Hardy Process Solutions HI 1734-WS Quick Start Manual

HI 1734-WS Quick Start Guide

HI1734-WS POINT I/O Weigh Scale Module is used for high quality front
end signal processing of load cells and load points (strain-gage type
sensors) for all types of industrial manufacturing weighing applications
through an Allen Bradley 1734 POINT I/O chassis.

This Quick Start Guide is designed for users of the HI 1734-WS module
that have a high degree of familiarity with Allen Bradley 1734 POINT I/O
systems and Hardy Process Solutions products. The Quick Start Guide
provides basic procedures for installing, configuring, and operating a
HI1734-WS POINT I/O Weigh Scale Module.

A complete Installation and Operation Manual can be found online:

www.hardysolutions.com, navigate to Products > PLC Weighing

Modules > Weight Modules> HI 1734-WS > Documents and Programs

Hardy Process Solutions sincerely appreciates your business. We encourage
input about the performance and operation of our products from our
customers. Should you not understand any information in this guide or
experience any problems with this product, please contact our Technical
Support Dept. at:

Phone: [phone]

Toll Free: 1-800-821-5831

FAX: [phone]

E-Mail: [e-mail]

Or visit our web site at:

http://www.hardysolutions.com

Proudly made in the U.S.A

PN 0596-0355-01 Rev. A

Notes:

CAUTION: UNPACK WITH CARE

PARTS ARE STATIC SENSITIVE!

Observe the following handling precautions:

x Wear an approved wrist-strap grounding device when handling

the module

x Touch a grounded object to rid yourself of any electrostatic

discharge prior to handling the module

x Handle the module from the bezel in front away from the

connector. Never touch the connector pins.

x Do not install the module right next to an AC or high voltage DC

module

x Route all the load voltage cables away from high voltage cables

WHEN UNPACKING, DO NOT DISCARD THE PACKING CASE OR ANY
PACKING MATERIAL UNTIL THE CONTENTS OF THE PACKING CASE ARE
INSPECTED AND CAREFULLY COMPARED WITH THE SHIPPING
DOCUMENTS.

IF ANYTHING IS UNSATISFACTORY, PLEASE NOTIFY HARDY IMMEDIATELY
BY CALLING, FAXING OR E-MAILING TO:

Customer Support Department
HARDY PROCESS SOLUTIONS
9440 Carroll Park Drive, Suite 150
San Diego, California 92121

Phone:

(

800) 821-5831
[phone]
FAX:

(

858) 278-6700

E-mail: [e-mail]
Web Address: www.hardysolutions.com