Hark Barrel Spit HK0529 Assembly And Operation Instructions Manual

ASSEMBLY AND OPERATION
INSTRUCTIONS

BARREL SPIT

Barrel spit

Warranty Details

Hark Enterprises Pty Ltd warrants that this genuine HARK® brand product is free from

defects in workmanship and materials for 12 months from the date of purchase.

If as a result of normal use in compliance with the manufacturer’s instructions the product

fails to operate within the warranty period, we will repair or replace the product. This

warranty does not extend to cover any damage due to burn out or rust.

Our goods come with guarantees that cannot be excluded under the Australian Consumer

Law.

You are entitled to a replacement or refund for a major failure and for compensation for

any other reasonably foreseeable loss or damage. You are also entitled to have the goods

repaired or replaced if the goods fail to be of acceptable quality and the failure does not

amount to a major failure.

The benets given to you in this warranty are in addition to other rights and remedies in

respect of the product that the consumer has under the Competition and Consumer Act

2010 and similar state and territory laws.

In the event of a product failure, the goods should be returned at your cost to the original

place of purchase, with specic details of the complaint, and a copy of the purchase

receipt.

After Sales Support

Hark Enterprises Pty Ltd

Telephone: [phone]
[phone]
Email: [e-mail]

YEAR

WARRANTY

4

Model No.: HK0529
Product Name: BARREL SPIT

FOR OUTDOOR USE ONLY. PLEASE READ INSTRUCTIONS CAREFULLY BEFORE
ASSEMBLING. RETAIN THIS MANUAL FOR FUTURE REFERENCE.

Tools needed for assembly

Phillips Head Screwdriver (not included)

Before assembly

Please read all instructions thoroughly before proceeding.

Find a large, clean area in which to assemble your Barrel Spit. Please refer to the parts list and

assembly diagram as necessary.

Ensure any transit protection or packaging is removed.

Do not throw out any packaging until the Barrel Spit is fully assembled in case parts are still

enclosed.

Line drawings are not to scale. Actual products may differ from drawing depending on the model purchased.

Specications are subject to change without notice.