Harken LokHead 500 KIT.US, INLH500KIT.US, Winch LokHead 500 KIT Instruction Manual

Winch LokHead 500 KIT.US
Instruction Manual
Please read these instructions carefully before operating equipment.
INLH500KIT.US
Original Instructions
UINLH500KIT.US-00 28-05-2019
Index
About This Manual ����������������������������������������������������������������������������������������������������������������������������5 Glossary and Symbols �����������������������������������������������������������������������������������������������������������������������5
Identification Data on the Device �������������������������������������������������������������������������������������������������������6 Technical Support Information �����������������������������������������������������������������������������������������������������������7
General Advice �����������������������������������������������������������������������������������������������������������������������������������8 Intended Use ��������������������������������������������������������������������������������������������������������������������������������������8 Improper Use �������������������������������������������������������������������������������������������������������������������������������������8
Personal Protective Equipment (PPE) ������������������������������������������������������������������������������������������������9 Residual Risks �����������������������������������������������������������������������������������������������������������������������������������9
Winch LokHead 500 KIT HL (INLH500KITHL) ................................................................... 10
System Description ��������������������������������������������������������������������������������������������������������������������������10
Parts Description ���������������������������������������������������������������������������������������������������������������������������������������10
Outline ���������������������������������������������������������������������������������������������������������������������������������������������11
Standard Configuration ����������������������������������������������������������������������������������������������������������������������������� 11
Tripod Use Configuration �������������������������������������������������������������������������������������������������������������������������� 12
Minimum Breaking Strenght (MBS) ������������������������������������������������������������������������������������������������13 Maximum Working Load (MWL) ������������������������������������������������������������������������������������������������������������13 Rope Requirements ��������������������������������������������������������������������������������������������������������������������������13 Technical Data ���������������������������������������������������������������������������������������������������������������������������������13 Lokhead Winch Installation��������������������������������������������������������������������������������������������������������������14
Mounting Surface �������������������������������������������������������������������������������������������������������������������������������������14
Winch Entry Angle of Lifting Rope ������������������������������������������������������������������������������������������������������������ 14
Winch Location ����������������������������������������������������������������������������������������������������������������������������������������� 14
Mounting Template - Plate Adapter ���������������������������������������������������������������������������������������������������������� 14
Installation Procedure ������������������������������������������������������������������������������������������������������������������������������� 15
Positing the control lever �����������������������������������������������������������������������������������������������������������������19 Using The Device - Checking The Device Before Use ���������������������������������������������������������������������20 Lifting Load ��������������������������������������������������������������������������������������������������������������������������������������21 Lowering Load ���������������������������������������������������������������������������������������������������������������������������������23 Maintenance ������������������������������������������������������������������������������������������������������������������������������������24
Wash ��������������������������������������������������������������������������������������������������������������������������������������������������������� 24
Maintenance Schedule ����������������������������������������������������������������������������������������������������������������������������� 24
Handling ������������������������������������������������������������������������������������������������������������������������������������������24 Storage���������������������������������������������������������������������������������������������������������������������������������������������24 Maintenance Schedule ���������������������������������������������������������������������������������������������������������������������25
Worldwide Limited Warranty .............................................................................................. 29
3ENGLISH28-05-19
4 ENGLISH 28-05-19
Introduction
ABOUT THIS MANUAL
This User Manual is an integral part of the device and aims to provide all the information needed for its safe and correct use and for proper maintenance�
If there are instructions you do not understand, contact Harken�
Keep the manual in a safe place for future consultation� This manual may be modified without notice� Updated versions are available on www�harkenindustrial�com�
This manual is for qualified operators (refer to the Safety Information chapter for more information)� Improper use of the device or incorrect maintenance could cause severe damage or death�
Harken accepts no responsibility for damage, personal injury or death caused by failure to observe the safety information and instructions in this Manual�
The manufacturer cannot be liable for damage, injury or consequential loss resulting from installation or servicing by unqualified personnel�
The manufacturer will also not be liable for damage, injury, or consequential loss resulting from incorrect operation or modification of the equipment�
GLOSSARY AND SYMBOLS
Intended Use - use of the device according to the information supplied in the instructions for use�
Improper Use - use of the device in a way different from that indicated in the instructions for use�
Qualified Operator - people who have attended specialisation, training, courses, etc� and are qualified for using lifting people
devices to the current regulations of the Nation in which the device is used for rescue�
General User - a user that use the device to lifting loads
Text preceded by the following symbols contains very important information or instructions, especially in regards to safety�
Failure to observe these may lead to:
- danger for operators
- invalidity of the contract warranty
- refusal of the manufacturer to accept responsability
WARNING!
this denotes the existence of the potential danger, which could cause injury or damage if the information or instructions are not followed
NOTE!
this denotes important information concerning the device
5ENGLISH28-05-19
General Information
IDENTIFICATION DATA ON THE DEVICE
Each device is identified by a laser marking on plate of the winch�
Always quote these references when contacting the manufacturer or service centres�
1� Name of product/model
2� Standard
3� Safety information on the diameter of the rope to use: minimum 11 mm, maximum 12,5 mm: this rope must be EN 1891
certified
4� Indicator of the Minimum Breaking Strength (MBS) of the device (reference to the NFPA certification from UL), with specific
load for lifting load and lifting person
5� Serial number; the last two numbers are used for the year of manufacture of the device (e�g� 15 = the year 2015)
6� Pictogram instructing you to read the manual before using the device
7� Certification laboratory mark
8� UL file number
6 ENGLISH 28-05-19
General Information
TECHNICAL SUPPORT INFORMATION
LokHead Winch is covered by a warranty, as laid down in the general conditions of sale� If during the warranty period the device proves defective or suffers breakages, as indicated in the warranty, the manufacturer, after checking the device, will repair or replace the defective components� You are reminded that modifications carried out by the user, without explicit written authorisation from the manufacturer, will invalidate the warranty and relieve the manufacturer of any responsibility for damage caused by the defective product� The same considerations apply when spare parts that are not original or different from those explicitly indicated by the manufacturer� For all these reasons we advise customers to contact Harken Technical Support�
WARNING!
read the instructions in this manual attentively and carefully follow the indications it contains before using the LokHead Winch.
THE INLH500KIT�US MEETS THE AUXILLARY EQUIPMENT REQUIREMENTS OF NFPA 1983, STANDARD ON LIFE SAFETY ROPE AND EQUIPMENT FOR EMERGENCY SERVICES, 2017 EDITION�
TO BE COMPLIANT WITH NFPA 1983, THE FOLLOWING ADDITIONAL COMPONENTS MUST BE USED IN CONJUNCTION WITH THIS WINCH: Any NFPA UL Certified Carabiner and Strap�
Emergency Service Auxilliary Equipment In Accordance with NFPA 1983-2017
NOTE!
The user can find additional information regarding auxiliary equipment in NFPA 1500 and NFPA 1983�
MBS 22kN "T"
7ENGLISH28-05-19
Safety Information
GENERAL ADVICE
Use of the LokHead Winch for lifting people, in rescue situation, is restricted to qualified operators who have attended specialist, training, courses, etc� and are qualified for using rescue lifiting devices to the current regulations of the Nation in which the device is used for rescue�
Use of the LokHead Winch for lifting loads is permitted to a general user in accordance with National Regulations & Working Guidelines/Practices�
Harken is not responsible for damage caused by the LokHead Winch to people, animals or property in the case of:
- use of the LokHead Winch by operators not qualified operators for liting people
- improper use of the LokHead Winch
- lack of proper maintenance, as indicated in the Maintenance chapter of this Manual
- unauthorised modifications or changes
- use of spare parts that are not original or specific for the model
- total or partial failure to observe the instructions
- usage contrary to specific national regulations
INTENDED USE
This winch is designed to be used as a manually powered, rope-handling winch for lifting, lowering, and pulling loads�
Moreover the LokHead Winch is designed and compliant to be used in rescue operation, by a qualified operator�
The LokHead Winch must be used after being mounted on a suitable anchorage point�
All the equipment and anchor devices used in conjunction with the Lokhead winch to lift person in rescue operation , must be certified for their intended use in the rescue operation�
IMPROPER USE
The winch must not be used:
- for purposes different from those outlined in “Intended use” chapter, or for purposes not mentioned in this manual or different from those mentioned
- if unauthorised modifications or interventions have been carried out
- in an explosive atmosphere
- after it has fallen from a height of more than 1 meter onto a hard surface� In this case the device must be returned to the manufacturer or to a Harken authorised repair centre
- with wire rope
- with loads in excess of the Minimum Breaking Strength (MBS) of 22 kN (reference to the NFPA certification from UL) for lifting persons in rescue operation
WARNING!
Subjecting the winch to loads above the Minimum Breaking Strength (MBS) can cause the winch to fail or pull off the mounting surface suddenly, possibly resulting in severe injury or death.
8 ENGLISH 28-05-19
Safety Information
PERSONAL PROTECTIVE EQUIPMENT (PPE)
It is necessary use gloves when operating the device�
RESIDUAL RISKS
You must pay attention to the following residual risks present when using LokHead Winch:
WARNING! Rotating Parts Trapping Risk
Always wear clothing and protective gloves that are form fitting. Avoid loose gloves or clothing and always follow the instructions in the manual.
9ENGLISH28-05-19
Loading...
+ 20 hidden pages