Harbor Freight Tools 97841 Owner's Manual
IMPORTANT SAFETY INFORMATION
Assembly Precautions
1. Assemble only according to these instructions.
Improper assembly can create hazards.
2. Wear ANSI-approved safety goggles, NIOSHapproved dust mask/respirator, and heavyduty work gloves during assembly.
3. Keep assembly area clean and well lit.
Use Precautions
Failure to heed these warnings may result in
personal injury and/or property damage:
1. Study, understand, and follow all instructions
before operating this device.
2. Do not exceed 1800 lb. rated capacity.
3. Use only on hard, level surfaces.
4. Secure chock and strap down
motorcycle before transporting.
5. Wear ANSI-approved safety goggles and heavyduty work gloves during setup and use.
6. Keep clear of stand/chock and wheel
while loading and unloading.
7. Load and unload wheel slowly.
4. Keep bystanders out of the area during assembly.
5. Do not assemble when tired or when under the
influence of alcohol, drugs or medication.
6. Weight capacity and other product capabilities apply
to properly and completely assembled product only.
8. Use for motorcycle tires only. Do
not use for aircraft purposes.
9. Adjust for tire size before use.
10. Use kickstand also if equipped.
11. Do not ride a motorcycle onto the Stand.
12. Do not sit on the motorcycle while
it is loaded on the Stand.
13. Inspect before every use; do not use
if parts loose or damaged.
14. The warnings, precautions, and instructions
discussed in this manual cannot cover all
possible conditions and situations that may occur.
The operator must understand that common sense
and caution are factors which cannot be built into
this product, but must be supplied by the operator.
Parts List and Diagram
Part Description Qty
1 Base 1
2 Wheel Adapter 1
3 Cradle Stop 1
4 Support Arm 1
5 Washer Ø 10 2
6 Nut M10 2
7 Eyelet 2
8 Pad 2
9 Pin 2
10 Washer Ø 12 4
11 R-pin 4
12 Bolt M10x45 2
Record Serial Number Here:
Note: If product has no serial number, record month and year of purchase instead.
Note: Some parts are listed and shown for illustration purposes only, and
are not available individually as replacement parts.
Page 2 For technical questions, please call 1-800-444-3353. Item 97841
Loading...