Harbor Freight Tools 97767 Product manual
SURFACE
Model
97767
MOUNTED
ROPE RINGS
INSTRUCTIONS AND PRECAUTIONS
Distributed exclusively by Harbor Freight Tools®.
3491 Mission Oaks Blvd., Camarillo, CA 93011
Visit our website at: http://www.harborfreight.com
SAVE THESE INSTRUCTIONS. READ ALL
PRECAUTIONS AND INSTRUCTIONS.
Copyright© 2008 by Harbor Freight Tools®. All rights reserved. No portion of this document or any artwork contained
herein may be reproduced in any shape or form without the express written consent of Harbor Freight Tools.
Diagrams within this document may not be drawn proportionally. Due to continuing improvements, actual product
may differ slightly from the product described herein.
For technical questions or replacement parts, please call 1-800-444-3353.
SPECIFICATIONS
Recommended Capacity 200 Pounds per Ring
UNPACKING
When unpacking, check to make sure that
the item is intact and undamaged. If any parts are
missing or broken, please call Harbor Freight Tools
at the number shown on the cover of this document
as soon as possible.
IMPORTANT SAFETY
Do not use when tired or when under the 5.
inuence of drugs or medication.
Use Precautions
This product is not a toy. Do not allow 1.
children to play with or near this item.
Use for intended purpose(s) only.2.
Do not use as a support for lifting operations.3.
Secure the Ring rmly before use.4.
Inspect before use; do not use if loose or 5.
damaged.
Do not exceed recommended capacity of 6.
200 pounds for each Rope Ring.
INFORMATION
Be aware of dynamic loading! Suddenly 7.
Assembly Precautions
Set up only according to these instructions. 1.
Improper assembly can create hazards.
Wear ANSI-approved safety goggles and 2.
heavy-duty work gloves during set up.
Keep set up area clean and well lit.3.
Keep bystanders out of the area during set 4.
up.
starting or jerking against load may briey
create excess load causing product failure.
Maintain product labels and nameplates. 8.
These carry important safety information.
If unreadable or missing, contact Harbor
Freight Tools for a replacement.
ASSEMBLY INSTRUCTIONS
Read the ENTIRE IMPORTANT
SAFETY INFORMATION section at the
beginning of this document including
all text under subheadings therein
before set up or use of this product.
Assembly
The surface that the Rope Ring is mounted 1.
to must be able to hold 200 pounds. Only
mount to solid oor or wall surfaces.
Use the Rope Ring as a template to mark 2.
where to drill the holes.
Verify that the work surface has no hidden 3.
utility lines before drilling.
After drilling, use the included hardware to 4.
secure the Rope Ring to the surface.
Lift the ring to secure a rope or hook to the 5.
ring.
Do not use for aircraft purposes.6.
PLEASE READ THE FOLLOWING
CAREFULLY
THE MANUFACTURER AND/OR DISTRIBUTOR HAS
PROVIDED THE PARTS LIST AND ASSEMBLY DIAGRAM IN
THIS DOCUMENT AS A REFERENCE TOOL ONLY. NEITHER
THE MANUFACTURER OR DISTRIBUTOR MAKES ANY
REPRESENTATION OR WARRANTY OF ANY KIND TO THE
BUYER THAT HE OR SHE IS QUALIFIED TO MAKE ANY
REPAIRS TO THE PRODUCT, OR THAT HE OR SHE IS
QUALIFIED TO REPLACE ANY PARTS OF THE PRODUCT.
IN FACT, THE MANUFACTURER AND/OR DISTRIBUTOR
EXPRESSLY STATES THAT ALL REPAIRS AND PARTS
REPLACEMENTS SHOULD BE UNDERTAKEN BY CERTIFIED
AND LICENSED TECHNICIANS, AND NOT BY THE BUYER.
THE BUYER ASSUMES ALL RISK AND LIABILITY ARISING
OUT OF HIS OR HER REPAIRS TO THE ORIGINAL PRODUCT
OR REPLACEMENT PARTS THERETO, OR ARISING OUT
OF HIS OR HER INSTALLATION OF REPLACEMENT PARTS
THERETO.
PARTS LIST & ASSEMBLY
DIAGRAM
Part Description Qty.
1 Rope Ring 4
2 Bolt 8
3 Nut 8
1
2
Record Serial Number Here:
Note: If product has no serial number, record
month and year of purchase instead.
Note: Some parts are listed and shown for
illustration purposes only, and are not
available individually as replacement parts.
3
Page 2SKU 97767 For technical questions, please call 1-800-444-3353.
Loading...