Harbor Freight Tools 99917 User Manual

Specifications

On - Off

LCD Size 1-1/8" H X 2-7/8" W

Power Supply

Capacity

Tap on - Auto Off after 5
seconds of non use.

2 - 3V Lithium-Ion Batteries
(Included) (2 x CR-2032)

5~330 lb. in .2 lb. increments

2.5~150 kg in .1 kg increments

Important Safety Information

WARNING! To prevent serious injury:

1. Do not use if wet.

2. Do not exceed 330 lb. maximum weight.

3. This product is not a toy. Do not
drop, or allow children to play with,
or use this Scale unattended.

4. Use only on level, hard, flat surface.
Using on cushioned surface (such as
rug or carpet) may cause uneven
load, causing inaccurate readings
and increasing the risk of damage.

5. Do not jump on this Scale.

6. Maintain product labels
and nameplates. These carry
important safety information.
If unreadable or missing, contact
Harbor Freight Tools for a replacement.

7. Use as intended only;
not for trade or postal use.

Operation Instructions

1. Place the Bathroom Scale on a
hard, flat, smooth surface.

2. Tap the Scale with your foot to turn
it on. It will flash “18888” and then
“0.0” to signify it is ready. Step evenly
onto the Scale and stand motionless
to see your weight appear in Display.

3. The scale will return to “0.0” once you
step off and then automatically turn off.

Page 2 For technical questions, please call 1-800-444-3353. Item 99917

NOTE: When the Batteries are low, the
Display will read “LO”. Follow the battery
replacement procedures in the
“MAINTENANCE” section of this manual.

NOTE: Press the Mode Switch to the
left of the battery housing (see photo) to
toggle between “kg” (kilogram), “lb” (pound)
and “st” (stone) weight measurements.

REV 08g, 09c, 11a, 11b, 12h

Maintenance Instructions

Batteries Mode Switch

Periodically wipe off the Bathroom
Scale with a clean, slightly damp cloth.
Completely dry the bottom and top of
the Scale before continuing its use.

Note: Replacement parts are
not available for this item.

Battery Replacement

1. Place the Bathroom Scale upside
down on a soft, flat surface.

2. Remove the Battery Cover.

3. Remove the two Batteries.

4. Place two new CR2032 batteries
inside the Battery Compartment
in the proper polarity.

Record Serial Number Here:

Note: If product has no serial number,

record month and year of purchase instead.

5. Replace the Battery Cover.

WARNING! Dispose of old
batteries according to all local,
state and federal regulations.
Never incinerate old/used batteries.

Page 3For technical questions, please call 1-800-444-3353.Item 99917

Limited 90 Day Warranty

Harbor Freight Tools Co. makes every effort to assure that its products meet high quality
and durability standards, and warrants to the original purchaser that this product is free from
defects in materials and workmanship for the period of 90 days from the date of purchase.
This warranty does not apply to damage due directly or indirectly, to misuse, abuse, negligence
or accidents, repairs or alterations outside our facilities, criminal activity, improper installation,
normal wear and tear, or to lack of maintenance. We shall in no event be liable for death,
injuries to persons or property, or for incidental, contingent, special or consequential damages
arising from the use of our product. Some states do not allow the exclusion or limitation of
incidental or consequential damages, so the above limitation of exclusion may not apply to you.
THIS WARRANTY IS EXPRESSLY IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR
IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS.

To take advantage of this warranty, the product or part must be returned to us with transportation
charges prepaid. Proof of purchase date and an explanation of the complaint must accompany
the merchandise. If our inspection verifies the defect, we will either repair or replace
the product at our election or we may elect to refund the purchase price if we cannot readily
and quickly provide you with a replacement. We will return repaired products at our expense,
but if we determine there is no defect, or that the defect resulted from causes not within
the scope of our warranty, then you must bear the cost of returning the product.

This warranty gives you specific legal rights and you may also
have other rights which vary from state to state.

3491 Mission Oaks Blvd. • PO Box 6009 • Camarillo, CA 93011 • [phone]