Harley Benton GA 15, GA 5 Owner's Manual

Owner‘s Manual
All Tube Guitar Combo Amp
GA 15
2
Introduction
Congratulations on your purchase of our guitar combo amp. With your GA 15 you can easily perform your music with great tone. Despite its compact
dimensions, this model reects vintage amp design and our unwavering
commitment to high quality.
The Harley Benton GA 15 provides Class AB tube amplication. Its engineering
philosophies represent a great deal of high quality and ease of operation while
maintaining exibility in tone. The GA 15 maintains a simple overall architecture inspired by classic amplier design and crafting but is further enhanced by
modern techniques.
X Power: 15 watt, class AB X 3 band EQ, volume control X 1 x 10” speaker X Connections: Line out, effects loop, speaker out, (4, 8, 16 ohm), head phones X Tubes: 2 x 12AX7 (preamp), 2 x EL84 (power amp)
To achieve the best performance and safety operation, you should read all of this manual before using it in a live situation.
Safety instructions
For your own safety you must read this section in full rst!
Risk of electrical shock.
• Connect the device only to a properly wired and earthed electrical wall socket providing the mains voltage indicated on the rear panel.
• NEVER operate the device if the power plug or the power cord is damaged.
• NEVER submerse the device in water. Wipe it only with a slightly damp
cloth. Liquid getting into the amp will risk a short circuit and will be hazardous.
• NEVER expose the device to direct precipitation or moisture and never use it in a damp or wet environment.
Ensure that the power cord does not become wet during operation.
• Do not subject the amp to high temperatures, direct sunlight, severe vibrations, shocks or tremors, or excessive dust.
• You must NEVER open the housing of the device or try to repair it. There are no user serviceable parts inside. Warranty will become void if you open the
housing.
• Do not place objects containing uids, e.g. ower vases or beer bottles, on or near the device.
GA 15
3
Notice regarding power disconnection To completely disconnect the device from the mains power source the power plug must be removed from the power socket. For this reason the device
must be placed in a position where a constant unobstructed access to the power socket is assured, thus in an emergency situation you are able to
immediately pull out the power plug. To eliminate the risk of re you should
completely disconnect the power plug from the power socket when the
device is not going to be used.
Always grasp the power cord by the plug. Do not pull on the cord itself and never touch the power cord with wet hands as this could result in a short circuit or an electrical shock. Do not place the device, speaker cabinets or
anything else on the power cord and make sure that it does not become clamped. Place the power cord in a position where it can not be trod on.
A damaged power cord can cause a re or an electrical shock. Check
the power cord from time to time. Should it become damaged contact our
customer service centre to have it replaced.
• Never manipulate the power cord of the plug. If a power cord is provided with an earth lead, this is mandatory to ensure safe operation!
 Riskofre!
• NEVER leave the device unattended while it is switched on.
• Never cover the ventilation slots of the device while it is switched on. Avoid placing this device in locations that provide insufcient ventilation or hot locations and do not place the device in direct sunlight or under strong articial light sources. Otherwise, it may overheat and become irreparably
damaged.
• Do not place any open sources of re, like candles, on the device.
When a thunderstorm with the risk of lightening threatens please disconnect the device from the mains power.
 Riskofpersonalinjury!
• Keep the power cable and device away from children. Children frequently
underestimate the dangers of electrical equipment.
• Ensure a safe location for the device.
• Do not operate the device if it has sustained a fall or is damaged. Arrange for the device to be checked and/or repaired by qualied technicians.
• Important! Keep sufcient distance from the device when operated with high volume level. Listening to music with high sound pressure level may cause permanent damage to your hearing!
 Riskofdamage!
• Valve amps like GA 15 must never be operated without a proper speaker load. The actual impedance of the connected speaker load must exactly match the chosen speaker out socket (4, 8, or 16 ohm). Otherwise the amplier will be seriously damaged.
Loading...
+ 5 hidden pages