CLOCK WITH
BIG DIGITAL LCD DISPLAY
94738
ASSEMBLY & OPERATING INSTRUCTIONS
Due to continuing improvement, actual product may differ slightly from the product described herein.
3491 Mission Oaks Blvd., Camarillo, CA 93011
Visit our Web Site at www.harborfreight.com
Copyright© 2006 by Harbor F reight Tools®. All rights reserved. No portion of this manual or
any artwork contained herein may be reproduced in any shape or form without the
express written consent of Harbor Freight Tools.
For technical questions and replacement parts please call 1-800-444-3353.
THANK YOU for choosing a HARBOR FREIGHT TOOLS product. For future reference, please
complete the owner’s record below:
Model______________ Serial No._____________ Purchase Date_______________
SAVE THE RECEIPT, WARRANTY AND THESE INSTRUCTIONS. It is important that you read the
entire manual to become familiar with the unit BEFORE you begin assembly .
Tec hnical Specifications
Battery: 2 “AA” (not included)
LCD (Liquid Crystal Display): Month, Day, Count Down, Temperature
Time LCD: 5-13/16”
Wall Mount or Desktop (f olding legs)
Time LCD: 5-13/16” L X 2-3/8” H
Month/Day/Temperature: 5-13/16” L X 2-3/8” H
Net Weight: 1.20 Lbs.
Safety Warnings and Precautions
WARNING: When using product, basic safety precautions should always be followed to
reduce the risk of personal injury and damage to equipment.
Read all instructions before using this product!
1. Store idle equipment. When not in use, the Digital Clock must be stored in a dry location.
Always lock up products and keep out of reach of children.
2. Use the right product for the job. There are certain applications for which the Digital
Clock was designed. Do not modify the Digital Clock and do not use the Digital Clock for a
purpose for which it was not intended.
3. Check for damaged parts. Before using any product, any part that appears damaged
should be carefully checked to determine that it will operate properly and perform its intended
function. Check for any broken or damaged parts and any other conditions that may affect its
operation. Replace or repair damaged or worn parts immediately.
4. Replacement parts and accessories. When servicing, use only identical replacement
parts. Use of any other parts will void the warranty.
5. Do not operate product if under the influence of alcohol or drugs. Read warning
labels on prescriptions to determine if your judgment or reflexes are impaired while taking
drugs. If there is any doubt, do not operate the product.
Warning: The warnings, cautions, and instructions discussed in this instruction manual cannot
cover all possible conditions and situations that may occur. It must be understood by
the operator that common sense and caution are factors which cannot be built into
this product, but must be supplied by the operator.
SKU 94738 For technical questions please call 1-800-444-3353. Page 2