Harbor Freight Tools 97160 Product manual
2-1/2" Table Swivel Vise
Item 97160
Read this material before using this product.
Failure to do so can result in serious injury.
SAVE THIS MANUAL.
When unpacking, make sure that the product is intact and undamaged.
If any parts are missing or broken, please call 1-800-444-3353 as soon as possible.
Visit our website at: http://www.harborfreight.com
Email our technical support at: tech@harborfreight.com
Copyright© 2010 by Harbor Freight Tools®. All rights reserved. No portion of this manual or any artwork contained herein may be reproduced in any shape
or form without the express written consent of Harbor Freight Tools. Diagrams within this manual may not be drawn proportionally. Due to continuing
improvements, actual product may differ slightly from the product described herein. Tools required for assembly and service may not be included.
Revised Manual 11f
SAVE THIS MANUAL
Keep this manual for the safety warnings and precautions,
assembly, operating, inspection, maintenance and
cleaning procedures. Write the product’s serial
number in the back of the manual near the assembly
diagram (or month and year of purchase if product
has no number). Keep this manual and the receipt
in a safe and dry place for future reference.
WARNING! Read all instructions
Failure to follow all instructions listed
below may result in serious injury.
3. Check for misalignment or binding of moving
parts, breakage of parts and any other condition
that may affect the product’s operation. If
damaged, have the product repaired before use.
4. Use the product in accordance with these instructions
and in the manner intended for the particular
type of product, taking into account the working
conditions and the work to be performed. Use
of the product for operations different from those
intended could result in a hazardous situation.
SERVICE
SAVE THESE INSTRUCTIONS
WORK AREA SAFETY
1. Keep children and bystanders away
while operating. Distractions can
cause you to lose control.
2. Keep work area clean and well lit. Cluttered
or dark areas invite accidents.
PERSONAL SAFETY
1. Wear ANSI-approved safety goggles, NIOSHapproved dust mask/respirator, and heavyduty work gloves during installation or
during use, when conditions warrant.
2. Stay alert and use common sense when
operating. Do not use when tired or under the
inuence of drugs, alcohol or medication.
3. Do not overreach. Keep proper footing
and balance at all times. This enables
better control in unexpected situations.
4. Dress properly. Do not wear loose clothing or
jewelry. Keep your hair, clothing and gloves
away from moving parts. Loose clothes, jewelry
or long hair can be caught in moving parts.
1. Have product serviced by a qualied repair person
using only identical replacement parts. This will
ensure that the safety of the product is maintained.
2. Maintain labels and nameplates on the
product. These carry important safety
information. If unreadable or missing, contact
Harbor Freight Tools for a replacement.
MISCELLANEOUS
1. Keeps hands clear while closing.
2. Jaws can damage workpieces. Do not
overtighten. Keep the face of the Jaws clean.
3. Vise may chip if struck with another hardened
tool, damaging Vise and possibly causing
injury. Inspect before use; discard if chipped.
4. The warnings, precautions, and instructions
discussed in this instruction manual cannot
cover all possible conditions and situations
that may occur. It must be understood by the
operator that common sense and caution are
factors which cannot be built into this product,
but must be supplied by the operator.
SAVE THESE
INSTRUCTIONS.
PRODUCT USE AND CARE
1. This product is not a toy. Keep
it out of reach of children.
2. Use the correct product for your application.
The correct product will do the job better and
safer at the rate for which it was designed.
Do not modify this product or use it for a
purpose for which it is not intended.
Page 2SKU 97160 For technical questions, please call 1-800-444-3353.
Loading...