Harbor Freight Tools 98855 Instructions And Precautions

DIGITAL LCD CLOCK / ALARM

98855

INSTRUCTIONS AND PRECAUTIONS

Distributed exclusively by Harbor Freight Tools®.

3491 Mission Oaks Blvd., Camarillo, CA 93011

Visit our website at: http://www.harborfreight.com

SAVE THESE INSTRUCTIONS. READ ALL

PRECAUTIONS AND INSTRUCTIONS.

Copyright© 2008 by Harbor Freight Tools®. All rights reserved. No portion of this document or any artwork contained
herein may be reproduced in any shape or form without the express written consent of Harbor Freight Tools.
Diagrams within this document may not be drawn proportionally. Due to continuing improvements, actual product
may differ slightly from the product described herein. Tools required for assembly and service may not be included.

For technical questions or replacement parts, please call 1-800-444-3353.

SPECIFICATIONS

Battery (1) 3V Lithium CR2025 (included)

Material

Aluminum Frame and Cover Plate;
Polystyrene Housing

When unpacking, check to make sure that
the item is intact and undamaged. If any parts are
missing or broken, please call Harbor Freight Tools
at the number shown on the cover of this document
as soon as possible.

UNPACKING

IMPORTANT SAFETY INFORMATION

Safety Precautions

Wear ANSI-approved safety goggles during 1.
battery replacement.

Properly install battery according to indicated 2.
polarity and properly recycle used battery.

Do not install Battery (2) without using Bat-3.
tery Holder (3).

This product is not a toy. Do not allow chil-4.
dren to play with or near this item.

Use for intended purposes only.5.

Inspect before use; do not use if damaged.6.

Maintain product labels and nameplates. 7.
These carry important safety information.
If unreadable or missing, contact Harbor
Freight Tools for a replacement.

Read ENTIRE IMPORTANT SAFETY

INFORMATION section including all
text under subheadings therein before
set up or use of this product.

Replacing Battery

Pull Batter Holder (3) out from side of Clock. 1.
See Figure 1, below.

Clock (1)

Figure 1

Remove old Battery (2) and properly recycle.2.

Insert new 3V, CR2025 Lithium battery into 3.
Battery Holder (3). Make sure side with cells
faces up.

Slide Holder into battery chamber until it 4.
snaps in place. Do NOT insert Battery into
chamber without Holder.

Please note: You may need to keep nger

pressed down on Battery while sliding Holder
into chamber. Battery may slide out during
insertion.

Battery (2)

Battery Holder (3)

Operation

Clock controls (C/F, Mode, Alarm, Set, Up, 1.

Down) are located on base of Clock.

Use 2. C/F button to switch temperature setting

from Celsius to Fahrenheit display.

Use 3. MODE button to switch from various

display settings (Time, Alarm, Month-Date-

Date-Temp, Timer.)

Use 4. ALARM button to set alarm. Also press

to shut of Alarm once it sounds

Use 5. SET to change time, date or day in set-

tings. Use UP or Down to change numbers

in each setting. Once a date, time or number

is found, press SET again.

PARTS LIST & DIAGRAM

Part Description Qty.

1 Clock 1
2 Battery 1
3 Battery Holder 1

1

Record Serial Number Here:

Note: If product has no serial number, record month and year

of purchase instead.

Note: Some parts are listed and shown for illustration pur-

poses only, and are not available individually as replace-

ment parts.

PLEASE READ THE FOLLOWING CAREFULLY

THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS
LIST AND ASSEMBLY DIAGRAM IN THIS DOCUMENT AS A REFERENCE
TOOL ONLY. NEITHER THE MANUFACTURER OR DISTRIBUTOR MAKES ANY
REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER THAT HE
OR SHE IS QUALIFIED TO MAKE ANY REPAIRS TO THE PRODUCT, OR THAT
HE OR SHE IS QUALIFIED TO REPLACE ANY PARTS OF THE PRODUCT. IN
FACT, THE MANUFACTURER AND/OR DISTRIBUTOR EXPRESSLY STATES
THAT ALL REPAIRS AND PARTS REPLACEMENTS SHOULD BE UNDERTAKEN
BY CERTIFIED AND LICENSED TECHNICIANS, AND NOT BY THE BUYER. THE
BUYER ASSUMES ALL RISK AND LIABILITY ARISING OUT OF HIS OR HER
REPAIRS TO THE ORIGINAL PRODUCT OR REPLACEMENT PARTS THERETO,
OR ARISING OUT OF HIS OR HER INSTALLATION OF REPLACEMENT PARTS
THERETO.

2 3

SKU 98855 For technical questions, please call 1-800-444-3353. Page 2