Page 1
20” ROLLING FLOOR SWEEP
Model
99989
ASSEMBLY, OPERATING, AND MAINTENANCE
INSTRUCTIONS
Diagrams within this manual may not be drawn proportionally.
Due to continuing improvements, actual product may differ slightly from the product described herein.
Distributed exclusively by Harbor Freight Tools®.
3491 Mission Oaks Blvd., Camarillo, CA 93011
Visit our website at: http://www.harborfreight.com
Read this material before using this product.
Failure to do so can result in serious injury.
SAVE THIS MANUAL.
Copyright© 2008 by Harbor Freight Tools®. All rights reserved. No portion of this
manual or any artwork contained herein may be reproduced in any shape or form
without the express written consent of Harbor Freight Tools.
For technical questions or replacement parts, please call 1-800-444-3353.
Page 2
SAVE THIS MANUAL
Keep this manual for the safety warnings and precautions, assembly, operating, inspection, maintenance and cleaning
procedures. Write the product’s serial
number in the back of the manual near the
assembly diagram (or month and year of
purchase if product has no number). Keep
this manual and the receipt in a safe and
dry place for future reference.
CAUTION, used
with the safety
alert symbol,
indicates a hazardous
situation which, if not
avoided, could result in minor
or moderate injury.
NOTICE is used to
address practices
not related to
personal injury.
IMPORTANT SAFETY
INSTRUCTIONS
In this manual, on the labeling,
and all other information
provided with this product:
This is the safety alert
symbol. It is used to alert
you to potential personal
injury hazards. Obey all
safety messages that
follow this symbol to avoid
possible injury or death.
DANGER indicates
a hazardous
situation which, if
not avoided, will result in
death or serious injury.
WARNING
indicates a
hazardous
situation which, if not
avoided, could result in death
or serious injury.
CAUTION, without
the safety alert
symbol, is used to
address practices not related
to personal injury.
READ ALL INSTRUCTIONS
Personal Safety
Dress Properly - Do not wear loose 1.
clothing or jewelry. They can be
caught in moving parts. Use of rubber gloves and substantial footwear is
recommended when working outdoors. Wear protective hair covering
to contain long hair.
Wear ANSI-approved dust 2.
mask/respirator when
vacuuming to prevent injury
resulting from possible dust
inhalation.
3. Wear ANSI-approved safety
goggles and heavy-duty
work gloves. Do not Overreach - Keep proper footing
and balance at all times.
Page 2SKU 99989 For technical questions, please call 1-800-444-3353.
Page 3
Stay Alert - Watch what you are 4.
doing. Use common sense. Do not
operate Tool when you are tired.
5. Wear thick jeans and
steel-toed work boots to
help prevent injury
caused by ying debris.
Read and adhere to all safety 6.
precautions provided by the manufacturer of your dust collection
system.
that it will operate properly and perform its intended function. Check for
alignment of moving parts, binding
of moving parts, breakage of parts,
mounting, and any other condition
that may affect its operation. A guard
or other part that is damaged should
be properly repaired or replaced by a
qualied technician unless indicated
elsewhere in this manual.
SAVE THESE
Rolling Sweep Use and Care
Keep Children Away - All visitors 1.
should be kept at a distance from
work area.
When servicing use only identical 2.
replacement parts.
Use Right Tool - Do not use Tool for 3.
any job except that for which it is
intended.
Do not Force Tool - It will do the 4.
job better and with less likelihood
of injury at the rate for which it was
designed.
Store Idle Tools Indoors - When not in 5.
use, Tools should be stored indoors
in dry, and high or locked-up place
- out of reach of children.
INSTRUCTIONS.
Specications
Hose Size Accepts 4” Dust Collector Hose
Nozzle Size 20” Wide
Dimensions 57” L x 20” W
UNPACKING
When unpacking, check to make sure
that the item is intact and undamaged. If
any parts are missing or broken, please
call Harbor Freight Tools at the number
shown on the cover of this manual as soon
as possible.
SET UP INSTRUCTIONS
Maintain Tool With Care - Keep tool 6.
maintained to reduce the risk of
injury. Follow instructions for lubricating and changing accessories. Keep
handles dry, clean, and free from oil
and grease.
Check Damaged Parts - Before 7.
further use of the Tool, a guard or
other part that is damaged should
be carefully checked to determine
Read the ENTIRE
IMPORTANT SAFETY
INSTRUCTIONS section at the
beginning of this manual
including all text under
subheadings therein before set
up or use of this product.
Page 3SKU 99989 For technical questions, please call 1-800-444-3353.
Page 4
Functions
To Attach a Flexible Vacuum Hose
This tool can be used to vacuum dust 1.
and small debris from a shop oor,
when a 4” exible hose (not included)
from the shop dust collection system
is attached.
Note: For additional information regarding
the parts listed in the following pages,
refer to the Assembly Diagram near
the end of this manual.
Assembly
Upper Handle Section (13) must be 1.
attached to Lower Handle Section (8)
prior to use.
Insert Upper Handle Section (13) into 2.
Lower Handle Section (8) and fasten
together using Phillips Head Screw
(15).
OPERATING INSTRUCTIONS
Read the ENTIRE
IMPORTANT SAFETY
INFORMATION section at the
beginning of this manual
including all text under
subheadings therein before set
up or use of this product.
Before operating the Rolling Sweep, 1.
put on ANSI-approved safety goggles
and other safety gear which are sold
separately.
The Swivel Connecting Tube (5) is 1.
designed to accept a standard 4” exible collection hose (not included).
Insert your exible hose into the Con-2.
necting Tube (5). If necessary, use a
band clamp or adapter (not included)
to secure the hose.
Operating the Sweep
The Handle Assembly (8, 13) is de-1.
signed to swivel on the Connecting
Tube (5).
To adjust the swivel angle, loosen 2.
the Knob (4), move the Handle to the
desired position, and retighten the
Knob.
The Supporting Tube (11) provides 3.
support by pushing on the top of the
Dust Hood (1) as the tool is used.
After attaching the 4” exible hose, 4.
turn on the shop dust collection system (not included). The Sweep will
now operate.
Roll the sweep along the shop oor to 5.
pick up dust and small debris.
Pick up large debris by hand to pre-6.
vent clogging the Dust Hood (1). If
the Dust Hood becomes clogged,
turn off the dust collection system and
clear the Dust Hood.
Page 4SKU 99989 For technical questions, please call 1-800-444-3353.
Page 5
MAINTENANCE AND
SERVICING
PLEASE READ THE FOLLOWING
CAREFULLY
TO PREVENT
SERIOUS INJURY
FROM TOOL
FAILURE: Do not use damaged
equipment. If abnormal noise
or binding occurs, have the
problem corrected before
further use.
Procedures not specically
explained in this manual must
be performed only by a
qualied technician.
Cleaning, Maintenance, and
Lubrication
BEFORE EACH USE,1. inspect the
general condition of the Tool. Check
for loose screws, misalignment or
binding of moving parts, cracked or
broken parts and any other condition
that may affect its safe operation.
THE MANUFACTURER AND/OR DISTRIBUTOR
HAS PROVIDED THE PARTS LIST AND
ASSEMBLY DIAGRAM IN THIS MANUAL AS
A REFERENCE TOOL ONLY. NEITHER THE
MANUFACTURER OR DISTRIBUTOR MAKES
ANY REPRESENTATION OR WARRANTY OF
ANY KIND TO THE BUYER THAT HE OR SHE
IS QUALIFIED TO MAKE ANY REPAIRS TO THE
PRODUCT, OR THAT HE OR SHE IS QUALIFIED
TO REPLACE ANY PARTS OF THE PRODUCT.
IN FACT, THE MANUFACTURER AND/OR
DISTRIBUTOR EXPRESSLY STATES THAT
ALL REPAIRS AND PARTS REPLACEMENTS
SHOULD BE UNDERTAKEN BY CERTIFIED
AND LICENSED TECHNICIANS, AND NOT BY
THE BUYER. THE BUYER ASSUMES ALL RISK
AND LIABILITY ARISING OUT OF HIS OR HER
REPAIRS TO THE ORIGINAL PRODUCT OR
REPLACEMENT PARTS THERETO, OR ARISING
OUT OF HIS OR HER INSTALLATION OF
REPLACEMENT PARTS THERETO.
AFTER USE,2. clean external surfaces
of the Tool with clean, moist cloth.
Store this tool in a dry location away 3.
from moisture or corrosive materials.
Record Product’s Serial Number Here:
Note: If product has no serial number, record month and year of purchase instead.
Note: Some parts are listed and shown for illustration purposes only, and are not avail-
able individually as replacement parts.
Page 5SKU 99989 For technical questions, please call 1-800-444-3353.
Page 6
ASSEMBLY DIAGRAM
Part # Description QTY.
1 Dust Hood 1
2 Caster Wheel 1.5” 2
3 Lock Nut 3/8” 2
4 Knob 3/8” x 1-1/2” 1
5 Connecting Tube 1
6 Phillips Head Screw 3/16” x
3/8”
7 Cap 1” 1
8 Lower Handle Section 1
1
Part # Description QTY.
9 Lock Nut m4 1
10 Phillips Head Screw m4 x 35 1
11 Supporting Tube 1
12 Cap 1/2” 1
13 Upper Handle Section 1
14 Handle Grip 1
15 Phillips Head Screw 1/4” x
3/8”
1
Page 6SKU 99989 For technical questions, please call 1-800-444-3353.
Page 7
LIMITED 90 DAY WARRANTY
Harbor Freight Tools Co. makes every effort to assure that its products meet high
quality and durability standards, and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of 90 days from
the date of purchase. This warranty does not apply to damage due directly or indirectly,
to misuse, abuse, negligence or accidents, repairs or alterations outside our facilities,
criminal activity, improper installation, normal wear and tear, or to lack of maintenance.
We shall in no event be liable for death, injuries to persons or property, or for incidental,
contingent, special or consequential damages arising from the use of our product. Some
states do not allow the exclusion or limitation of incidental or consequential damages, so
the above limitation of exclusion may not apply to you. THIS WARRANTY IS EXPRESSLY IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING THE
WARRANTIES OF MERCHANTABILITY AND FITNESS.
To take advantage of this warranty, the product or part must be returned to us with
transportation charges prepaid. Proof of purchase date and an explanation of the complaint must accompany the merchandise. If our inspection veries the defect, we will either repair or replace the product at our election or we may elect to refund the purchase
price if we cannot readily and quickly provide you with a replacement. We will return repaired products at our expense, but if we determine there is no defect, or that the defect
resulted from causes not within the scope of our warranty, then you must bear the cost
of returning the product.
This warranty gives you specic legal rights and you may also have other rights
which vary from state to state.
3491 Mission Oaks Blvd. • PO Box 6009 • Camarillo, CA 93011 • (800) 444-3353
Page 7SKU 99989 For technical questions, please call 1-800-444-3353.
Loading...