control, Power
Adaptor, Power Cables*, HDMI Cable, AUX cable,
Wall-Mount Brackets, Product Information &
Wall-mounted guide
* Power cable numbers varied by regions

Place your soundbar

2

2a. Place the Soundbar on the table
2b. Wall mount the SoundBar

Use tape to stick the wall-mounted paper guide on
the wall, push a pen tip throughtthe center to mark
the wall-mounted bracket location and remove the
paper.
Screw the wall mount brackets on the pen mark;
Fixthescrewatthebackofsoundbar;thenhook
the soundbaron the wall.

Connect your soundbar

3

3a. Connect to your TV

HDMI OUT (ARC), HDMI, HDMI (ARC),
OPTICAL IN, OPTICAL, OPTICAL OUT, TV

3b. Connect to other devices

HDMI, AUX cable, AUX-IN, HDMI IN, HDMI OUT
(ARC), AUX-OUT, HDMI OUT, HDMI IN / HDMI
(ARC), Other devices

Power your system

4

Control your soundbar

5

5a. Top Panel

Power, Volume Down, Volume Up, Source

5b. Remote control

1) Power

2) Source

3) Play / Pause

4) Volume -

5) Volume +

6) Previous

7) Next

8) Audio Sync +

9) Audio Snyc -

10) Mute

6

6a. Press RC Bluetooth button to enter Bluetooth

source

6b.

Choose "JBL Bar 2.1" to connect
Remark: Press and hold RC Bluetooth button for
3secondsto

7

Press RC Soundshift button to enable Soundshift
feature. While Soundshift is on, play and pause
your music source to enjoy auto-switch between
your mobile devices (A) and TV (B).

11) Bass -

12) Bass +

13) Sound mode

14) Soundshift On / off

15) Shuffle / Repeat

16)

Surround On / off

17) Night mode On / off

18) Dim display

19) Bluetooth

Bluetooth connection

JBL SoundShift

®

8

TV Remote response

Use your own TV remote control to control your
soundbar

8a. For most Samsung, LG, Sony and Vizio TVs

PressandholdRCSURROUNDbuttontoenable
TV remote response.

8b. For other TVs

Program the soundbar to response TV remote
control

1) Press Volume -on the soundbarand press
volume-on the TV remote control

2) For Volume –and Mute, follow the same
procedur ans now the soundbar response
to your TV remote.

Product Specications

9

• Total JBL Bar 2.1 Amplifier Power : 440W

• SPL max: 103dB

• Réponse en fr

• Entrées vidéo HDMI: 3

•

• Version Bluetooth: 3.0

• Portée du Bluetooth : 10 m (32 pi.)

•

• Taille de haut-parleur de barre de son :

• Dimensions de la barre de son (L x P x H) : 1100 x

•

• Consommation électrique de la barre de son (veille) :

• Consommation électrique de la barre de son (max) :

•

• Taille de haut-parleur de caisson de graves : 200

• Dimensions du caisson de graves (L x P x H) :

• Poids du caisson de graves: 9,5kg (21 livres)

• Consommation électrique du caisson de graves

• Consommation électrique du caisson de graves

• Dimensions de l'emballage(L x P x H) :

•

A marca comercial Bluetooth®e os logotipos são
marcas comerciais registradas pertences à
Bluetooth SIG, Inc. Toda e qualquer utilização
destas marcas pela HARMAN International
Industries, Incorporated é feita sob licença. Todas
as outras marcas comerciais e nomes comerciais
pertencem aos respectivos proprietários.

Os termos HDMI, o logotipo HDMI e
High-Definition Multimedia Interface são marcas
comerciais ou marcas comerciais registradas da
HDMI Licensing LLC nos Estados Unidos da
América e em outros países.

Fabricado sob licença da Dolby Laboratories.
Dolby Audio e o símbolo do duplo-D são marcas
registradas da Dolby Laboratories.

équence : 40Hz – 20 kHz

Sortie vidéo HDMI (avec canal de retour audio ARC) : 1

Puissance de l'amplificateur de la barre de son: 240 W

58mm (2,25")

76 x 97 mm (44" x 3" x 4")
Poids de la barre de son: 3,4kg (7,5 livres)

<0,5W

60W
Puissance d'amplification du caisson de graves:
200W

mm (8")

320 x 320 x 355,5mm (13" x 13" x 14")

(veille): < 0,5 W

(max): 100W

1210 x 395 x 520 mm (46" x 16" x 19")
Poids de l'emballage (brut): 16 kg (35 livres)

DE Kurzanleitung

Note: For complete information about using all of your JBL Bar 2.1, download the full Owner’s Manual from
www.jbl.com. For more product information, please visit www.jbl.com to download the full Owner's Manual.

Verpackungsinhalt

1

Soundbar, Sub-woofer, Remote Control, Power
Adaptor, Power Cables*, HDMI Cable, AUX cable,
Wall-Mount Brackets, Product Information &
Wall-mounted guide
* Power cable numbers varied by regions

Place your soundbar

2

2a. Place the Soundbar on the table
2b. Wall mount the SoundBar

Use tape to stick the wall-mounted paper guide on
the wall, push a pen tip throughtthe center to mark
the wall-mounted bracket location and remove the
paper.
Screw the wall mount brackets on the pen mark;
Fixthescrewatthebackofsoundbar;thenhook
the soundbaron the wall.

Connect your soundbar

3

3a. Connect to your TV

HDMI OUT (ARC), HDMI, HDMI (ARC),
OPTICAL IN, OPTICAL, OPTICAL OUT, TV

3b. Connect to other devices

HDMI, AUX cable, AUX-IN, HDMI IN, HDMI OUT
(ARC), AUX-OUT, HDMI OUT, HDMI IN / HDMI
(ARC), Other devices

Power your system

4

Control your soundbar

5

5a. Top Panel

Power, Volume Down, Volume Up, Source

5b. Remote control

1) Power

2) Source

3) Play / Pause

4) Volume -

5) Volume +

6) Previous

7) Next

8) Audio Sync +

9) Audio Snyc -

10) Mute

6

6a. Press RC Bluetooth button to enter Bluetooth

source

6b.

Choose "JBL Bar 2.1" to connect
Remark: Press and hold RC Bluetooth button for
3secondsto

7

Press RC Soundshift button to enable Soundshift
feature. While Soundshift is on, play and pause
your music source to enjoy auto-switch between
your mobile devices (A) and TV (B).

11) Bass -

12) Bass +

13) Sound mode

14) Soundshift On / off

15) Shuffle / Repeat

16)

Surround On / off

17) Night mode On / off

18) Dim display

19) Bluetooth

Bluetooth connection

JBL SoundShift

®

8

TV Remote response

Use your own TV remote control to control your
soundbar

8a. For most Samsung, LG, Sony and Vizio TVs

Press and hold RC SURROUND button to enable
TV remote response.

8b. For other TVs

Program the soundbar to response TV remote
control

1) Press Volume -on the soundbarand press
volume-on the TV remote control

2) For Volume –and Mute, follow the same
procedur ans now the soundbar response
to your TV remote.

Product Specications

9

• Total JBL Bar 2.1 Amplifier Power : 440W

• SPL max: 103dB

• Réponse en fr

• Entrées vidéo HDMI: 3

•

• Version Bluetooth: 3.0

• Portée du Bluetooth : 10 m (32 pi.)

•

• Taille de haut-parleur de barre de son :

• Dimensions de la barre de son (L x P x H) : 1100 x

•

• Consommation électrique de la barre de son (veille) :

• Consommation électrique de la barre de son (max) :

•

• Taille de haut-parleur de caisson de graves : 200

• Dimensions du caisson de graves (L x P x H) :

• Poids du caisson de graves: 9,5kg (21 livres)

• Consommation électrique du caisson de graves

• Consommation électrique du caisson de graves

• Dimensions de l'emballage(L x P x H) :

•

Die Bluetooth®-Wortmarke und die Logos sind
eingetrageneMarkenundimBesitzvonBluetooth
SIG, Inc. und jegliche Verwendung dieser Marken
durch HARMAN International Industries,
Incorporated, erfolgt unter Lizenz. Andere
Markenzeichen und Markennamen sind Eigentum
ihrer jeweiligen Besitzer.

Die Begriffe HDMI, das HDMI-Logo und
High-Definition Multimedia Interface sind Marken
oder eingetragene Marken der HDMI Licensing
LLC in den Vereinigten Staaten und anderen
Ländern.

Hergestellt in Lizenz von Dolby Laboratories.
Dolby, Dolby Audio und das Doppel-D-Symbol
sind Warenzeichen der Dolby Laboratories.

équence : 40Hz – 20 kHz

Sortie vidéo HDMI (avec canal de retour audio ARC) : 1

Puissance de l'amplificateur de la barre de son: 240 W

58mm (2,25")

76 x 97 mm (44" x 3" x 4")
Poids de la barre de son: 3,4kg (7,5 livres)

<0,5W

60W
Puissance d'amplification du caisson de graves:
200W

mm (8")

320 x 320 x 355,5mm (13" x 13" x 14")

(veille): < 0,5 W

(max): 100W

1210 x 395 x 520 mm (46" x 16" x 19")
Poids de l'emballage (brut): 16 kg (35 livres)

IT Guida di avvio rapido

Note: For complete information about using all of your JBL Bar 2.1, download the full Owner’s Manual from
www.jbl.com. For more product information, please visit www.jbl.com to download the full Owner's Manual.

Contenuto della confezione

1

Soundbar, Sub-woofer, Remote Control, Power
Adaptor, Power Cables*, HDMI Cable, AUX cable,
Wall-Mount Brackets, Product Information &
Wall-mounted guide
* Power cable numbers varied by regions

Place your soundbar

2

2a. Place the Soundbar on the table
2b. Wall mount the SoundBar

Use tape to stick the wall-mounted paper guide on
the wall, push a pen tip throughtthe center to mark
the wall-mounted bracket location and remove the
paper.
Screw the wall mount brackets on the pen mark;
Fixthescrewatthebackofsoundbar;thenhook
the soundbaron the wall.

Connect your soundbar

3

3a. Connect to your TV

HDMI OUT (ARC), HDMI, HDMI (ARC),
OPTICAL IN, OPTICAL, OPTICAL OUT, TV

3b. Connect to other devices

HDMI, AUX cable, AUX-IN, HDMI IN, HDMI OUT
(ARC), AUX-OUT, HDMI OUT, HDMI IN / HDMI
(ARC), Other devices

Power your system

4

Control your soundbar

5

5a. Top Panel

Power, Volume Down, Volume Up, Source

5b. Remote control

1) Power

2) Source

3) Play / Pause

4) Volume -

5) Volume +

6) Previous

7) Next

8) Audio Sync +

9) Audio Snyc -

10) Mute

6

6a. Press RC Bluetooth button to enter Bluetooth

source

6b.

Choose "JBL Bar 2.1" to connect
Remark: Press and hold RC Bluetooth button for
3secondsto

7

Press RC Soundshift button to enable Soundshift
feature. While Soundshift is on, play and pause
your music source to enjoy auto-switch between
your mobile devices (A) and TV (B).

11) Bass -

12) Bass +

13) Sound mode

14) Soundshift On / off

15) Shuffle / Repeat

16)

Surround On / off

17) Night mode On / off

18) Dim display

19) Bluetooth

Bluetooth connection

JBL SoundShift

®

8

TV Remote response

Use your own TV remote control to control your
soundbar

8a. For most Samsung, LG, Sony and Vizio TVs

PressandholdRCSURROUNDbuttontoenable
TV remote response.

8b. For other TVs

Program the soundbar to response TV remote
control

1) Press Volume -on the soundbarand press
volume-on the TV remote control

2) For Volume –and Mute, follow the same
procedur ans now the soundbar response
to your TV remote.

Product Specications

9

• Total JBL Bar 2.1 Amplifier Power : 440 W

• SPL max: 103dB

• Réponse en fr

• Entrées vidéo HDMI: 3

•

• Version Bluetooth : 3.0

• Portée du Bluetooth : 10 m (32 pi.)

•

• Taille de haut-parleur de barre de son :

• Dimensions de la barre de son (L x P x H) : 1100 x

•

• Consommation électrique de la barre de son (veille):

• Consommation électrique de la barre de son (max) :

•

• Taille de haut-parleur de caisson de graves : 200

• Dimensions du caisson de graves (L x P x H) :

• Poids du caisson de graves: 9,5kg (21 livres)

• Consommation électrique du caisson de graves

• Consommation électrique du caisson de graves

• Dimensions de l'emballage(L x P x H) :

•

Il marchio e i loghi Bluetooth®sono marchi
registrati e sono di proprietà della Bluetooth SIG,
Inc., e qualsivoglia uso di tali marchi da parte di
HARMAN International Industries, Incorporated
avviene in base a licenza. Altri marchi di fabbrica e
marchi commerciali sono di proprietà dei rispettivi
proprietari.

I termini HDMI, il logo HDMI e High-Definition
Multimedia Interface sono marchi di fabbrica o
marchi di fabbrica registrati di HDMI Licensing
LLC negli Stati Uniti e in altri Paesi.

Prodotto su licenza di Dolby Laboratories. Dolby,
Dolby Audio e il simbolo della doppia D sono
marchi registrati di Dolby Laboratories.

équence : 40Hz – 20 kHz

Sortie vidéo HDMI (avec canal de retour audio ARC) : 1

Puissance de l'amplificateur de la barre de son: 240 W

58mm (2,25")

76 x 97 mm (44" x 3" x 4")
Poids de la barre de son: 3,4kg (7,5 livres)

<0,5W

60W
Puissance d'amplification du caisson de graves:
200W

mm (8")

320 x 320 x 355,5mm (13" x 13" x 14")

(veille): < 0,5 W

(max): 100W

1210 x 395 x 520 mm (46" x 16" x 19")
Poids de l'emballage (brut): 16 kg (35 livres)

NL Snelstartgids

Note: For complete information about using all of your JBL Bar 2.1, download the full Owner’s Manual from
www.jbl.com. For more product information, please visit www.jbl.com to download the full Owner's Manual.

Verpakkingsinhoud

1

Soundbar, Sub-woofer, Remote Control, Power
Adaptor, Power Cables*, HDMI Cable, AUX cable,
Wall-Mount Brackets, Product Information &
Wall-mounted guide
* Power cable numbers varied by regions

Place your soundbar

2

2a. Place the Soundbar on the table
2b. Wall mount the SoundBar

Use tape to stick the wall-mounted paper guide on
the wall, push a pen tip throughtthe center to mark
the wall-mounted bracket location and remove the
paper.
Screw the wall mount brackets on the pen mark;
Fixthescrewatthebackofsoundbar;thenhook
the soundbaron the wall.

Connect your soundbar

3

3a. Connect to your TV

HDMI OUT (ARC), HDMI, HDMI (ARC),
OPTICAL IN, OPTICAL, OPTICAL OUT, TV

3b. Connect to other devices

HDMI, AUX cable, AUX-IN, HDMI IN, HDMI OUT
(ARC), AUX-OUT, HDMI OUT, HDMI IN / HDMI
(ARC), Other devices

Power your system

4

Control your soundbar

5

5a. Top Panel

Power, Volume Down, Volume Up, Source

5b. Remote control

1) Power

2) Source

3) Play / Pause

4) Volume -

5) Volume +

6) Previous

7) Next

8) Audio Sync +

9) Audio Snyc -

10) Mute

6

6a. Press RC Bluetooth button to enter Bluetooth

source

6b.

Choose "JBL Bar 2.1" to connect
Remark: Press and hold RC Bluetooth button for
3secondsto

7

Press RC Soundshift button to enable Soundshift
feature. While Soundshift is on, play and pause
your music source to enjoy auto-switch between
your mobile devices (A) and TV (B).

11) Bass -

12) Bass +

13) Sound mode

14) Soundshift On / off

15) Shuffle / Repeat

16) Surround On / off

17) Night mode On / off

18) Dim display

19) Bluetooth

Bluetooth connection

JBL SoundShift

®

8

TV Remote response

Use your own TV remote control to control your
soundbar

8a. For most Samsung, LG, Sony and Vizio TVs

PressandholdRCSURROUNDbuttontoenable
TV remote response.

8b. For other TVs

Program the soundbar to response TV remote
control

1) Press Volume -on the soundbarand press
volume-on the TV remote control

2) For Volume –and Mute, follow the same
procedur ans now the soundbar response
to your TV remote.

Product Specications

9

• Total JBL Bar 2.1 Amplifier Power : 440W

• SPL max: 103dB

• Réponse en fréquence : 40Hz – 20 kHz

• Entrées vidéo HDMI: 3

•

Sortie vidéo HDMI (avec canal de retour audio ARC) : 1

• Version Bluetooth : 3.0

• Portée du Bluetooth : 10 m (32 pi.)

•

Puissance de l'amplificateur de la barre de son : 240W

• Taille de haut-parleur de barre de son :

58mm (2,25")

• Dimensions de la barre de son (L x P x H) : 1100 x

76 x 97 mm (44" x 3" x 4")

• Poids de la barre de son: 3,4kg (7,5 livres)

• Consommation électrique de la barre de son (veille) :

<0,5W

• Consommation électrique de la barre de son (max) :

60W

• Puissance d'amplification du caisson de graves:

200W

• Taille de haut-parleur de caisson de graves : 200

mm (8")

• Dimensions du caisson de graves (L x P x H) :

320x320x355,5mm(13"x13"x14")

• Poids du caisson de graves: 9,5kg (21 livres)

• Consommation électrique du caisson de graves

(veille): < 0,5 W

• Consommation électrique du caisson de graves

(max): 100W
Dimensions de l'emballage(L x P x H) :

•

1210 x 395 x 520 mm (46" x 16" x 19")

• Poids de l'emballage (brut): 16 kg (35 livres)

Het Bluetooth®-woordmerk en logo zijn
gedeponeerde handelsmerken en zijn eigendom
van Bluetooth SIG, Inc en ieder gebruik van deze
merken door HARMAN International Industries,
Incorporated is onder licentie. Andere
handelsmerken en merknamen zijn die van hun
respectievelijke eigenaren.

De termen HDMI, het HDMI-logo en
High-Definition Multimedia Interface zijn
handelsmerken of gedeponeerde handelsmerken
van HDMI Licensing LLC in de Verenigde Staten
en andere landen.

Vervaardigd onder licentie van Dolby Laboratories.
Dolby, Dolby Audio en het dubbel-D-symbool zijn
handelsmerken van Dolby Laboratories.

NO Hurtigstartveiledning

Note: For complete information about using all of your JBL Bar 2.1, download the full Owner’s Manual from
www.jbl.com. For more product information, please visit www.jbl.com to download the full Owner's Manual.

Innhold i esken

1

Soundbar, Sub-woofer, Remote Control, Power
Adaptor, Power Cables*, HDMI Cable, AUX cable,
Wall-Mount Brackets, Product Information &
Wall-mounted guide
* Power cable numbers varied by regions

Place your soundbar

2

2a. Place the Soundbar on the table
2b. Wall mount the SoundBar

Use tape to stick the wall-mounted paper guide on
the wall, push a pen tip throughtthe center to mark
the wall-mounted bracket location and remove the
paper.
Screw the wall mount brackets on the pen mark;
Fixthescrewatthebackofsoundbar;thenhook
the soundbaron the wall.

Connect your soundbar

3

3a. Connect to your TV

HDMI OUT (ARC), HDMI, HDMI (ARC),
OPTICAL IN, OPTICAL, OPTICAL OUT, TV

3b. Connect to other devices

HDMI, AUX cable, AUX-IN, HDMI IN, HDMI OUT
(ARC), AUX-OUT, HDMI OUT, HDMI IN / HDMI
(ARC), Other devices

Power your system

4

Control your soundbar

5

5a. Top Panel

Power, Volume Down, Volume Up, Source

5b. Remote control

1) Power

2) Source

3) Play / Pause

4) Volume -

5) Volume +

6) Previous

7) Next

8) Audio Sync +

9) Audio Snyc -

10) Mute

6

6a. Press RC Bluetooth button to enter Bluetooth

source

6b.

Choose "JBL Bar 2.1" to connect
Remark: Press and hold RC Bluetooth button for
3secondsto

7

Press RC Soundshift button to enable Soundshift
feature. While Soundshift is on, play and pause
your music source to enjoy auto-switch between
your mobile devices (A) and TV (B).

11) Bass -

12) Bass +

13) Sound mode

14) Soundshift On / off

15) Shuffle / Repeat

16) Surround On / off

17) Night mode On / off

18) Dim display

19) Bluetooth

Bluetooth connection

JBL SoundShift

®

8

TV Remote response

Use your own TV remote control to control your
soundbar

8a. For most Samsung, LG, Sony and Vizio TVs

PressandholdRCSURROUNDbuttontoenable
TV remote response.

8b. For other TVs

Program the soundbar to response TV remote
control

1) Press Volume -on the soundbarand press
volume-on the TV remote control

2) For Volume –and Mute, follow the same
procedur ans now the soundbar response
to your TV remote.

Product Specications

9

• Total JBL Bar 2.1 Amplifier Power : 440W

• SPL max: 103dB

• Réponse en fréquence : 40Hz – 20 kHz

• Entrées vidéo HDMI: 3

•

Sortie vidéo HDMI (avec canal de retour audio ARC) : 1

• Version Bluetooth : 3.0

• Portée du Bluetooth : 10 m (32 pi.)

•

Puissance de l'amplificateur de la barre de son : 240W

• Taille de haut-parleur de barre de son :

58mm (2,25")

• Dimensions de la barre de son (L x P x H) : 1100 x

76 x 97 mm (44" x 3" x 4")

• Poids de la barre de son: 3,4kg (7,5 livres)

• Consommation électrique de la barre de son (veille) :

<0,5W

• Consommation électrique de la barre de son (max) :

60W

• Puissance d'amplification du caisson de graves:

200W

• Taille de haut-parleur de caisson de graves : 200

mm (8")

• Dimensions du caisson de graves (L x P x H) :

320x320x355,5mm(13"x13"x14")

• Poids du caisson de graves: 9,5kg (21 livres)

• Consommation électrique du caisson de graves

(veille): < 0,5 W

• Consommation électrique du caisson de graves

(max): 100W
Dimensions de l'emballage(L x P x H) :

•

1210 x 395 x 520 mm (46" x 16" x 19")

• Poids de l'emballage (brut): 16 kg (35 livres)

Bluetooth®navn og logo er registrerte varemerker
som eies av Bluetooth SIG, Inc. og all bruk av slike
merker av HARMAN International Industries,
Incorporated er lisensiert. Andre varemerker og
varenavn tilhører de respektive eiere

Begrepene HDMI, HDMI-logoen og High-Definition
Multimedia Interface er varemerker eller registrerte
varemerker for HDMI Licensing LLC i USA og
andre land.

Produsert under lisens fra Dolby Laboratories.
Dolby, Dolby Audio og dobbel-D-symbolet er
varemerker for Dolby Laboratories.

FI Pikaopas

Note: For complete information about using all of your JBL Bar 2.1, download the full Owner’s Manual from
www.jbl.com. For more product information, please visit www.jbl.com to download the full Owner's Manual.

Pakkauksen sisältö

1

Soundbar, Sub-woofer, Remote Control, Power
Adaptor, Power Cables*, HDMI Cable, AUX cable,
Wall-Mount Brackets, Product Information &
Wall-mounted guide
* Power cable numbers varied by regions

Place your soundbar

2

2a. Place the Soundbar on the table
2b. Wall mount the SoundBar

Use tape to stick the wall-mounted paper guide on
the wall, push a pen tip throughtthe center to mark
the wall-mounted bracket location and remove the
paper.
Screw the wall mount brackets on the pen mark;
Fixthescrewatthebackofsoundbar;thenhook
the soundbaron the wall.

Connect your soundbar

3

3a. Connect to your TV

HDMI OUT (ARC), HDMI, HDMI (ARC),
OPTICAL IN, OPTICAL, OPTICAL OUT, TV

3b. Connect to other devices

HDMI, AUX cable, AUX-IN, HDMI IN, HDMI OUT
(ARC), AUX-OUT, HDMI OUT, HDMI IN / HDMI
(ARC), Other devices

Power your system

4

Control your soundbar

5

5a. Top Panel

Power, Volume Down, Volume Up, Source

5b. Remote control

1) Power

2) Source

3) Play / Pause

4) Volume -

5) Volume +

6) Previous

7) Next

8) Audio Sync +

9) Audio Snyc -

10) Mute

6

6a. Press RC Bluetooth button to enter Bluetooth

source

6b.

Choose "JBL Bar 2.1" to connect
Remark: Press and hold RC Bluetooth button for
3secondsto

7

Press RC Soundshift button to enable Soundshift
feature. While Soundshift is on, play and pause
your music source to enjoy auto-switch between
your mobile devices (A) and TV (B).

11) Bass -

12) Bass +

13) Sound mode

14) Soundshift On / off

15) Shuffle / Repeat

16) Surround On / off

17) Night mode On / off

18) Dim display

19) Bluetooth

Bluetooth connection

JBL SoundShift

®

8

TV Remote response

Use your own TV remote control to control your
soundbar

8a. For most Samsung, LG, Sony and Vizio TVs

PressandholdRCSURROUNDbuttontoenable
TV remote response.

8b. For other TVs

Program the soundbar to response TV remote
control

1) Press Volume -on the soundbarand press
volume-on the TV remote control

2) For Volume –and Mute, follow the same
procedur ans now the soundbar response
to your TV remote.

Product Specications

9

• Total JBL Bar 2.1 Amplifier Power : 440W

• SPL max: 103dB

• Réponse en fréquence : 40Hz – 20 kHz

• Entrées vidéo HDMI: 3

•

Sortie vidéo HDMI (avec canal de retour audio ARC) : 1

• Version Bluetooth : 3.0

• Portée du Bluetooth : 10 m (32 pi.)

•

Puissance de l'amplificateur de la barre de son : 240W

• Taille de haut-parleur de barre de son :

58mm (2,25")

• Dimensions de la barre de son (L x P x H) : 1100 x

76 x 97 mm (44" x 3" x 4")

• Poids de la barre de son: 3,4kg (7,5 livres)

• Consommation électrique de la barre de son (veille) :

<0,5W

• Consommation électrique de la barre de son (max) :

60W

• Puissance d'amplification du caisson de graves:

200W

• Taille de haut-parleur de caisson de graves : 200

mm (8")

• Dimensions du caisson de graves (L x P x H) :

320 x 320 x 355,5mm (13" x 13" x 14")

• Poids du caisson de graves: 9,5kg (21 livres)

• Consommation électrique du caisson de graves

(veille): < 0,5 W

• Consommation électrique du caisson de graves

(max): 100W
Dimensions de l'emballage(L x P x H) :

•

1210 x 395 x 520 mm (46" x 16" x 19")

• Poids de l'emballage (brut): 16 kg (35 livres)

Kirjoitettu Bluetooth-merkki ja sen logo ovat
rekisteröityjä tavaramerkkejä ja niiden omistaja on
Bluetooth SIG, Inc., ja HARMAN International
Industries, Incorporated käyttää niitä lisenssin
alaisena. Muut tavaramerkit ja kauppanimet ovat
omistajiensa omaisuutta

Käsitteet HDMI, HDMI-logo, ja High-Definition
Multimedia Interface ovat HDMI Licensing LLC:n
Yhdysvalloissa ja muissa maissa rekisteröityjä
tavaramerkkejä tai tavaramerkkejä.

Valmistettu Dolby Laboratories -yrityksen lisenssin
alaisena. Dolby, Dolby Audio ja kaksois-D

-symboli ovat Dolby Laboratories-yrityksen

tavaramerkkejä.

RU Краткое руководство

Note: For complete information about using all of your JBL Bar 2.1, download the full Owner’s Manual from
www.jbl.com. For more product information, please visit www.jbl.com to download the full Owner's Manual.

Комплект поставки

1

Soundbar, Sub-woofer, Remote Control, Power
Adaptor, Power Cables*, HDMI Cable, AUX cable,
Wall-Mount Brackets, Product Information &
Wall-mounted guide
* Power cable numbers varied by regions

Place your soundbar

2

2a. Place the Soundbar on the table
2b. Wall mount the SoundBar

Use tape to stick the wall-mounted paper guide on
the wall, push a pen tip throughtthe center to mark
the wall-mounted bracket location and remove the
paper.
Screw the wall mount brackets on the pen mark;
Fixthescrewatthebackofsoundbar;thenhook
the soundbaron the wall.

Connect your soundbar

3

3a. Connect to your TV

HDMI OUT (ARC), HDMI, HDMI (ARC),
OPTICAL IN, OPTICAL, OPTICAL OUT, TV

3b. Connect to other devices

HDMI, AUX cable, AUX-IN, HDMI IN, HDMI OUT
(ARC), AUX-OUT, HDMI OUT, HDMI IN / HDMI
(ARC), Other devices

Power your system

4

Control your soundbar

5

5a. Top Panel

Power, Volume Down, Volume Up, Source

5b. Remote control

1) Power

2) Source

3) Play / Pause

4) Volume -

5) Volume +

6) Previous

7) Next

8) Audio Sync +

9) Audio Snyc -

10) Mute

6

6a. Press RC Bluetooth button to enter Bluetooth

source

6b.

Choose "JBL Bar 2.1" to connect
Remark: Press and hold RC Bluetooth button for
3 seconds to

7

Press RC Soundshift button to enable Soundshift
feature. While Soundshift is on, play and pause
your music source to enjoy auto-switch between
your mobile devices (A) and TV (B).

11) Bass -

12) Bass +

13) Sound mode

14) Soundshift On / off

15) Shuffle / Repeat

16) Surround On / off

17) Night mode On / off

18) Dim display

19) Bluetooth

Bluetooth connection

JBL SoundShift

®

8

TV Remote response

Use your own TV remote control to control your
soundbar

8a. For most Samsung, LG, Sony and Vizio TVs

PressandholdRCSURROUNDbuttontoenable
TV remote response.

8b. For other TVs

Program the soundbar to response TV remote
control

1) Press Volume -on the soundbarand press
volume-on the TV remote control

2) For Volume –and Mute, follow the same
procedur ans now the soundbar response
to your TV remote.

Product Specications

9

• Total JBL Bar 2.1 Amplifier Power : 440W

• SPL max: 103dB

• Réponse en fréquence : 40Hz – 20 kHz

• Entrées vidéo HDMI: 3

•

Sortie vidéo HDMI (avec canal de retour audio ARC) : 1

• Version Bluetooth : 3.0

• Portée du Bluetooth : 10 m (32 pi.)

•

Puissance de l'amplificateur de la barre de son : 240 W

• Taille de haut-parleur de barre de son :

58mm (2,25")

• Dimensions de la barre de son (L x P x H) : 1100 x

76 x 97 mm (44" x 3" x 4")

• Poids de la barre de son: 3,4kg (7,5 livres)

• Consommation électrique de la barre de son (veille) :

<0,5W

• Consommation électrique de la barre de son (max) :

60W

• Puissance d'amplification du caisson de graves:

200W

• Taille de haut-parleur de caisson de graves : 200

mm (8")

• Dimensions du caisson de graves (L x P x H) :

320 x 320 x 355,5mm (13" x 13" x 14")

• Poids du caisson de graves: 9,5kg (21 livres)

• Consommation électrique du caisson de graves

(veille): < 0,5 W

• Consommation électrique du caisson de graves

(max): 100W
Dimensions de l'emballage(L x P x H) :

•

1210 x 395 x 520 mm (46" x 16" x 19")

• Poids de l'emballage (brut): 16 kg (35 livres)

Словесный товарный знак и логотип Bluetooth®
являются зарегистрированными товарными знаками,
принадлежащими корпорации Bluetooth SIG, Inc., и
всякое их использование компанией HARMAN
International Industries, Incorporated осуществляется в
рамках лицензионного соглашения. Другие товарные
марки и торговые названия принадлежат своим
владельцам.

HDMI, логотип HDMI и High-Denition Multimedia
Interface являются товарными знаками или
зарегистрированными товарными знаками HDMI
Licensing LLC в США и других странах.

Произведено по лицензииDolby Laboratories. Dolby,
Dolby Audio и символ двойного D являются товарными
знаками Dolby Laboratories.

SV Snabbstartsguide

Note: For complete information about using all of your JBL Bar 2.1, download the full Owner’s Manual from
www.jbl.com. For more product information, please visit www.jbl.com to download the full Owner's Manual.

Detta nns i lådan

1

Soundbar, Sub-woofer, Remote Control, Power
Adaptor, Power Cables*, HDMI Cable, AUX cable,
Wall-Mount Brackets, Product Information &
Wall-mounted guide
* Power cable numbers varied by regions

Place your soundbar

2

2a. Place the Soundbar on the table
2b. Wall mount the SoundBar

Use tape to stick the wall-mounted paper guide on
the wall, push a pen tip throughtthe center to mark
the wall-mounted bracket location and remove the
paper.
Screw the wall mount brackets on the pen mark;
Fixthescrewatthebackofsoundbar;thenhook
the soundbaron the wall.

Connect your soundbar

3

3a. Connect to your TV

HDMI OUT (ARC), HDMI, HDMI (ARC),
OPTICAL IN, OPTICAL, OPTICAL OUT, TV

3b. Connect to other devices

HDMI, AUX cable, AUX-IN, HDMI IN, HDMI OUT
(ARC), AUX-OUT, HDMI OUT, HDMI IN / HDMI
(ARC), Other devices

Power your system

4

Control your soundbar

5

5a. Top Panel

Power, Volume Down, Volume Up, Source

5b. Remote control

1) Power

2) Source

3) Play / Pause

4) Volume -

5) Volume +

6) Previous

7) Next

8) Audio Sync +

9) Audio Snyc -

10) Mute

6

6a. Press RC Bluetooth button to enter Bluetooth

source

6b.

Choose "JBL Bar 2.1" to connect
Remark: Press and hold RC Bluetooth button for
3secondsto

7

Press RC Soundshift button to enable Soundshift
feature. While Soundshift is on, play and pause
your music source to enjoy auto-switch between
your mobile devices (A) and TV (B).

11) Bass -

12) Bass +

13) Sound mode

14) Soundshift On / off

15) Shuffle / Repeat

16) Surround On / off

17) Night mode On / off

18) Dim display

19) Bluetooth

Bluetooth connection

JBL SoundShift

®

8

TV Remote response

Use your own TV remote control to control your
soundbar

8a. For most Samsung, LG, Sony and Vizio TVs

PressandholdRCSURROUNDbuttontoenable
TV remote response.

8b. For other TVs

Program the soundbar to response TV remote
control

1) Press Volume -on the soundbarand press
volume-on the TV remote control

2) For Volume –and Mute, follow the same
procedur ans now the soundbar response
to your TV remote.

Product Specications

9

• Total JBL Bar 2.1 Amplifier Power : 440W

• SPL max: 103dB

• Réponse en fréquence : 40Hz – 20 kHz

• Entrées vidéo HDMI: 3

•

Sortie vidéo HDMI (avec canal de retour audio ARC) : 1

• Version Bluetooth : 3.0

• Portée du Bluetooth : 10 m (32 pi.)

•

Puissance de l'amplificateur de la barre de son: 240 W

• Taille de haut-parleur de barre de son:

58mm (2,25")

• Dimensions de la barre de son (L x P x H) : 1100 x

76 x 97 mm (44" x 3" x 4")

• Poids de la barre de son: 3,4kg (7,5 livres)

• Consommation électrique de la barre de son (veille) :

<0,5W

• Consommation électrique de la barre de son (max) :

60W

• Puissance d'amplification du caisson de graves:

200W

• Taille de haut-parleur de caisson de graves : 200

mm (8")

• Dimensions du caisson de graves (L x P x H) :

320 x 320 x 355,5mm (13" x 13" x 14")

• Poids du caisson de graves: 9,5kg (21 livres)

• Consommation électrique du caisson de graves

(veille): < 0,5 W

• Consommation électrique du caisson de graves

(max): 100W
Dimensions de l'emballage(L x P x H) :

•

1210 x 395 x 520 mm (46" x 16" x 19")

• Poids de l'emballage (brut): 16 kg (35 livres)

Ordvarumärket och logotypen Bluetooth® är
registrerade varumärken som tillhör Bluetooth SIG,
Inc., och all användning av dessa av HARMAN
International Industries, Incorporated sker under
licens. Andra varumärken och varunamn tillhör
sina respektive ägare

Termen HDMI, HDMI-logotypen och
High-Definition Multimedia Interface är
registrerade varumärken som tillhör HDMI
Licensing LLC i USA och andra länder.

Tillverkad på licens från Dolby Laboratories. Dolby,
Dolby Audio och dubbel D-symbolen är
varumärken som tillhör Dolby Laboratories.

DA Hurtigstartsguide

Note: For complete information about using all of your JBL Bar 2.1, download the full Owner’s Manual from
www.jbl.com. For more product information, please visit www.jbl.com to download the full Owner's Manual.

Hvad er der i æsken

1

Soundbar, Sub-woofer, Remote Control, Power
Adaptor, Power Cables*, HDMI Cable, AUX cable,
Wall-Mount Brackets, Product Information &
Wall-mounted guide
* Power cable numbers varied by regions

Place your soundbar

2

2a. Place the Soundbar on the table
2b. Wall mount the SoundBar

Use tape to stick the wall-mounted paper guide on
the wall, push a pen tip throughtthe center to mark
the wall-mounted bracket location and remove the
paper.
Screw the wall mount brackets on the pen mark;
Fixthescrewatthebackofsoundbar;thenhook
the soundbaron the wall.

Connect your soundbar

3

3a. Connect to your TV

HDMI OUT (ARC), HDMI, HDMI (ARC),
OPTICAL IN, OPTICAL, OPTICAL OUT, TV

3b. Connect to other devices

HDMI, AUX cable, AUX-IN, HDMI IN, HDMI OUT
(ARC), AUX-OUT, HDMI OUT, HDMI IN / HDMI
(ARC), Other devices

Power your system

4

Control your soundbar

5

5a. Top Panel

Power, Volume Down, Volume Up, Source

5b. Remote control

1) Power

2) Source

3) Play / Pause

4) Volume -

5) Volume +

6) Previous

7) Next

8) Audio Sync +

9) Audio Snyc -

10) Mute

6

6a. Press RC Bluetooth button to enter Bluetooth

source

6b.

Choose "JBL Bar 2.1" to connect
Remark: Press and hold RC Bluetooth button for
3secondsto

7

Press RC Soundshift button to enable Soundshift
feature. While Soundshift is on, play and pause
your music source to enjoy auto-switch between
your mobile devices (A) and TV (B).

11) Bass -

12) Bass +

13) Sound mode

14) Soundshift On / off

15) Shuffle / Repeat

16) Surround On / off

17) Night mode On / off

18) Dim display

19) Bluetooth

Bluetooth connection

JBL SoundShift

®

8

TV Remote response

Use your own TV remote control to control your
soundbar

8a. For most Samsung, LG, Sony and Vizio TVs

PressandholdRCSURROUNDbuttontoenable
TV remote response.

8b. For other TVs

Program the soundbar to response TV remote
control

1) Press Volume -on the soundbarand press
volume-on the TV remote control

2) For Volume –and Mute, follow the same
procedur ans now the soundbar response
to your TV remote.

Product Specications

9

• Total JBL Bar 2.1 Amplifier Power : 440W

• SPL max: 103dB

• Réponse en fréquence : 40Hz – 20 kHz

• Entrées vidéo HDMI: 3

•

Sortie vidéo HDMI (avec canal de retour audio ARC) : 1

• Version Bluetooth : 3.0

• Portée du Bluetooth : 10 m (32 pi.)

•

Puissance de l'amplificateur de la barre de son : 240 W

• Taille de haut-parleur de barre de son :

58mm (2,25")

• Dimensions de la barre de son (L x P x H) : 1100 x

76 x 97 mm (44" x 3" x 4")

• Poids de la barre de son: 3,4kg (7,5 livres)

• Consommation électrique de la barre de son (veille) :

<0,5W

• Consommation électrique de la barre de son (max) :

60W

• Puissance d'amplification du caisson de graves:

200W

• Taille de haut-parleur de caisson de graves : 200

mm (8")

• Dimensions du caisson de graves (L x P x H) :

320 x 320 x 355,5mm (13" x 13" x 14")

• Poids du caisson de graves: 9,5kg (21 livres)

• Consommation électrique du caisson de graves

(veille): < 0,5 W

• Consommation électrique du caisson de graves

(max): 100W
Dimensions de l'emballage(L x P x H) :

•

1210 x 395 x 520 mm (46" x 16" x 19")

• Poids de l'emballage (brut): 16 kg (35 livres)

Varemærket Bluetooth®og de tilhørende logoer er
registrerede varemærker tilhørende Bluetooth SIG,
Inc., og enhver brug af sådanne mærker af
HARMAN International Industries, Incorporated,
foregår under licens. Andre varemærker og
varebetegnelser tilhører deres respektive ejere

Ordene HDMI, HDMI-logoet og High-Definition
Multimedia Interface er varemærker eller
registrerede varemærker tilhørende HDMI
Licensing LLC i USA og andre lande.

Fremstillet under licens fra Dolby Laboratories.
Dolby, Dolby Audio og dobbelt-D symbolet er
varemærker tilhørende Dolby Laboratories.

JP クイックスタートガイド

Note: For complete information about using all of your JBL Bar 2.1, download the full Owner’s Manual from
www.jbl.com. For more product information, please visit www.jbl.com to download the full Owner's Manual.

同梱品

1

Soundbar, Sub-woofer, Remote Control, Power
Adaptor, Power Cables*, HDMI Cable, AUX cable,
Wall-Mount Brackets, Product Information &
Wall-mounted guide
* Power cable numbers varied by regions

Place your soundbar

2

2a. Place the Soundbar on the table
2b. Wall mount the SoundBar

Use tape to stick the wall-mounted paper guide on
the wall, push a pen tip throughtthe center to mark
the wall-mounted bracket location and remove the
paper.
Screw the wall mount brackets on the pen mark;
Fixthescrewatthebackofsoundbar;thenhook
the soundbaron the wall.

Connect your soundbar

3

3a. Connect to your TV

HDMI OUT (ARC), HDMI, HDMI (ARC),
OPTICAL IN, OPTICAL, OPTICAL OUT, TV

3b. Connect to other devices

HDMI, AUX cable, AUX-IN, HDMI IN, HDMI OUT
(ARC), AUX-OUT, HDMI OUT, HDMI IN / HDMI
(ARC), Other devices

Power your system

4

Control your soundbar

5

5a. Top Panel

Power, Volume Down, Volume Up, Source

5b. Remote control

1) Power

2) Source

3) Play / Pause

4) Volume -

5) Volume +

6) Previous

7) Next

8) Audio Sync +

9) Audio Snyc -

10) Mute

6

6a. Press RC Bluetooth button to enter Bluetooth

source

6b.

Choose "JBL Bar 2.1" to connect
Remark: Press and hold RC Bluetooth button for
3 seconds to

7

Press RC Soundshift button to enable Soundshift
feature. While Soundshift is on, play and pause
your music source to enjoy auto-switch between
your mobile devices (A) and TV (B).

11) Bass -

12) Bass +

13) Sound mode

14) Soundshift On / off

15) Shuffle / Repeat

16) Surround On / off

17) Night mode On / off

18) Dim display

19) Bluetooth

Bluetooth connection

JBL SoundShift

®

8

TV Remote response

Use your own TV remote control to control your
soundbar

8a. For most Samsung, LG, Sony and Vizio TVs

PressandholdRCSURROUNDbuttontoenable
TV remote response.

8b. For other TVs

Program the soundbar to response TV remote
control

1) Press Volume -on the soundbarand press
volume-on the TV remote control

2) For Volume –and Mute, follow the same
procedur ans now the soundbar response
to your TV remote.

Product Specications

9

• Total JBL Bar 2.1 Amplifier Power : 440W

• SPL max: 103dB

• Réponse en fréquence : 40Hz – 20 kHz

• Entrées vidéo HDMI: 3

•

Sortie vidéo HDMI (avec canal de retour audio ARC) : 1

• Version Bluetooth: 3.0

• Portée du Bluetooth : 10 m (32 pi.)

•

Puissance de l'amplificateur de la barre de son: 240 W

• Taille de haut-parleur de barre de son :

58mm (2,25")

• Dimensions de la barre de son (L x P x H) : 1100 x

76 x 97 mm (44" x 3" x 4")

• Poids de la barre de son: 3,4kg (7,5 livres)

• Consommation électrique de la barre de son (veille) :

<0,5W

• Consommation électrique de la barre de son (max) :

60W

• Puissance d'amplification du caisson de graves:

200W

• Taille de haut-parleur de caisson de graves : 200

mm (8")

• Dimensions du caisson de graves (L x P x H) :

320 x 320 x 355,5mm (13" x 13" x 14")

• Poids du caisson de graves: 9,5kg (21 livres)

• Consommation électrique du caisson de graves

(veille): < 0,5 W

• Consommation électrique du caisson de graves

(max): 100W
Dimensions de l'emballage(L x P x H) :

•

1210 x 395 x 520 mm (46" x 16" x 19")

• Poids de l'emballage (brut): 16 kg (35 livres)

Bluetooth®のワードマークとロゴは Bluetooth
SIG, Inc.の所有する登録商標であ り、ハーマン･

インターナショナル･インダス トリーズ 株式会
社(HARMAN International Industries, Incorporated)
によるこの商標の いかなる使用もその許可を得
ています。他の 商標および商標名は各所有者に
属します。

HDMI、HDMIロゴ、High-Definition Multimedia
Interfaceは米国およびその他の 国 でのHDMI
Licensing LLCの商標または登 録商標です。

「ドルビーラボラトリーズのライセンスの 下で
製造されます。Dolby、Dolby Audioそ してダブ
ルD 記号はドルビーラボラトリー ズの登録商標
です。」

PL Przewodnik szybkiego startu

Note: For complete information about using all of your JBL Bar 2.1, download the full Owner’s Manual from
www.jbl.com. For more product information, please visit www.jbl.com to download the full Owner's Manual.

Zawartosc zestawu

1

Soundbar, Sub-woofer, Remote Control, Power
Adaptor, Power Cables*, HDMI Cable, AUX cable,
Wall-Mount Brackets, Product Information &
Wall-mounted guide
* Power cable numbers varied by regions

Place your soundbar

2

2a. Place the Soundbar on the table
2b. Wall mount the SoundBar

Use tape to stick the wall-mounted paper guide on
the wall, push a pen tip throughtthe center to mark
the wall-mounted bracket location and remove the
paper.
Screw the wall mount brackets on the pen mark;
Fixthescrewatthebackofsoundbar;thenhook
the soundbaron the wall.

Connect your soundbar

3

3a. Connect to your TV

HDMI OUT (ARC), HDMI, HDMI (ARC),
OPTICAL IN, OPTICAL, OPTICAL OUT, TV

3b. Connect to other devices

HDMI, AUX cable, AUX-IN, HDMI IN, HDMI OUT
(ARC), AUX-OUT, HDMI OUT, HDMI IN / HDMI
(ARC), Other devices

Power your system

4

Control your soundbar

5

5a. Top Panel

Power, Volume Down, Volume Up, Source

5b. Remote control

1) Power

2) Source

3) Play / Pause

4) Volume -

5) Volume +

6) Previous

7) Next

8) Audio Sync +

9) Audio Snyc -

10) Mute

6

6a. Press RC Bluetooth button to enter Bluetooth

source

6b.

Choose "JBL Bar 2.1" to connect
Remark: Press and hold RC Bluetooth button for
3secondsto

7

Press RC Soundshift button to enable Soundshift
feature. While Soundshift is on, play and pause
your music source to enjoy auto-switch between
your mobile devices (A) and TV (B).

11) Bass -

12) Bass +

13) Sound mode

14) Soundshift On / off

15) Shuffle / Repeat

16) Surround On / off

17) Night mode On / off

18) Dim display

19) Bluetooth

Bluetooth connection

JBL SoundShift

®

8

TV Remote response

Use your own TV remote control to control your
soundbar

8a. For most Samsung, LG, Sony and Vizio TVs

PressandholdRCSURROUNDbuttontoenable
TV remote response.

8b. For other TVs

Program the soundbar to response TV remote
control

1) Press Volume -on the soundbarand press
volume-on the TV remote control

2) For Volume –and Mute, follow the same
procedur ans now the soundbar response
to your TV remote.

Product Specications

9

• Total JBL Bar 2.1 Amplifier Power : 440W

• SPL max: 103dB

• Réponse en fréquence : 40Hz – 20 kHz

• Entrées vidéo HDMI: 3

•

Sortie vidéo HDMI (avec canal de retour audio ARC) : 1

• Version Bluetooth: 3.0

• Portée du Bluetooth : 10 m (32 pi.)

•

Puissance de l'amplificateur de la barre de son: 240 W

• Taille de haut-parleur de barre de son :

58mm (2,25")

• Dimensions de la barre de son (L x P x H) : 1100 x

76 x 97 mm (44" x 3" x 4")

• Poids de la barre de son: 3,4kg (7,5 livres)

• Consommation électrique de la barre de son (veille) :

<0,5W

• Consommation électrique de la barre de son (max) :

60W

• Puissance d'amplification du caisson de graves:

200W

• Taille de haut-parleur de caisson de graves : 200

mm (8")

• Dimensions du caisson de graves (L x P x H) :

320 x 320 x 355,5mm (13" x 13" x 14")

• Poids du caisson de graves: 9,5kg (21 livres)

• Consommation électrique du caisson de graves

(veille): < 0,5 W

• Consommation électrique du caisson de graves

(max): 100W
Dimensions de l'emballage(L x P x H) :

•

1210 x 395 x 520 mm (46" x 16" x 19")

• Poids de l'emballage (brut): 16 kg (35 livres)

Znak i logo Bluetooth®to zastrzezone znaki
towarowe nalezace do firmy Bluetooth SIG, Inc.
uzywane przez firme HARMAN International
Industries, Incorporated na podstawie licencji.
Inne znaki towarowe i nazwy towarowe naleza do
odpowiednich włascicieli.

HDMI, logo HDMI i High-Definition Multimedia
Interface sa znakami towarowymi lub
zastrzezonymi znakami towarowymi firmy HDMI
Licensing LLC w Stanach Zjednoczonych i innych
krajach.

Wyprodukowano na licencji Dolby Laboratories.
Dolby, Dolby Audio oraz symbol podwójnego D sa
znakami handlowymi Dolby Laboratories.

KO 빠른시작가이드

Note: For complete information about using all of your JBL Bar 2.1, download the full Owner’s Manual from
www.jbl.com. For more product information, please visit www.jbl.com to download the full Owner's Manual.

구성품

1

Soundbar, Sub-woofer, Remote Control, Power
Adaptor, Power Cables*, HDMI Cable, AUX cable,
Wall-Mount Brackets, Product Information &
Wall-mounted guide
* Power cable numbers varied by regions

Place your soundbar

2

2a. Place the Soundbar on the table
2b. Wall mount the SoundBar

Use tape to stick the wall-mounted paper guide on
the wall, push a pen tip throughtthe center to mark
the wall-mounted bracket location and remove the
paper.
Screw the wall mount brackets on the pen mark;
Fixthescrewatthebackofsoundbar;thenhook
the soundbaron the wall.

Connect your soundbar

3

3a. Connect to your TV

HDMI OUT (ARC), HDMI, HDMI (ARC),
OPTICAL IN, OPTICAL, OPTICAL OUT, TV

3b. Connect to other devices

HDMI, AUX cable, AUX-IN, HDMI IN, HDMI OUT
(ARC), AUX-OUT, HDMI OUT, HDMI IN / HDMI
(ARC), Other devices

Power your system

4

Control your soundbar

5

5a. Top Panel

Power, Volume Down, Volume Up, Source

5b. Remote control

1) Power

2) Source

3) Play / Pause

4) Volume -

5) Volume +

6) Previous

7) Next

8) Audio Sync +

9) Audio Snyc -

10) Mute

6

6a. Press RC Bluetooth button to enter Bluetooth

source

6b.

Choose "JBL Bar 2.1" to connect
Remark: Press and hold RC Bluetooth button for
3 seconds to

7

Press RC Soundshift button to enable Soundshift
feature. While Soundshift is on, play and pause
your music source to enjoy auto-switch between
your mobile devices (A) and TV (B).

11) Bass -

12) Bass +

13) Sound mode

14) Soundshift On / off

15) Shuffle / Repeat

16) Surround On / off

17) Night mode On / off

18) Dim display

19) Bluetooth

Bluetooth connection

JBL SoundShift

®

8

TV Remote response

Use your own TV remote control to control your
soundbar

8a. For most Samsung, LG, Sony and Vizio TVs

PressandholdRCSURROUNDbuttontoenable
TV remote response.

8b. For other TVs

Program the soundbar to response TV remote
control

1) Press Volume -on the soundbarand press
volume-on the TV remote control

2) For Volume –and Mute, follow the same
procedur ans now the soundbar response
to your TV remote.

Product Specications

9

• Total JBL Bar 2.1 Amplifier Power : 440W

• SPL max: 103dB

• Réponse en fréquence : 40Hz – 20 kHz

• Entrées vidéo HDMI: 3

•

Sortie vidéo HDMI (avec canal de retour audio ARC) : 1

• Version Bluetooth: 3.0

• Portée du Bluetooth : 10 m (32 pi.)

•

Puissance de l'amplificateur de la barre de son: 240 W

• Taille de haut-parleur de barre de son :

58mm (2,25")

• Dimensions de la barre de son (L x P x H) : 1100 x

76 x 97 mm (44" x 3" x 4")

• Poids de la barre de son: 3,4kg (7,5 livres)

• Consommation électrique de la barre de son (veille) :

<0,5W

• Consommation électrique de la barre de son (max) :

60W

• Puissance d'amplification du caisson de graves:

200W

• Taille de haut-parleur de caisson de graves : 200

mm (8")

• Dimensions du caisson de graves (L x P x H) :

320 x 320 x 355,5mm (13" x 13" x 14")

• Poids du caisson de graves: 9,5kg (21 livres)

• Consommation électrique du caisson de graves

(veille): < 0,5 W

• Consommation électrique du caisson de graves

(max): 100W
Dimensions de l'emballage(L x P x H) :

•

1210 x 395 x 520 mm (46" x 16" x 19")

• Poids de l'emballage (brut): 16 kg (35 livres)

Bluetooth®워드 마크와 로고는 Bluetooth SIG,
Inc.가 소유한 등록 상표이며 HARMAN
International Industries, Incorporated는사용

허가를 받고 이러한 마크를 사용합니다. 다른
상표 및 상표명은 해당 소유자의 재산입니다.

HDMI, HDMI 로고 및 High-Definition Multimedia
Interface 명칭은 미국 및 기타 국가에서 HDMI
Licensing LLC의 상표 또는 등록 상표입니다.

Dolby Laboratories의 사용 허가를 받아

생산되었습니다.Dolby,DolbyAudio및이중 D
심볼은 Dolby Laboratories의 등록 상표입니다.

CHS 快速入门指南

Note: For complete information about using all of your JBL Bar 2.1, download the full Owner’s Manual from
www.jbl.com. For more product information, please visit www.jbl.com to download the full Owner's Manual.

产品清单

1

Soundbar, Sub-woofer, Remote Control, Power
Adaptor, Power Cables*, HDMI Cable, AUX cable,
Wall-Mount Brackets, Product Information &
Wall-mounted guide
* Power cable numbers varied by regions

Place your soundbar

2

2a. Place the Soundbar on the table
2b. Wall mount the SoundBar

Use tape to stick the wall-mounted paper guide on
the wall, push a pen tip throughtthe center to mark
the wall-mounted bracket location and remove the
paper.
Screw the wall mount brackets on the pen mark;
Fixthescrewatthebackofsoundbar;thenhook
the soundbaron the wall.

Connect your soundbar

3

3a. Connect to your TV

HDMI OUT (ARC), HDMI, HDMI (ARC),
OPTICAL IN, OPTICAL, OPTICAL OUT, TV

3b. Connect to other devices

HDMI, AUX cable, AUX-IN, HDMI IN, HDMI OUT
(ARC), AUX-OUT, HDMI OUT, HDMI IN / HDMI
(ARC), Other devices

Power your system

4

Control your soundbar

5

5a. Top Panel

Power, Volume Down, Volume Up, Source

5b. Remote control

1) Power

2) Source

3) Play / Pause

4) Volume -

5) Volume +

6) Previous

7) Next

8) Audio Sync +

9) Audio Snyc -

10) Mute

6

6a. Press RC Bluetooth button to enter Bluetooth

source

6b.

Choose "JBL Bar 2.1" to connect
Remark: Press and hold RC Bluetooth button for
3secondsto

7

Press RC Soundshift button to enable Soundshift
feature. While Soundshift is on, play and pause
your music source to enjoy auto-switch between
your mobile devices (A) and TV (B).

11) Bass -

12) Bass +

13) Sound mode

14) Soundshift On / off

15) Shuffle / Repeat

16) Surround On / off

17) Night mode On / off

18) Dim display

19) Bluetooth

Bluetooth connection

JBL SoundShift

®

8

TV Remote response

Use your own TV remote control to control your
soundbar

8a. For most Samsung, LG, Sony and Vizio TVs

PressandholdRCSURROUNDbuttontoenable
TV remote response.

8b. For other TVs

Program the soundbar to response TV remote
control

1) Press Volume -on the soundbarand press
volume-on the TV remote control

2) For Volume –and Mute, follow the same
procedur ans now the soundbar response
to your TV remote.

Product Specications

9

• Total JBL Bar 2.1 Amplifier Power : 440W

• SPL max: 103dB

• Réponse en fréquence : 40Hz – 20 kHz

• Entrées vidéo HDMI: 3

•

Sortie vidéo HDMI (avec canal de retour audio ARC) : 1

• Version Bluetooth : 3.0

• Portée du Bluetooth : 10 m (32 pi.)

•

Puissance de l'amplificateur de la barre de son: 240 W

• Taille de haut-parleur de barre de son :

58mm (2,25")

• Dimensions de la barre de son (L x P x H) : 1100 x

76 x 97 mm (44" x 3" x 4")

• Poids de la barre de son: 3,4kg (7,5 livres)

• Consommation électrique de la barre de son (veille):

<0,5W

• Consommation électrique de la barre de son (max) :

60W

• Puissance d'amplification du caisson de graves:

200W

• Taille de haut-parleur de caisson de graves : 200

mm (8")

• Dimensions du caisson de graves (L x P x H) :

320 x 320 x 355,5mm (13" x 13" x 14")

• Poids du caisson de graves: 9,5kg (21 livres)

• Consommation électrique du caisson de graves

(veille): < 0,5 W

• Consommation électrique du caisson de graves

(max): 100W
Dimensions de l'emballage(L x P x H) :

•

1210 x 395 x 520 mm (46" x 16" x 19")

• Poids de l'emballage (brut): 16 kg (35 livres)

Bluetooth® 文字商标和徽标是 Bluetooth SIG,
Inc. 的注册商标，HARMAN International
Industries, Incorporated 对此 类商标的任何使用
均获取了相应授权。 其他 商标和商标名称是其各
自所有者的财产。

术语 HDMI、HDMI 徽标和 High-Definition
Multimedia Interface 是 HDMI Licensing LLC 在
美国和其他国家/地区的商标或注册商标。

在 Dolby Laboratories 的授权下生产。Dolby 、
Dolby Audio 和双 D 标志是 Dolby Laboratories
的商标。

CHT 快速入門指南

Note: For complete information about using all of your JBL Bar 2.1, download the full Owner’s Manual from
www.jbl.com. For more product information, please visit www.jbl.com to download the full Owner's Manual.

包裝盒內物品

1

Soundbar, Sub-woofer, Remote Control, Power
Adaptor, Power Cables*, HDMI Cable, AUX cable,
Wall-Mount Brackets, Product Information &
Wall-mounted guide
* Power cable numbers varied by regions

Place your soundbar

2

2a. Place the Soundbar on the table
2b. Wall mount the SoundBar

Use tape to stick the wall-mounted paper guide on
the wall, push a pen tip throughtthe center to mark
the wall-mounted bracket location and remove the
paper.
Screw the wall mount brackets on the pen mark;
Fixthescrewatthebackofsoundbar;thenhook
the soundbaron the wall.

Connect your soundbar

3

3a. Connect to your TV

HDMI OUT (ARC), HDMI, HDMI (ARC),
OPTICAL IN, OPTICAL, OPTICAL OUT, TV

3b. Connect to other devices

HDMI, AUX cable, AUX-IN, HDMI IN, HDMI OUT
(ARC), AUX-OUT, HDMI OUT, HDMI IN / HDMI
(ARC), Other devices

Power your system

4

Control your soundbar

5

5a. Top Panel

Power, Volume Down, Volume Up, Source

5b. Remote control

1) Power

2) Source

3) Play / Pause

4) Volume -

5) Volume +

6) Previous

7) Next

8) Audio Sync +

9) Audio Snyc -

10) Mute

6

6a. Press RC Bluetooth button to enter Bluetooth

source

6b.

Choose "JBL Bar 2.1" to connect
Remark: Press and hold RC Bluetooth button for
3secondsto

7

Press RC Soundshift button to enable Soundshift
feature. While Soundshift is on, play and pause
your music source to enjoy auto-switch between
your mobile devices (A) and TV (B).

11) Bass -

12) Bass +

13) Sound mode

14) Soundshift On / off

15) Shuffle / Repeat

16) Surround On / off

17) Night mode On / off

18) Dim display

19) Bluetooth

Bluetooth connection

JBL SoundShift

®

8

TV Remote response

Use your own TV remote control to control your
soundbar

8a. For most Samsung, LG, Sony and Vizio TVs

PressandholdRCSURROUNDbuttontoenable
TV remote response.

8b. For other TVs

Program the soundbar to response TV remote
control

1) Press Volume -on the soundbarand press
volume-on the TV remote control

2) For Volume –and Mute, follow the same
procedur ans now the soundbar response
to your TV remote.

Product Specications

9

• Total JBL Bar 2.1 Amplifier Power : 440W

• SPL max: 103dB

• Réponse en fréquence : 40Hz – 20 kHz

• Entrées vidéo HDMI: 3

•

Sortie vidéo HDMI (avec canal de retour audio ARC) : 1

• Version Bluetooth: 3.0

• Portée du Bluetooth : 10 m (32 pi.)

•

Puissance de l'amplificateur de la barre de son: 240 W

• Taille de haut-parleur de barre de son :

58mm (2,25")

• Dimensions de la barre de son (L x P x H) : 1100 x

76 x 97 mm (44" x 3" x 4")

• Poids de la barre de son: 3,4kg (7,5 livres)

• Consommation électrique de la barre de son (veille) :

<0,5W

• Consommation électrique de la barre de son (max) :

60W

• Puissance d'amplification du caisson de graves:

200W

• Taille de haut-parleur de caisson de graves : 200

mm (8")

• Dimensions du caisson de graves (L x P x H) :

320 x 320 x 355,5mm (13" x 13" x 14")

• Poids du caisson de graves: 9,5kg (21 livres)

• Consommation électrique du caisson de graves

(veille): < 0,5 W

• Consommation électrique du caisson de graves

(max): 100W
Dimensions de l'emballage(L x P x H) :

•

1210 x 395 x 520 mm (46" x 16" x 19")

• Poids de l'emballage (brut): 16 kg (35 livres)

Bluetooth® 文字商标和徽标是 Bluetooth SIG,
Inc. 的注册商标，HARMAN International
Industries, Incorporated 对此 类商标的任何使用
均获取了相应授权。 其他 商标和商标名称是其各
自所有者的财产。

術語 HDMI、HDMI 標誌及 High-Definition
Multimedia Interface 是 HDMI Licensing LLC 在
美國及其他國家/地區的商標或註冊商標。

「根據 Dolby Laboratories 的授權而製造。
Dolby、Dolby Audio 與雙D 符號是Dolby
Laboratories 的商標。」

ID Panduan Memulai Cepat

Note: For complete information about using all of your JBL Bar 2.1, download the full Owner’s Manual from
www.jbl.com. For more product information, please visit www.jbl.com to download the full Owner's Manual.

Isi Kotak

1

Soundbar, Sub-woofer, Remote Control, Power
Adaptor, Power Cables*, HDMI Cable, AUX cable,
Wall-Mount Brackets, Product Information &
Wall-mounted guide
* Power cable numbers varied by regions

Place your soundbar

2

2a. Place the Soundbar on the table
2b. Wall mount the SoundBar

Use tape to stick the wall-mounted paper guide on
the wall, push a pen tip throughtthe center to mark
the wall-mounted bracket location and remove the
paper.
Screw the wall mount brackets on the pen mark;
Fixthescrewatthebackofsoundbar;thenhook
the soundbaron the wall.

Connect your soundbar

3

3a. Connect to your TV

HDMI OUT (ARC), HDMI, HDMI (ARC),
OPTICAL IN, OPTICAL, OPTICAL OUT, TV

3b. Connect to other devices

HDMI, AUX cable, AUX-IN, HDMI IN, HDMI OUT
(ARC), AUX-OUT, HDMI OUT, HDMI IN / HDMI
(ARC), Other devices

Power your system

4

Control your soundbar

5

5a. Top Panel

Power, Volume Down, Volume Up, Source

5b. Remote control

1) Power

2) Source

3) Play / Pause

4) Volume -

5) Volume +

6) Previous

7) Next

8) Audio Sync +

9) Audio Snyc -

10) Mute

6

6a. Press RC Bluetooth button to enter Bluetooth

source

6b.

Choose "JBL Bar 2.1" to connect
Remark: Press and hold RC Bluetooth button for
3secondsto

7

Press RC Soundshift button to enable Soundshift
feature. While Soundshift is on, play and pause
your music source to enjoy auto-switch between
your mobile devices (A) and TV (B).

11) Bass -

12) Bass +

13) Sound mode

14) Soundshift On / off

15) Shuffle / Repeat

16) Surround On / off

17) Night mode On / off

18) Dim display

19) Bluetooth

Bluetooth connection

JBL SoundShift

®

8

TV Remote response

Use your own TV remote control to control your
soundbar

8a. For most Samsung, LG, Sony and Vizio TVs

PressandholdRCSURROUNDbuttontoenable
TV remote response.

8b. For other TVs

Program the soundbar to response TV remote
control

1) Press Volume -on the soundbarand press
volume-on the TV remote control

2) For Volume –and Mute, follow the same
procedur ans now the soundbar response
to your TV remote.

Product Specications

9

• Total JBL Bar 2.1 Amplifier Power : 440W

• SPL max: 103dB

• Réponse en fréquence : 40Hz – 20 kHz

• Entrées vidéo HDMI: 3

•

Sortie vidéo HDMI (avec canal de retour audio ARC) : 1

• Version Bluetooth : 3.0

• Portée du Bluetooth : 10 m (32 pi.)

•

Puissance de l'amplificateur de la barre de son: 240 W

• Taille de haut-parleur de barre de son :

58mm (2,25")

• Dimensions de la barre de son (L x P x H) : 1100 x

76 x 97 mm (44" x 3" x 4")

• Poids de la barre de son: 3,4kg (7,5 livres)

• Consommation électrique de la barre de son (veille):

<0,5W

• Consommation électrique de la barre de son (max) :

60W

• Puissance d'amplification du caisson de graves:

200W

• Taille de haut-parleur de caisson de graves : 200

mm (8")

• Dimensions du caisson de graves (L x P x H) :

320 x 320 x 355,5mm (13" x 13" x 14")

• Poids du caisson de graves: 9,5kg (21 livres)

• Consommation électrique du caisson de graves

(veille): < 0,5 W

• Consommation électrique du caisson de graves

(max): 100W
Dimensions de l'emballage(L x P x H) :

•

1210 x 395 x 520 mm (46" x 16" x 19")

• Poids de l'emballage (brut): 16 kg (35 livres)

Merek dan logo Bluetooth®adalah merek dagang
terdaftar milik Bluetooth SIG, Inc., dan segala
bentuk penggunaan merek tersebut oleh
HARMAN International Industries, Incorporated
telah berdasarkan lisensi. Merek dagang dan
nama dagang lainnya merupakan milik
masing-masing pemiliknya.

Istilah HDMI, logo HDMI, dan High-Definition
Multimedia Interface adalah merek dagang atau
merek dagang terdaftar milik HDMI Licensing LLC
di Amerika Serikat dan negara-negara lainnya.

Dibuat berdasarkan lisensi dari Dolby
Laboratories. Dolby, Dolby Audio, dan simbol
D-ganda adalah merek dagang milik Dolby
Laboratories.

ﻊﻳﴪﻟا ﻞﻴﻐﺸﺘﻟا ﻞﻴﻟد

AR

Note: For complete information about using all of your JBL Bar 2.1, download the full Owner’s Manual from
www.jbl.com. For more product information, please visit www.jbl.com to download the full Owner's Manual.

 

1

Soundbar, Sub-woofer, Remote Control, Power
Adaptor, Power Cables*, HDMI Cable, AUX cable,
Wall-Mount Brackets, Product Information &
Wall-mounted guide
* Power cable numbers varied by regions

Place your soundbar

2

2a. Place the Soundbar on the table
2b. Wall mount the SoundBar

Use tape to stick the wall-mounted paper guide on
the wall, push a pen tip throughtthe center to mark
the wall-mounted bracket location and remove the
paper.
Screw the wall mount brackets on the pen mark;
Fixthescrewatthebackofsoundbar;thenhook
the soundbaron the wall.

Connect your soundbar

3

3a. Connect to your TV

HDMI OUT (ARC), HDMI, HDMI (ARC),
OPTICAL IN, OPTICAL, OPTICAL OUT, TV

3b. Connect to other devices

HDMI, AUX cable, AUX-IN, HDMI IN, HDMI OUT
(ARC), AUX-OUT, HDMI OUT, HDMI IN / HDMI
(ARC), Other devices

Power your system

4

Control your soundbar

5

5a. Top Panel

Power, Volume Down, Volume Up, Source

5b. Remote control

1) Power

2) Source

3) Play / Pause

4) Volume -

5) Volume +

6) Previous

7) Next

8) Audio Sync +

9) Audio Snyc -

10) Mute

6

6a. Press RC Bluetooth button to enter Bluetooth

source

6b.

Choose "JBL Bar 2.1" to connect
Remark: Press and hold RC Bluetooth button for
3secondsto

7

Press RC Soundshift button to enable Soundshift
feature. While Soundshift is on, play and pause
your music source to enjoy auto-switch between
your mobile devices (A) and TV (B).

11) Bass -

12) Bass +

13) Sound mode

14) Soundshift On / off

15) Shuffle / Repeat

16) Surround On / off

17) Night mode On / off

18) Dim display

19) Bluetooth

Bluetooth connection

JBL SoundShift

®

8

TV Remote response

Use your own TV remote control to control your
soundbar

8a. For most Samsung, LG, Sony and Vizio TVs

Press and hold RC SURROUND button to enable
TV remote response.

8b. For other TVs

Program the soundbar to response TV remote
control

1) Press Volume -on the soundbarand press
volume-on the TV remote control

2) For Volume –and Mute, follow the same
procedur ans now the soundbar response
to your TV remote.

Product Specications

9

• Total JBL Bar 2.1 Amplifier Power : 440 W

• SPL max: 103dB

• Réponse en fréquence : 40Hz – 20 kHz

• Entrées vidéo HDMI: 3

•

Sortie vidéo HDMI (avec canal de retour audio ARC) : 1

• Version Bluetooth : 3.0

• Portée du Bluetooth : 10 m (32 pi.)

•

Puissance de l'amplificateur de la barre de son: 240 W

• Taille de haut-parleur de barre de son :

58mm (2,25")

• Dimensions de la barre de son (L x P x H) : 1100 x

76 x 97 mm (44" x 3" x 4")

• Poids de la barre de son: 3,4kg (7,5 livres)

• Consommation électrique de la barre de son (veille):

<0,5W

• Consommation électrique de la barre de son (max) :

60W

• Puissance d'amplification du caisson de graves:

200W

• Taille de haut-parleur de caisson de graves : 200

mm (8")

• Dimensions du caisson de graves (L x P x H) :

320 x 320 x 355,5mm (13" x 13" x 14")

• Poids du caisson de graves: 9,5kg (21 livres)

• Consommation électrique du caisson de graves

(veille): < 0,5 W

• Consommation électrique du caisson de graves

(max): 100W
Dimensions de l'emballage(L x P x H) :

•

1210 x 395 x 520 mm (46" x 16" x 19")

• Poids de l'emballage (brut): 16 kg (35 livres)

ﺔﻛﴩﻟ ﺔﻛﻮﻠﻤﻣو ﺔﻠﺠﺴﻣ ﺔﻳرﺎﺠﺗ تﺎﻣﻼﻋﺎﻬﺗارﺎﻌﺷو Bluetooth® ﺔﻤﻠﻛ

HARMAN ﻦﻣ تﺎﻣﻼﻌ ﻠﻟ ماﺪﺨﺘﺳا يأو .Bluetooth SIG. Inc

.ﺺﻴﺧﺮﺗ ﺐﺟﻮ لﻮﺨﻣ International Industries, Incorporated

.ﻴﻨﻌﳌا ﺎﻬﺑﺎﺤﺻﻷ ﺔﻛﻮﻠﻤﻣ ىﺮﺧﻷا ﺔﻳرﺎﺠﺘﻟا ءﺳﻷاو تﺎﻣﻼﻌﻟا ﻞﻛو

High-Denition Multimedia Interface و HDMI ةرﺎﺒﻌﻟا

ﺔﻠﺠﺴﻣ ﺔﻳرﺎﺠﺗ تﺎﻣﻼﻋ وأ ﺔﻳرﺎﺠﺗ تﺎﻣﻼﻋ HDMI رﺎﻌﺸﻟاوHDMI

ناﺪﻠﺒﻟاو ةﺪﺤﺘﳌا تﺎﻳﻻﻮﻟا ﰲ HDMI Licensing LLC ﺔﻛﴩﻟ

ﱪﺘﻌﺗ .Dolby Laboratories ﺔﻛﴍ ﻦﻣ ﺺﻴﺧﺮﺗ ﺐﺟﻮ ﻊﻨُﺻ

ﺔﻛﴩﻟ ﺔﻳرﺎ ﺠﺗ تﺎﻣﻼﻋ double-D ﺰﻣرو ،Dolby Audioو ،Dolby

.ىﺮﺧﻷا

.Dolby Laborator ies