Harbor Freight Tools 94979 User Manual
®
PORTABLE HAND CHAIN SAW
Model 94979
OPERATING INSTRUCTIONS
Due to continuing improvements, actual product may differ slightly from the product described herein.
3491 Mission Oaks Blvd., Camarillo, CA 93011
Visit our Web site at: http://www.harborfreight.com
TO PREVENT SERIOUS INJURY,
READ AND UNDERSTAND ALL WARNINGS
AND INSTRUCTIONS BEFORE USE.
Copyright 2006 by Harbor Freight Tools®. All rights reserved. No portion of this
manual or any artwork contained herein may be reproduced in any shape or form
©
without the express written consent of Harbor Freight Tools.
For technical questions, please call 1-800-444-3353.
PRODUCT SPECIFICATIONS
Item Description
Chain Specifications 27-1/4” L x 1/4” W x 11/16” H
38 Drive Link
3/8” Pitch
0.058” Gauge
Bi-Directional Cutting Capability
Finish Blued Steel Chain
Zinc Plated Handle Frames & Hardware
White, Molded, PVC Hand Grips
Unit Weight 1.7 Lb.
SAVE THIS MANUAL
You will need this manual for the safety warnings and precautions, assembly, operating,
inspection, maintenance and cleaning procedures, parts list and assembly diagram.
Keep your invoice with this manual. Write the invoice number on the inside of the front
cover. Keep this manual and invoice in a safe and dry place for future reference.
GENERAL SAFETY RULES
IMPORTANT SAFETY INSTRUCTIONS
WARNING!
READ AND UNDERSTAND ALL INSTRUCTIONS
Failure to follow all instructions detailed in this manual may
result in serious personal injury.
SAVE THESE INSTRUCTIONS
WORK AREA
1. Keep your work area clean and well lit. Cluttered and dark work areas invite
accidents.
PERSONAL SAFETY
2. Stay alert. Watch what you are doing, and use common sense when operating
tools and equipment. Do not use the Hand Chain Saw while tired or under the
influence of drugs, alcohol, or medication. A moment of inattention while
operating tools and equipment may result in serious personal injury.
SKU 94979 For technical questions, please call 1-800-444-3353 PAGE 2
TOOL USE AND CARE
3. Dress properly. Do not wear loose clothing or jewelry. Contain long hair. Keep
your hair, clothing, and gloves away from moving parts. Loose clothes, jewelry, or
long hair can be caught in moving parts.
4. Do not overreach. Keep proper footing and balance at all times. Proper footing
and balance enables better control of the Hand Chain Saw in unexpected situations.
5. Always wear eye protection. Wear ANSI approved safety impact
goggles when using this product.
Always wear hand protection. Saw teeth are extremely sharp. Handle
6. with extreme care, and always wear heavy duty work gloves. In addition,
wear an ANSI approved hard hat and steel toe boots for additional protection.
7. Do not force the Hand Chain Saw. Use the correct product for your appli-
cation. The correct product will do the job better and safer at the rate for which it
is designed.
8. Store idle tools and equipment out of reach of children and other untrained
people. Tools and equipment are dangerous in the hands of untrained users.
9. Maintain the Hand Chain Saw with care. Keep this product clean and sharp.
A properly maintained tool is easier to control. Do not use damaged tools and
equipment. Tag damaged tools and equipment “Do not use” until repaired.
10. Check for misalignment or binding of moving parts, loose or broken parts,
and any other condition that may affect the Hand Chain Saw’s operation.
If damaged, have the Saw serviced before using. Many accidents are caused by
poorly maintained tools and equipment.
11. Use only accessories that are recommended by the manufacturer for your
model. Accessories that may be suitable for one product may become hazardous when used on another product.
SERVICE
12. Product service must be performed only by qualified service technician.
Service or maintenance performed by unqualified personnel could result in
a risk of injury.
13. When servicing the Hand Chain Saw, use only identical replacement parts.
Follow instructions in the
manual. Use of unauthorized parts or failure to follow maintenance instructions
SKU 94979 For technical questions, please call 1-800-444-3353 PAGE 3
“Inspection, Maintenance, And Cleaning”
section of this
Loading...