Harbor Freight Tools 94883 User Manual

®

DRYWALL DOLLY

900 LB. CAPACITY

94883

ASSEMBLY & OPERATING INSTRUCTIONS

Due to continuing improvement, actual product may differ slightly from the product described herein.

3491 Mission Oaks Blvd., Camarillo, CA 93011

Visit our Web Site at www.harborfreight.com

Copyright© 2006 by Harbor F reight Tools®. All rights reserved. No portion of this manual or
any artwork contained herein may be reproduced in any shape or form without the
express written consent of Harbor Freight Tools.

For technical questions and replacement parts please call 1-800-444-3353.

THANK YOU for choosing a HARBOR FREIGHT TOOLS product. For future reference, please
complete the owner’s record below:

Model______________ Serial No._____________ Purchase Date_______________

SAVE THE RECEIPT, WARRANTY AND THESE INSTRUCTIONS. It is important that you read the
entire manual to become familiar with the unit BEFORE you begin assembly .

Tec hnical Specifications

Overall Deck Dimensions: 50” L X 15-1/2” Deep
Flat Area: 50” L X 8-1/4” Deep
Front Angle Area: 50” L X 8”, 30° Angle
Deck Steel Gauge: 12 Gauge
Ground Clearance: 9-1/4” High
Maximum Weight Capacity: 900 Lbs.
Wheels: 8” diameter X 1.75” W, solid black rubber
Weight: 68.7 Lbs.

Safety Warnings and Precautions

WARNING: When using product, basic safety precautions should always be followed to
reduce the risk of personal injury and damage to equipment.

Read all instructions before using this product!

1. Keep work area clean. Cluttered areas invite injuries.

2. Observe work area conditions. Keep work area well lighted.

3. Store idle equipment. When not in use, the Drywall Dolly must be stored in a safe and clean
location. Always lock up products and keep out of reach of children.

4.

Use the right product for the job. There are certain applications for which the Drywall Dolly
was designed. Do not modify the Dolly and do not use the Dolly for a purpose for which it was
not intended.

5. Chec k for damaged parts. Before using any product, any part that appears damaged should
be carefully checked to determine that it will operate properly and perform its intended function.
Check for any broken or damaged parts and any other conditions that may affect its operation.
Replace or repair damaged or worn parts immediately.

6. Replacement parts and accessories. When servicing, use only identical replacement parts.
Use of any other parts will void the warranty.

7. Do not operate product if under the influence of alcohol or drugs. Read warning labels on
prescriptions to determine if your judgment or reflexes are impaired while taking drugs. If there
is any doubt, do not operate the product.

8. Use eye protection. Always wear ANSI-approved impact safety goggles when assembling
and using this product.

SKU 94883 For technical questions please call 1-800-444-3353. Page 2