Harbor Freight Tools 94873 User Manual

ELECTRONIC BORE

Model

94873

®

GAUGE 1.4”~ 6”

ASSEMBLY AND OPERATION INSTRUCTIONS

Due to continuing improvements, actual product may differ slightly from the product described herein.

3491 Mission Oaks Blvd., Camarillo, CA 93011

Visit our website at: http://www.harborfreight.com

TO PREVENT SERIOUS INJURY, READ AND UNDERSTAND

ALL WARNINGS AND INSTRUCTIONS BEFORE USE.

Copyright© 2007 by Harbor Freight Tools®. All rights reserved. No portion of this
manual or any artwork contained herein may be reproduced in any shape or form
without the express written consent of Harbor Freight Tools.

For technical questions or replacement parts, please call 1-800-444-3353.

SPECIFICATIONS

Gauge capacity 1.4~6” Inside Diameter

Anvils 1.4”, 1.6”, 1.8”, 2.0”, 2.2”, 2.4”, 2.6”, 2.8”, 3.0”, 3.2”, 3.4”, 3.6”, 3.8” and 4.0”*

Includes .1”, 0.05”, 0.02” and 2” anvil extensions

*Not actual adapter lengths, but the lengths that the anvils make the device’s measuring surfaces.

Gauge Resolution 0.0005”/ 0.002 mm

Power Required One Button Battery 3 VDC CR2032 (included with spare)

Probe Depth 6” (152mm)

Overall Length 13-1/2” (Gage Only: 1-1/2” X 2-1/2”)

Save This Manual

You will need this manual for the safety warnings and precautions, assembly,
operating, inspection, maintenance and cleaning procedures, parts list and assembly
diagram. Keep your invoice with this manual. Write the invoice number on the inside of the
front cover. Write the product’s serial number in the back of the manual near the assembly
diagram, or write month and year of purchase if product has no number. Keep this manual
and invoice in a safe and dry place for future reference.

WARNINGS AND SAFETY PRECAUTIONS

Keep the work area well lit and uncluttered: dim and messy work areas invite 1.

possible injuries.

Keep tools clean. 2. The Electronic Bore Gauge should be kept free of any grease,

dirt, or other contaminants that may foil an accurate reading. Use only clean, soft

rags to wipe down the face of the tool.

Store and use only in dry locations.3.

Wear ANSI-approved safety goggles during set up and use. 4.

Check for any broken or damaged parts and any other conditions that may 5.

affect the Electronic Bore Gauge’s operation. Replace or repair damaged or

worn parts immediately using only a qualified repair facility.

Do not modify or force this product. 6. Use the tool for intended purposes only.

Keep out of reach of children. 7. Contains small parts that can be choked on or

swallowed.

WARNING: The warnings, precautions and instructions discussed in this 8.

instruction manual cannot cover all possible conditions and situations that

may occur. It must be understood by the operator that common sense and general

caution are factors that cannot be built into this product but must be supplied by

the operator.

For technical questions, please call 1-800-444-3353.

Page 2SKU 94873