Half Moon Lazy Susan
Installation Instructions
for the HMLS Wood Series
Prior to Installation
IMPORTANT:
Before you begin, make sure you familiarize yourself with all the
parts and fully read the instructions.
CUSTOMER SERVICE:
Toll-free customer help line available weekdays between
7:00am and 6:00pm Central Time at 800-463-0660.
TOOLS NECESSARY:
Screw gun or Phillips screwdriver. NOTE: If screw gun has a
clutch, set to lowest setting so as not to over tighten and/or
strip screws.
PARTS IDENTIFICATION:
4
1
Do I have a Left Hand or Right Hand opening?
Left Hand
blind corners
have the
opening
on the left.
STEP 1 - Determine Left or Right Hand Installation
Left Hand Shelf and Bracket Mount
Right Hand
blind corners
have the
opening
on the right.
Remove black shipping screws as shown above before
beginning installation
NOTE: The Half Moon Lazy Susan ships ready to
install as a Left Hand model. Apply rst set of screws on
A,B or C when converting to Right Hand model.
Attach second set of screws where they are positioned.
Left Hand model Right Hand model
2 5 8
C B A
5
2
6
3
1 Wood Shelf Assembly qty 2
2 Pole qty 1
3 Lower Hub Assembly qty 1
4 Upper Hub Assembly qty 1
5 #8 X 5/8” Pan Head Phillips Wood Screws qty 4
6 #8 X 5/8” Flat Head Phillips Wood Screws qty 5
Right Hand Shelf and Bracket Mount
To prepare the unit for Right Hand installation, remove the screws mounting the slides to the shelf and reattach the slides to the
shelf as shown above. Then loosen the four screws that attach the metal casting bracket to the shelf and slide the casting bracket to
the proper location shown on the illustration and chart above. Re-tighten the screws.
2 5 8
Model # Position
Left
Hand
3212 2
3515 5
3818 8
C B A
Model # Position
Right
Hand
3212 A
3515 B
3818 C
STEP 2 -
STEP 4 - Install Lower Shelf
STEP 5 - Install Upper Hub
Determine upper shelf height
1/4
MINIMUM
POLE
PROTRUSION
17-9/16
MAXIMUM
WOOD
TRAY
SYSTEM
HEIGHT
13/16
MINIMUM HEIGHT CLEARANCE
ABOVE THE CABINET FLOOR
1-3/32
DOOR HINGE
KEEPOUT REGION
Using the diagram as a guide, determine the desired height position of the upper
shelf and make a light pencil market on the side of the face-frame.
2-11/16
DOOR HINGE
KEEPOUT
REGION
13-3/8
MAXIMUM
UPPER
WOOD
TRAY
ADJUSTABLE
HEIGHT
Assembly
Place one of the Shelf Assemblies on top of the Lower
Hub Assembly and secure in position by sliding the
pole through the center, pushing rmly until the pole is
at the bottom of the cabinet.
STEP 6 - Install Upper Shelf Assembly
Assembly
Slide the Upper Hub Assembly onto the pole and
position the bottom of the bracket on the line drawn
previously. Firmly secure with ve #8 X 5/8” Flat Head
Phillis Wood screws provided.
STEP 3 - Install Lower Hub Assembly
Place the Lower Hub Assembly tight against the back corner of the face frame (the
panel divider in frameless applications) and rmly secure with 4 four #8 X 5/8” Pan
Head Phillips Wood screws provided as shown above.
Slide the Upper Shelf Assembly onto the pole. Securely tighten both hub set screws as shown.
HMLSW10/20 v.2
Loading...