Harbor Freight Tools 99721 Product manual

SAVE THIS MANUAL

Keep this manual for the safety warn­ings and precautions, assembly, operat­ing, inspection, maintenance and cleaning
procedures. Write the product’s serial
number in the back of the manual near the
assembly diagram (or month and year of
purchase if product has no number). Keep
this manual and the receipt in a safe and
dry place for future reference.

IMPORTANT SAFETY

INFORMATION

In this manual, on the labeling,
and all other information provid­ed with this product:

This is the safety alert

symbol. It is used to alert
you to potential personal
injury hazards. Obey all
safety messages that
follow this symbol to avoid
possible injury or death.

NOTICE is used to
address practices

not related to personal injury.

CAUTION, without

the safety alert
symbol, is used to address
practices not related to
personal injury.

General Safety Warnings

WARNING Read all safety
warnings and instructions.

Failure to follow the warnings and
instructions may result in serious
injury.

Save all warnings and
instructions for future reference.

1. Work area safety

a. Keep work area clean and well lit.

Cluttered or dark areas invite acci­dents.

b. Keep children and bystanders

away during use. Distractions can

cause you to lose control.

DANGER indicates

a hazardous
situation which, if not
avoided, will result in death or
serious injury.

WARNING

indicates a
hazardous situation which, if
not avoided, could result in
death or serious injury.

CAUTION, used

with the safety
alert symbol, indicates a
hazardous situation which, if
not avoided, could result in
minor or moderate injury.

SKU 99721 For technical questions, please call 1-888-866-5797. Page 2

2. Personal safety

a. Stay alert, watch what you are

doing and use common sense
during use. Do not use while you

are tired or under the inuence of

drugs, alcohol or medication. A
moment of inattention during use may
result in serious personal injury.

b. Use personal protective equip-

ment. Always wear eye protection.

Safety equipment such as dust mask,
non-skid safety shoes, or hearing
protection used for appropriate condi­tions will reduce personal injuries.

c. Do not overreach. Keep proper

footing and balance at all times.

This enables better control of the
product in unexpected situations.

2. Push, do not drive, the motorcycle
onto the Carrier.

d. Dress properly. Do not wear loose

clothing or jewelry. Keep your
hair, clothing and gloves away
from moving parts. Loose clothes,

jewelry or long hair can be caught in
moving parts.

e. Only use safety equipment that

has been approved by an appropri­ate standards agency. Unapproved

safety equipment may not provide
adequate protection. Eye protection
must be ANSI-approved.

3. Carrier use and care

a. Store the Carrier out of the reach

of children and do not allow per­sons unfamiliar with the it or these
instructions to operate. Equipment

is dangerous in the hands of un­trained users.

b. Maintain the Carrier. Check for

misalignment or binding parts,
breakage of parts and any other
condition that may affect opera­tion. If damaged, have the product
repaired before use. Many ac-

cidents are caused by poorly main­tained products.

c. Use the Carrier in accordance with

these instructions, taking into ac­count the working conditions and
the work to be performed. Use of

this equipment for operations differ­ent from those intended could result
in a hazardous situation.

3. Obey all DOT regulations pertaining
to mounting the Carrier onto a ve­hicle.

4. Only use this product with a vehicle
that has a 2” square receiver hitch,
rated to at least Class III, and can
bear the additional weight of both the
Carrier and motorcycle.

5. Do not sit on motorcycle while load­ing, unloading, or while supported on
carrier.

6. Do not exceed maximum load for this
product (400 lb.). Loading a heavier
object on this product can result in
dangerous conditions to both the
operator and the item loaded.

7. Maintain labels and nameplates on
the tool. These carry important safety
information. If unreadable or miss­ing, contact Harbor Freight Tools for a
replacement.

8. Keep bystanders out of the area dur­ing assembly, loading and unloading.

9. The warnings, precautions, and in­structions discussed in this instruction
manual cannot cover all possible con­ditions and situations that may occur.
It must be understood by the operator
that common sense and caution are
factors which cannot be built into this
product, but must be supplied by the
operator.

Motorcycle Carrier Safety

SAVE THESE

Warnings

INSTRUCTIONS.

1. Secure motorcycle frame and wheels
securely using ratcheting tie downs
(not included) and included pins.

SKU 99721 For technical questions, please call 1-888-866-5797. Page 3