8685/8686 Portable Dock Box
Assembly Instructions
5025 11-13
PARTS
8685 Portable Dock Box (38" x 23" x 18")
QTY Description
4 1/4" x 28" Round Battens
4 1/4" x 38" Round Battens
8 Black Webbing Corner Sleeves
PARTS
8686 Portable Dock Box (66" x 23" x 18")
4 1/4" x 28" Round Battens
4 1/4" x 66" Round Battens
8 Black Webbing Corner Sleeves
2 18" Black Webbing Center Battens
Assembly 8685/8686
1) Assemble first stiffener rectangle. Push one 38" (97 cm)
or one 66" (168 cm) white batten halfway into Black Webbing
Corner Sleeve. Next, push one 28" ( 71 cm) white batten
into other end of sleeve. Finish building rectangle using three
sleeves and two rods (see photo below).
2) Build second stiffener rectangle in same fashion using
remaining two 28" (71 cm) and two 38" (97 cm) or
66" (168 cm) white battens and four Black Webbing
Corner Sleeves.
28" (71 cm)
8685 – 38" (97 cm)
8686 – 66" (168 cm)
3) Insert first rectangle into the Portable Dock Box. Place
the long side of rectangle on long-side bottom seam at
back of box. Make sure frame fits snugly into corners.
4) Position other long
side of rectangle under
top front lip of box,
making sure that frame
fits into corners.
2